What is the Toyota Land Cruiser?

What does the Buick LaCrosse dashboard's AFL maintenance light indicate?

Possible causes are as follows: 1. Inside the headlight: The headlight's internal steering mechanism is stuck or the drive motor is damaged. 2. Sensor: The AFL steering sensor is damaged. 3. Wiring: Loose or disconnected wiring interfaces. 4. Battery: The front headlight high-speed adjustment control module's front axle sensor signal circuit is short-circuited to the battery. Additional relevant information: 1. Reset: The AFL light cannot be manually reset by the owner; it requires inspection at a 4S shop. The light will naturally disappear after repairs. Based on owner feedback, this phenomenon often occurs in older vehicles that have been driven for several years. Sometimes, it's not an issue with other circuits or sensors; the AFL light may also appear as a precursor to the headlights failing. 2. Problem-solving approach: Based on the car's steering wheel angle, yaw rate, and driving speed, the headlights can be dynamically adjusted continuously to adapt to the current steering angle, ensuring the light direction aligns with the vehicle's current driving direction. This provides optimal illumination of the road ahead and maximizes visibility for the driver, significantly enhancing driving safety in the dark.

7

5

Share

How to Choose Between BYD Tang and Song New Energy Models?

Both models are part of BYD's lineup. The BYD Tang, with its sporty and fashionable exterior, is particularly favored by young couples for family use. The Song is essentially the dual-mode version of the BYD S3, showcasing a notably sporty design without significant differences. If you prefer a more dynamic driving style, the Tang is an excellent choice, while the Song suits those who favor a more composed style. Below are detailed introductions to the BYD Tang and Song: 1. Exterior Design: The BYD Tang features a completely new front design, incorporating large chrome accents, a black honeycomb grille, and a bold "big mouth" intake on the front bumper, giving the vehicle a sporty and stylish appearance. The Song's front fascia follows BYD's latest "Dragon Face" design philosophy, but as the latest upgraded version, it appears more refined and distinctly SUV-like. 2. Interior: The BYD Tang's dashboard is adorned with large wood-grain panels, enhancing its luxurious feel. Notably, it features a digital instrument cluster, adding a high-tech vibe. The Song's interior adopts BYD's newest generation family design, with a multi-layered floating console that is minimalist yet futuristic, exuding a strong sense of modernity. The center console area is finished with high-gloss piano black materials, elevating its sophistication. 3. Powertrain: The BYD Tang is equipped with a 2.0TI turbocharged engine, delivering a maximum power output of 371 kW and a peak torque of 720 Nm. The Song offers 1.5T and 2.0T engine options, producing up to 154 and 205 horsepower, respectively.

19

1

Share

How to Turn on the Mercedes-Benz E-Class Wiper?

The wiper switch of the Mercedes-Benz E-Class is located on the left rear side of the steering wheel. Setting it to AUTO activates the automatic rain-sensing system. Pressing it down once adjusts the speed, though AUTO is generally sufficient. The wiper switch is combined with the turn signal switch. Pressing inward from the outer part of the combo switch head activates the windshield washer. Precautions for using the wipers: 1. Maintain cleanliness: Dirty wiper blades can leave streaks on the windshield. Use a towel dampened with alcohol to wipe along the edge of the wiper blade to remove accumulated dirt, debris, and dead leaves. Clean the wiper blades monthly to keep them in good condition. 2. Check the rubber: If the windshield produces a screeching sound, the wiper blade rubber may have hardened, worn out, or cracked. If the wear is not severe, the owner can sand the uneven surfaces with sandpaper. 3. Avoid sun exposure: Park the car in a ventilated and shaded area whenever possible. Especially in hot weather, many people park their cars outdoors under direct sunlight. High temperatures are the nemesis of rubber materials, which accelerates the aging of wiper blades. 4. Refill fluid: Some owners prefer using plain water to refill, which may damage the glass and wipers. To prolong the lifespan of the components, always use proper windshield washer fluid. Ensure timely refilling during daily driving. 5. Remove frost: In cold northern regions with heavy snowfall, the car's wipers can easily freeze. In such cases, manually clear the frost from the glass surface. Forcibly activating the wipers can bend the mechanical structure, damage the wiper blades, scratch the glass, or even burn out the wiper motor in severe cases.

3

2

Share

What are the reasons for the high water temperature of the Baojun 730?

