What is the total weight of the Nissan Teana?

How to Reverse into the Garage in Subject 2?

Here is the relevant introduction on how to reverse into the garage in Subject 2: 1. Keep an eye on the rearview mirrors: When reversing into the garage in Subject 2, always keep an eye on the left and right rearview mirrors. If you notice one side is wider, slightly turn the steering wheel in that direction to prevent the other side from crossing the line. Also, when initially determining the timing to fully turn the steering wheel, make sure to turn it decisively without hesitation. 2. Maintain distance: During the process of fully turning the steering wheel and reversing, the rear of the car gradually enters the garage. Just before entering, the wheels should maintain a distance of 30cm from the garage corner. Students should constantly observe through the rearview mirrors and make corrections if the distance is less than or greater than 30cm, otherwise, the line will definitely be crossed after entering the garage.

15

2

Share

How to Drive Through Flooded Roads?

When entering the water, maintain a slow and steady speed, and avoid stopping while in the water. Below are detailed instructions for driving through flooded roads: 1. When crossing shallow water areas: Do not ease off the throttle, keep the speed low to prevent water from rushing into the front. If the water is not too deep, simply use a lower gear with slightly higher throttle to pass through. 2. Driving during heavy rain: Of course, during heavy rain, if the windshield wipers cannot provide sufficient visibility, it is generally advisable to choose a relatively safe spot to park, turn on the width indicator lights, and wait until the rain eases before continuing. The most important thing is to determine the depth of the water; typically, the water level should not exceed two-thirds of the tire height.

16

4

Share

When was the 2019 RAV4 model launched?

The 2019 RAV4 model was officially launched and made available for sale on October 25, 2019. In fact, the RAV4 had been on the market abroad for some time before that. However, it had received little exposure in the domestic market. Currently, the RAV4 offers two models: the front-wheel-drive Pioneer and Limited Edition. Here is some relevant information about the 2019 RAV4: 1. Exterior: The 2019 RAV4 continues to adopt Toyota's classic design, featuring a bold SUV look with a rugged style, a large grille, and flat headlights, giving the vehicle a more youthful appearance and enhancing its off-road feel. 2. Interior and configuration: The RAV4 has shifted from its previous style to a black and beige color scheme, highlighting a warm and stable atmosphere. The T-shaped center console is designed for easy driver operation. The steering wheel, with its three-spoke sporty design, is particularly appealing to younger drivers, exuding a dynamic vibe.

19

2

Share

How to distinguish between China V and China VI for A4L?

The differences between China V and China VI emission standards are as follows: Different emission standards: China VI emission standards are more than 30% stricter than China V. Excluding the influence of working conditions and testing, the carbon monoxide emissions of gasoline vehicles are reduced by 50%, the total hydrocarbon and non-methane hydrocarbon emissions are reduced by 50%, and nitrogen oxide emissions are reduced by 42%. Different implementation times: The China V standard has been implemented nationwide since January 1, 2017. China VI has been implemented since July 1, 2019. Different principles: During the China V phase, the emission standards for diesel vehicles and gasoline vehicles were different. However, China VI adopts a fuel-neutral principle, meaning that regardless of the fuel used, the emission limits are the same. Different issuing departments: The China V standard was issued by the Ministry of Environmental Protection. The China VI standard was issued by the Ministry of Environmental Protection and the General Administration of Quality Supervision, Inspection, and Quarantine. Different letter representations: China V is represented by 'V'; China VI is represented by 'VI'. Different monitoring requirements for plug-in hybrid electric vehicles: Compared to China V, China VI has improved monitoring requirements for plug-in hybrid electric vehicles, including energy storage systems, thermal management systems, brake regeneration, drive motors, generators, and other regulations. China V standard limits are as follows: Gasoline vehicles must not emit more than 1,000 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven. China VI has two standards: China VIa and China VIb. The details are as follows: China VIa standard limits: Gasoline vehicles must not emit more than 700 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 68 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 60 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 4.5 milligrams of PM fine particles per kilometer driven. China VIb standard limits: Gasoline vehicles must not emit more than 500 milligrams of carbon monoxide per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of non-methane hydrocarbons per kilometer driven. Gasoline vehicles must not emit more than 35 milligrams of nitrogen oxides per kilometer driven. Gasoline vehicles must not emit more than 3 milligrams of PM fine particles per kilometer driven. Affected by the China VI emission policy, although China V vehicles are not currently restricted from normal use, such as travel or license plate restrictions, the resale value of the vehicles will be significantly impacted. For car owners, if they purchase a truck on loan for cargo transport, after repaying the loan, the depreciation of the vehicle is equivalent to the net profit earned by the owner during that period. A higher residual value means more profit for the owner. Therefore, from this perspective, China VI vehicles, which have a longer service life and more road rights, are more advantageous.

19

2

Share

What are the characteristics of timing gear noise?

The characteristics of timing gear noise include excessive clearance, poor gear engagement, or gear surface peeling and roughness. Below is relevant information about timing gear noise: 1. Excessive clearance: Excessive clearance in timing gear engagement will produce a non-rhythmic grinding sound. 2. Poor gear engagement: Timing gear noise is a "clicking" sound caused by poor gear engagement or gear surface peeling and roughness; when the timing gear engagement clearance is too large, a slight "clicking" sound will be emitted during engine idle operation. 3. Loose screws: Loose timing gear fixing screws or failure of the camshaft axial limit device will cause axial movement noise of the timing camshaft.

11

2

Share

What to Pay Attention to When Picking Up and Inspecting a New Car?

When picking up and inspecting a new car at a 4S dealership, it is important to focus on two main aspects: vehicle inspection and document verification. Below are the key points to consider during the pickup and inspection process: 1. Engine Inspection: After a cold start, let the engine warm up for about 2 minutes. The engine sound should be smooth without any strange noises. Take a short test drive to ensure smooth gear shifting without unusual sounds, no abnormal noises from the body, and proper functioning of electronic devices like the air conditioning and audio system. 2. Body Inspection: The paintwork of a new car is applied by automated computer systems and should be flawless. If there are any inconsistencies in paint protection or color discrepancies, insist on the 4S dealership replacing the vehicle. The interior should be free of any defects. After turning on the power, check all functions to ensure they work properly, such as the navigation system, windshield wipers, headlights, etc. Test all buttons for smooth operation and verify that the headlights can be turned on normally.

18

1

Share

What is the total weight of the Nissan Teana?

How to Reverse into the Garage in Subject 2?

How to Drive Through Flooded Roads?

When was the 2019 RAV4 model launched?

How to distinguish between China V and China VI for A4L?

What are the characteristics of timing gear noise?

What to Pay Attention to When Picking Up and Inspecting a New Car?

Does enabling hidden car features affect the vehicle?

What is the passing score for C1 driving test subject 2?

What Causes Insufficient Power in a Turbocharged Engine?

Why Does a Car's Engine Sound Louder in Winter?