What is the total motor power of the BYD Song New Energy?

1 Answers
SanChristian
07/29/25 9:48pm
The total motor power of the BYD Song New Energy is 220 kW, with a total torque of 500 Nm. The front motor of the BYD Song New Energy has a maximum power of 110 kW and a maximum torque of 250 Nm, while the rear motor also has a maximum power of 110 kW and a maximum torque of 250 Nm. The BYD Song New Energy is equipped with a 1.5-liter turbocharged engine that features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The BYD Song New Energy is the dual-mode version of the BYD S3, positioned as a compact SUV. It features an X-shaped front grille, giving it a sporty appearance. The vehicle adopts hidden A, B, and C pillar designs, creating a floating roof visual effect. In terms of dimensions, the BYD Song New Energy measures 4565 mm in length, 1830 mm in width, and 1703 mm in height, with a wheelbase of 2660 mm.
Was this review help?
20
3
Share
More Forum Discussions

Is it safe to continue driving if the car is smoking with a burning smell?

It is strongly advised not to continue driving if the engine is smoking with a burning smell. This situation is primarily caused by overheating of the engine, radiator malfunction, oil leakage, or friction of the clutch plates in the vehicle's transmission. Oil leakage can also lead to engine smoking with a burning smell due to high-temperature evaporation, requiring a comprehensive inspection. Below are additional details: Engine overheating After prolonged high-intensity use, the engine temperature can rise sharply, resulting in significant white smoke accompanied by a burning odor. In such cases, the engine should be cooled down and only used again after its temperature returns to normal levels.
15
3
Share

How to Adjust Car Alignment?

Adjusting the wheel alignment is the most direct method to correct car misalignment. The steps to adjust car misalignment are as follows: 1. Adjust the steering tie rod, which is a crucial component in the car's steering mechanism. It directly affects the vehicle's handling stability, operational safety, and tire lifespan. If the steering tie rod is uneven—one side longer than the other—it will cause the car to pull toward the longer side. 2. Prepare a wrench, then turn the steering wheel fully to the right to expose the rear of the left front wheel. Loosen the fastening nut with the wrench, then rotate the left tie rod clockwise. 'Screwing in' the left tie rod shortens it.
11
3
Share

What does EPB failure mean?

EPB stands for Electrical-Park-Brake in English, which is the electronic parking brake system. EPB failure means there is a malfunction in the electronic handbrake. Here are some extended details: Function of EPB: EPB controls the parking brake through electronic circuits, with the same function as a mechanical lever handbrake. When starting the car, there is no need to manually turn off the electronic handbrake; it will automatically deactivate when you press the accelerator. Causes of failure: An electronic handbrake failure could be due to malfunctions in components such as the wheel speed sensor, throttle position sensor, handbrake switch, wheel speed sensor, motor, etc. Any abnormal component could trigger the EPB warning light to illuminate.
19
0
Share

What is the name of the car paint with highlights?

The car paint with highlights is called metallic paint, which is composed of countless opaque gray aluminum flakes. Composition of car paint: The car paint surface consists of four layers, from the inside to the outside: the electrophoretic layer, the intermediate coat, the color coat, and the clear coat. After the entire body is assembled, it is immersed in an electrophoretic bath, forming an electrophoretic layer on the surface. Electrophoretic layer of car paint: The main function of the electrophoretic layer is rust prevention. After the electrophoretic layer is formed on the body surface, robots spray the intermediate coat, whose main function is also rust prevention and improving adhesion to the next layer of paint.
6
1
Share

Is it allowed to overtake on elevated roads?

Overtaking is allowed on elevated roads. Master the timing of overtaking: Timing is crucial when overtaking, especially on urban roads with heavy traffic. It's safer to choose moments when there are fewer vehicles ahead and behind, and when road conditions are favorable. Remember to use turn signals: First, activate the left turn signal to alert vehicles behind of your intention to overtake. After overtaking, quickly switch to the right turn signal to return to the normal lane. Utilize high beams and hazard lights effectively: During the overtaking process, you can use high beams and hazard lights in combination to alert the vehicle ahead that you are overtaking, while also reminding oncoming vehicles to be cautious.
9
2
Share

Where is the fender located on a car?

The fender is a panel structure installed behind the outer frame of the wheel, typically made of high-quality rubber. Before installing the fender: Clean the area where the fender will be installed with a damp cloth, and prepare the fender along with all necessary tools for installation. Installing the fender: Remove the screw caps from the pre-drilled holes on the car where the fender will be mounted. Position the fender correctly and insert the screws into the holes one by one. Once all screws are tightened into their respective holes, the fender installation is complete. The front fender can be adjusted around the car wheel, making installation more convenient without having to remove the wheel.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.