What is the Toyota Alphard V6?

1 Answers
AustinLee
07/29/25 6:36pm
The Toyota Alphard V6 is an MPV model and a luxury vehicle in its class. It is equipped with two engines: a 2.4L inline-four engine (2AZ-FE) with a maximum power of 123 kW and maximum torque of 227 Nm, and a 3.5L V6 engine (2GR-FE) with a maximum power of 202 kW and maximum torque of 340 Nm. The Toyota Alphard V6 has a body length of 4975 mm, width of 1850 mm, height of 1945 mm, a wheelbase of 3000 mm, and a minimum ground clearance of 170 mm.
Was this review help?
20
5
Share
More Forum Discussions

What is the symbol for China V emission standards?

The symbol for China V emission standards is 'V', which belongs to the National Fifth Stage Emission Standards for motor vehicle pollutants. China V imposes stricter limits on nitrogen oxides (NOx), hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM) emitted by motor vehicles. The purpose is to reduce and prevent environmental pollution caused by vehicle exhaust, protect the ecological environment, and ensure human health. The requirements of China V are: 1. The CO emissions per kilometer driven by a vehicle must not exceed 1000 mg; 2. The non-methane hydrocarbon emissions per kilometer driven must not exceed 68 mg; 3. The NOx emissions per kilometer driven must not exceed 60 mg; 4. The fine particulate matter emissions per kilometer driven must not exceed 4.5 mg.
9
2
Share

Where is Subaru's manufacturing location?

Subaru's manufacturing location is in Gunma Prefecture, Japan. Its models include: Legacy, Forester, Outback, Tribeca, Impreza, etc. Taking the Subaru Forester as an example, it belongs to a compact 5-door 5-seat SUV, with body dimensions of: length 4640mm, width 1815mm, height 1730mm, wheelbase of 2670mm, and a fuel tank capacity of 63L. The Subaru Forester is equipped with a 2.0L naturally aspirated engine, with a maximum power of 113 kilowatts, maximum power speed of 5800 to 6000 revolutions per minute, maximum torque of 196 Newton-meters, maximum torque speed of 4000 revolutions per minute. Its front suspension uses a MacPherson independent suspension, and the rear suspension uses a double-wishbone independent suspension.
20
0
Share

What lights should be turned on when driving into a tunnel?

When driving into a tunnel, you should turn on the position lights or low beam headlights. There are several important points to note when driving through a tunnel: 1. Before entering, pay attention to traffic signs or information boards, especially speed limit signs. When driving from an open road into a tunnel, the human eye takes about seven to eight seconds to adapt to the darkness, during which the driver's vision is impaired, so it is necessary to reduce speed. 2. When passing through a single-lane tunnel, always observe whether there are oncoming vehicles, turn on both front and rear lights, and generally avoid honking. 3. When passing through a double-lane tunnel, drive at normal speed on the right side of the road, do not change lanes inside the tunnel, and absolutely avoid overtaking.
8
0
Share

Where are Great Wall's engines produced?

Great Wall's engines are produced at the Baoding factory. An engine is a machine that can convert one form of energy into another. The brands under Great Wall include: Haval, Great Wall, WEY, Ora, Coolray, etc. Taking the 2021 Haval H6 automatic two-wheel drive MAX as an example, it is a compact 5-door 5-seat SUV with body dimensions of: length 4653mm, width 1886mm, height 1730mm, and a wheelbase of 2738mm. The 2021 Haval H6 automatic two-wheel drive MAX is equipped with a 2.0T turbocharged engine, with a maximum power of 155 kW and a maximum torque of 325 N·m. It adopts a front-wheel drive system, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension.
19
0
Share

How to Use D1, D2, and D3 Gears?

Automatic transmission's D1, D2, and D3 refer to the low-gear modes of the transmission. D1 manually locks the car's gear in first gear, overriding the car's automatic control. D2 manually locks the gear in second gear, not exceeding second gear, allowing the car to switch automatically between first and second gears. D3 locks the gear in third gear, allowing the car to switch automatically between first, second, and third gears but not exceeding third gear. The scenarios for using D1, D2, and D3 are as follows: 1. Usage of D1 and D2: D1 and D2 can be used when going uphill, especially on steep slopes. Manually setting the gear to first or second gear, similar to using a manual transmission on a steep hill, allows for greater torque at low gears, making it easier to climb. However, this isn't the primary reason, as the D gear can also achieve this. Locking the gear prevents frequent shifting in D gear. The biggest advantage of D1 and D2 is their application when going downhill. In D gear, even without pressing the accelerator, the car will speed up uncontrollably, which can be dangerous. However, when shifted to D2, the car descends slowly due to the resistance from the transmission and engine, improving safety and control. Some cars even promote a hill descent control feature, which achieves the same effect with a simple button press. 2. Usage of D3: The benefit of D3 is faster response when overtaking. At a speed of 80 km/h, the gear is usually in 5th or 6th. To overtake quickly, the automatic transmission would gradually downshift from 6th to 5th to 4th to 3rd, which takes time. By directly shifting to D3, the gear changes to 3rd immediately, providing the fastest response for instant acceleration. After overtaking, simply shift back to D gear.
14
4
Share

How to reset the tire pressure monitoring system on an Audi A3?

The method to reset the tire pressure monitoring system on an Audi A3 is as follows: 1. Turn on the vehicle's central control screen; 2. Click on the vehicle options; 3. Select system maintenance; 4. Locate the tire pressure monitoring system on the smart screen and reset it. Taking the 2021 Audi A3 as an example, its body dimensions are: length 4351mm, width 1815mm, height 1458mm, wheelbase 2630mm, and fuel tank capacity 51 liters. The 2021 Audi A3 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.