What is the traffic restriction policy for non-local vehicles in Beijing during the National Day holiday?

3 Answers
OBrantley
07/29/25 3:53am
Beijing's traffic restriction policy for non-local vehicles during the National Day holiday: 1. During weekday morning and evening peak hours from 7:00 to 9:00 and 17:00 to 20:00, non-local vehicles are prohibited from driving on the main roads, auxiliary roads, and roads within the Fifth Ring Road; 2. From 9:00 to 17:00 on weekdays, non-local vehicles must comply with the city's tail number restriction policy, which is the same as that for Beijing-licensed vehicles, with the restricted area being the main roads, auxiliary roads, and roads within the Fifth Ring Road. Non-local vehicles are not allowed to enter the Second Ring Road of Beijing. If driving a non-local licensed passenger car to the vicinity of the Second Ring Road, as long as you avoid the weekday peak hours and the tail number restriction periods, you can normally drive on the Second Ring Road auxiliary roads. The traffic restriction policy for non-local licensed passenger cars only applies to the main roads of the Second Ring Road, while the auxiliary roads and the sections under the overpasses of the Second Ring Road are not included in the restriction scope.
Was this review help?
3
5
Share
DeJordan
08/12/25 3:18pm
Oh, I think the Beijing traffic restriction policy for out-of-town vehicles during the National Day holiday is quite important for friends planning self-driving trips. Every year from October 1st to 7th during the National Day holiday, Beijing suspends the weekday license plate tail number restriction policy, meaning neither local nor out-of-town vehicles are restricted. However, out-of-town vehicles entering Beijing must obtain an Entry Permit, which is generally valid for 7 days and can be applied for in advance via the 12123 Traffic APP or the website. It's important to note that the Entry Permit is only valid within the area inside the Sixth Ring Road, and the permit must be printed and placed on the vehicle's front windshield. Last year, I drove to Beijing for a trip but didn't get the permit in time, resulting in a 200-yuan fine and 3 penalty points—it really caused a lot of trouble. Additionally, during the National Day holiday, traffic in the city is heavy, especially around Tiananmen Square, where congestion is common. It's recommended to use public transportation or the subway for a more hassle-free and safer experience. Applying for the permit is quite convenient and takes just a few minutes—don't risk losing more by skipping this small step.
Was this review help?
12
2
Share
Expand All
OMackenzie
10/02/25 7:50am
As a seasoned driver frequently navigating urban roads, I find Beijing's holiday traffic policies for out-of-town vehicles relatively lenient. During public holidays, the odd-even license plate restriction is suspended, and non-local vehicles only need to obtain a Beijing Entry Permit to drive normally, with the permit valid for seven days covering the entire holiday period. Unlike the strict weekday restrictions, applying for the permit via the 12123 platform is straightforward—just enter your license plate and travel details. However, pay attention to the zoning rules: a permit is required within the Sixth Ring Road, while areas outside are unrestricted. Last year when assisting a friend with this, I noticed application delays during peak periods due to high demand, so early submission is advisable. With increased holiday traffic leading to unpredictable road conditions, compliance helps avoid the 200-yuan fine and penalty points while enhancing travel comfort. Overall, this policy balances convenience and order—just check for official updates before your trip.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

What to do if the automatic transmission is stuck in P gear?

Solutions for automatic transmission stuck in P gear: 1. If the car has a shift lock gear lock, press the switch; 2. If there is no gear lock or the button does not work, you can pry open the shift dust cover, find the emergency switch of the shift mechanism, and press the switch. The correct method for parking and shifting gears: 1. Shift into N gear before parking; 2. Tighten the handbrake and then release the pedal; 3. After the car stops completely, shift into P gear. This way, the car will not slide forward or backward due to its own weight, avoiding the situation of the gear getting stuck when parking. Automatic transmission means that the driver does not need to manually shift gears. The vehicle will automatically select the appropriate gear to drive based on the speed and traffic conditions.
10
2
Share

What is the function of the button on an automatic transmission?

