What is the torque specification for sedan wheel bolts?

1 Answers
SanEmiliano
07/30/25 1:20am
The torque for sedan wheel bolts is generally around 100-120 Newton meters. Here is some relevant knowledge about tires: Functions of tires: Automobile tires are one of the important components of a vehicle. They directly contact the road surface and work together with the suspension system to absorb shocks during driving, ensuring good ride comfort and smooth operation. They maintain excellent adhesion between wheels and road surfaces, improve traction, braking, and off-road capability, and bear the vehicle's weight. The crucial role tires play in automobiles is receiving increasing attention. Classification of tires: Full-size spare tire: A full-size spare has exactly the same specifications as the other four tires on the vehicle and can replace any temporarily or permanently unusable tire. Compact spare tire (donut): This type of spare has slightly smaller diameter and width than the regular tires, serving only as a temporary replacement. It should only be used on non-driven wheels with a maximum speed limit of 80km/h.
Was this review help?
1
5
Share
More Forum Discussions

What colors are available for the Changan CS15?

Changan CS15 comes in the following colors: Snowfield White, Flashy Orange-Yellow, Flash Pearl Black, Vibrant Red, and Flash Deep Sea Blue. Taking the 2021 Changan CS15 as an example, its body dimensions are: length 4135mm, width 1740mm, height 1630mm, wheelbase 2520mm, minimum ground clearance 150mm, and curb weight 1210kg. The 2021 Changan CS15 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 107PS, maximum torque of 145Nm, and maximum power of 78.5kW, paired with a 5-speed manual transmission.
4
3
Share

What is the Optimal Economical RPM for Diesel Engines?

Diesel engines typically have an economical RPM range of: 1500-2000r/min. Below are relevant details about diesel engine RPM:1. Maximum No-Load RPM: This refers to the highest RPM a diesel engine can achieve at full throttle without any load. It's generally 5%-10% higher than the rated RPM. The engine should not operate at this speed for more than 1-2 minutes.2. RPM Varies by Application: The operating RPM of diesel engines differs according to their specific applications, even for engines of the same model. Automotive diesel engines have the highest RPM, usually operating at the rated (or specified) RPM - which is the maximum RPM at which the engine can run under full load.
9
3
Share

How many cans of refrigerant are needed when replacing the compressor on a Baojun 730?

When replacing the compressor on a Baojun 730, approximately 4 to 5 cans of refrigerant are required. High-pressure side liquid refrigerant charging: This method is suitable for charging after leak detection and vacuuming. Note that the compressor must not be turned on during this process, the engine should be off, and the refrigerant can must be inverted. Low-pressure side charging: This involves charging with gas, which is characterized by a slower filling speed and is typically used for refrigerant replenishment. Automotive refrigerant, commonly referred to as Freon, is the substance used in car air conditioning systems. It continuously circulates within the refrigeration system and achieves cooling through changes in its own state.
1
1
Share

What is the wading depth standard for electric vehicles?

Electric vehicles have a wading depth standard that should not exceed 30 centimeters. Below are specific details about vehicle wading standards: 1. Vehicle Type: Different vehicle types have varying wading depth standards. Sedans have a wading depth of 20-30 centimeters, SUVs 30-60 centimeters, and hardcore off-road vehicles can reach 70-100 centimeters. 2. Issues After Wading: Deformation and damage to the crankshaft connecting rod mechanism. When a mixture of water and air enters the engine through the intake, since gases are compressible but liquids are not, the connecting rod may deform under the influence of water. If the driver attempts to start the vehicle at this point, the immense reactive force can cause the bent connecting rod to rub against the cylinder block, resulting in irreversible damage to the cylinder block.
2
2
Share

What engine is used in the BAIC Zhida X3?

BAIC Zhida X3 is equipped with a 1.5L naturally aspirated engine and a 1.5T turbocharged engine, which are the A151E engines jointly developed by Mercedes-Benz, Mitsubishi, and BAIC. The 1.5L engine has a maximum power of 85 kW and a peak torque of 146 Nm, meeting the National V emission standard. The 1.5T engine delivers a maximum power of 110 kW and a peak torque of 210 Nm, complying with the National VI emission standard. The BAIC Zhida X3 is the third model of BAIC's 2.0 AI era. In terms of body dimensions, the BAIC Zhida X3 measures 4325mm in length, 1830mm in width, and 1640mm in height.
13
4
Share

What are the reasons for car lights not working?

The reasons for car lights not working are: 1. The car light bulb is burnt out; 2. Poor contact in the car light wiring; 3. Damage to the car light relay or combination switch; 4. Open circuit, short circuit, or break in the car light power line; 5. Damage to the car light fuse. The types of car lights include: headlights, fog lights, brake lights, daytime running lights, and hazard warning lights. Precautions for using car lights are: 1. Turn on the low beam when driving at night; 2. Do not use the high beam when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, alternate between high and low beams to signal.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.