The high water temperature of the Baojun 730 can be caused by many reasons, mostly due to insufficient coolant, a faulty thermostat, water pipe leakage, or insufficient cooling water. Common causes include a broken fan belt, radiator or water pipe leakage, thermostat failure, and engine oil leakage. Below is a detailed introduction about the Baojun 730: 1. Dimensions: The length, width, and height of the Baojun 730 are 4780 mm, 1780 mm, and 1740 mm respectively, with a wheelbase of 2750 mm. The car offers a spacious interior, which has made it popular among consumers since its launch. The Baojun 730 is known for its high cost-performance ratio. 2. Engine: The Baojun 730 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. The 1.5-liter turbocharged engine delivers a maximum power of 108 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5200 rpm and the maximum torque between 2200 to 3400 rpm. This engine features DVVT technology and multi-point fuel injection, and it uses an aluminum cylinder head and cast iron cylinder block. It is paired with either a 6-speed manual transmission or a CVT. The 1.5-liter naturally aspirated engine produces a maximum power of 77 kW and a maximum torque of 135 Nm, with the maximum power achieved at 5600 rpm and the maximum torque between 3600 to 5200 rpm. This engine also features DVVT technology and multi-point fuel injection, and it uses an aluminum cylinder head and cast iron cylinder block. It is paired with a 6-speed manual transmission. 3. Suspension: The Baojun 730 uses a MacPherson independent suspension at the front and a torsion beam non-independent suspension at the rear. Most MPV models use a torsion beam suspension at the rear to maximize interior space.

17

3

Share

Can You Keep Driving When the Oil Light Comes On?

If the oil warning light comes on while driving, it is best not to continue driving. Instead, pull over to the side of the road and request assistance. The oil light indicates a potential issue that requires immediate inspection to resolve the flashing warning. Here are some reasons why the oil light might flash: 1. Overheating of the engine can cause the oil to become too thin, leading to insufficient oil pressure, which triggers the oil light to flash continuously. 2. Excessive engine temperature can thin the oil, causing it to leak excessively through gaps and resulting in a drop in oil pressure, which illuminates the oil warning light. 3. Insufficient oil levels reduce the oil pump's output or allow air to enter, lowering oil pressure and causing the oil light to flash. 4. Oil viscosity that is too high. Oil viscosity is closely related to oil quality—higher viscosity generally means better resistance to high temperatures. However, higher viscosity isn't always better; the oil should match the engine's specifications. 5. A clogged oil filter. When the oil filter is blocked, the bypass valve in its base opens, allowing oil to bypass the filter and enter the main oil passage directly. If the bypass valve's opening pressure is set too high or too low, the oil pump's pressure may fluctuate, triggering the warning light. 6. Improper clearance between the crankshaft and bearings (main or connecting rod). If the fit is too tight, oil pressure increases; if too loose, oil pressure decreases. 7. A damaged or malfunctioning pressure relief valve. If the main oil passage's relief valve spring weakens, is improperly adjusted, or if the valve seat and ball are worn or stuck open, oil return increases significantly, causing a drop in main oil passage pressure.

15

4

Share

What to Do If Your ID Card Expires During the Driving Test (Subject 3)?

If your ID card expires, you can use a temporary ID card as a substitute for the Subject 3 driving test. A temporary ID card holds the same legal validity as a formal ID card and can be used as a formal ID within its 3-month validity period. Therefore, there is no issue using a temporary ID card for the Subject 3 test. Materials required for ID card replacement: Original household registration booklet of the applicant. Completed 'Resident ID Card Application Form'. Applicant's 'Replacement Certificate'. ID photo receipt slip. Processing steps: Visit the local police station and request the household registration officer to issue a replacement certificate for the lost ID card. Bring your household registration booklet, replacement certificate, photo information (ID photo receipt slip), and the completed 'Resident ID Card Application Form' to the temporary ID card processing window. The window officer will review the application materials. If approved: Pay the applicable fees and receive a 'Certificate Collection Notice'. If rejected: The officer will explain the reasons. Collect your new ID card at the designated location by presenting the 'Certificate Collection Notice' on the specified date. Note: Residents who act as proxies for ID card collection must present their own ID cards. Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license examination. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The full score is 100, with a passing score of 90. A retake is allowed on the spot, and if the retake is failed, a new appointment can be made after 10 days. The road driving skills test in Subject 3 includes: vehicle preparation, light simulation test, starting, driving straight, gear shifting, lane changing, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, overtaking, making U-turns, and night driving.

2

5

Share

What is the Toyota Land Cruiser?

What does the Buick LaCrosse dashboard's AFL maintenance light indicate?

How to Choose Between BYD Tang and Song New Energy Models?

How to Turn on the Mercedes-Benz E-Class Wiper?

What are the reasons for the high water temperature of the Baojun 730?

Can You Keep Driving When the Oil Light Comes On?

What to Do If Your ID Card Expires During the Driving Test (Subject 3)?

Should the Lynk & Co 05 Use 92 or 95 Octane Gasoline?

Does an engine with replaced connecting rods perform the same as normal?

What are the reasons for the Peugeot 307 air conditioning not cooling?

What Causes the Front Shock Absorber to Make a Bumpy Clunking Noise?