The function of the button on an automatic transmission: The button on an automatic transmission is called the shift lock button, also known as the gear lock. If the gear is accidentally engaged, unintended forward or backward movement could cause an accident. This button can eliminate safety hazards caused by misoperation. When shifting out of P (Park) or into R (Reverse) or P (Park), this shift lock button must be pressed to engage the gear. Introduction to automatic transmission gears: 1. P stands for Park; after the car stops, engaging P gear applies the brake to prevent movement. 2. N stands for Neutral; temporarily stopping the vehicle by engaging this gear stops the vehicle's motion without interrupting power. 3. R stands for Reverse; this gear can only be engaged when the vehicle is stationary. 4. S stands for Sport, suitable for overtaking and climbing hills.
16
2
Share

What is a Salvage Car?

Salvage cars refer to vehicles that have suffered damage from non-natural wear and tear accidents, resulting in decreased mechanical performance and economic value. The following scenarios classify a vehicle as a salvage car: 1. Vehicles where the engine compartment or passenger compartment has been damaged due to impact; 2. Vehicles where the rear quarter panel has been damaged by more than one-third due to impact; 3. Vehicles with welded, cut, reshaped, or deformed longitudinal beams; 4. Vehicles with welded, cut, reshaped, or deformed shock absorber mounts; 5. Vehicles with welded, cut, reshaped, or deformed A, B, or C pillars; 6. Vehicles where the airbags have deployed due to impact; 7. Vehicles with severe welding, cutting, reshaping, or deformation in other non-removable parts; 8. Vehicles where the body has been submerged in water exceeding half of its height, or where water has entered the passenger compartment.
14
3
Share

What are the classifications of windshield wipers?

Windshield wipers are divided into beam wipers and conventional wipers. Windshield wipers are important accessories installed on the windshield, and their function is to remove rain, snow, and dust that obstruct the view on the windshield glass. Windshield wipers play a crucial role in driving safety. Windshield wiper maintenance guide: 1. When using the wiper to remove dust from the windshield surface on a sunny day, be sure to spray windshield washer fluid and avoid dry wiping; 2. If there are other stubborn or hard contaminants on the glass, they should be cleaned manually; 3. When lifting the wiper blade during car washing or daily cleaning, hold the spine of the wiper and slowly return it, avoiding snapping the wiper blade back suddenly; 4. In winter, use an ice scraper to remove ice chips from the windshield surface first to avoid increasing the burden on the wiper.
4
2
Share

How to Renew a Driver's License in a Different Location?

Methods for renewing a driver's license in a different location: 1. Go to a photo studio with driver's license photography qualifications to take photos, obtaining a one-inch white background photo without a hat and a digital image collection system receipt; 2. Make a copy of your ID card and bring the original. If you are from another province, also bring your residence permit and a copy of it; 3. Go to the hospital designated by the vehicle management office for a physical examination, verify your ID, submit one photo, and obtain the motor vehicle driver's physical condition certificate to fill out and undergo the physical examination; 4. Go to the vehicle management office to get a number and queue up, receive a driver's license application form, and attach the photo; 5. When your number is called, submit the materials to the police at the vehicle management office, then wait a moment for the review; 6. After passing the review, you will receive a form to pay the fee. After paying, submit the form with the payment stamp back to the police.
17
0
Share

What does intermittent braking mean?

The meaning of intermittent braking is: first press the brake slightly, then release the brake (but not completely) when you feel the car decelerating significantly, and press the brake again when you feel the braking effect is about to disappear. Repeat this cycle. The applicable objects of intermittent braking: mostly used for large vehicles without ABS and with air brakes in the past, but the intermittent braking method will affect the smoothness and comfort of the vehicle. Small cars are lightweight, and if intermittent braking is not used for long downhill slopes, the wheel hubs will not overheat. It is not recommended to use intermittent braking for small cars to decelerate. The reason for using intermittent braking: because large vehicles are heavier, but air brakes respond faster than hydraulic brakes. To avoid locking the wheels and preventing the inability to steer, intermittent braking technique is adopted. The function of intermittent braking is: to prevent wheel lock-up, thereby controlling the vehicle from skidding.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.