What is the top speed of the tenth-generation Accord?

What Causes a Burning Smell from the Car AC After Starting the Engine?

The reasons for a burning smell from the car AC after starting the engine are: 1. The air intake of the AC is blocked, preventing the hot air inside from being blown out and causing the heat to accumulate, which burns the plastic components; 2. Aging wiring, where the circuit gets scorched by heat during electric heating, or plastic components shifting internally, leading to overheating. Maintenance methods for car AC: 1. Regularly check the refrigerant and compressor oil; 2. Clean the surface of the condenser; 3. Clean the surface of the evaporator. The functions of car AC are: 1. To adjust and control the temperature, humidity, air cleanliness, and airflow inside the car cabin to an optimal state, providing a comfortable environment for passengers and reducing travel fatigue; 2. To create favorable working conditions for the driver, serving as a crucial ventilation device for ensuring safe driving.

5

3

Share

Can private cars drive on the highway at night?

Private cars can drive on the highway at night. The precautions for driving on the highway are: 1. Both the driver and front passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid sudden steering wheel movements while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. Only use adjacent lanes when overtaking, and immediately return to the driving lane after overtaking. Vehicles must not straddle or drive on the lane dividing line; 5. Do not reverse, drive in the opposite direction, or make U-turns or turns by crossing the central divider. Test driving and driving instructional vehicles are not allowed, and overtaking or parking on ramps is prohibited; 6. Maintain a following distance of at least 100 meters. When the speed is below 100 kilometers per hour, the distance from the vehicle ahead in the same lane can be appropriately reduced, but the minimum distance should not be less than 50 meters.

14

1

Share

Where is the air conditioning relay of Wuling Sunshine located?

The air conditioning relay of Wuling Sunshine is located in the vehicle's wiring control box, which is positioned under the steering wheel. You can see it by opening the decorative cover. The air conditioning relay is a multifunctional monitoring and protection device for three-phase three-wire power systems or three-phase electrical equipment. It provides alarm output and protective circuit action output through relay output, offering contact control signals for alarm and protection purposes. Taking the 2020 Wuling Sunshine as an example, it belongs to the micro van category with body dimensions of 3797mm in length, 1510mm in width, and 1820mm in height, a wheelbase of 2500mm, a fuel tank capacity of 38 liters, and a curb weight of 997kg. The 2020 Wuling Sunshine is equipped with a 1.2L naturally aspirated engine, delivering a maximum horsepower of 76PS, a maximum power of 56kW, a maximum torque of 108Nm, and is paired with a 5-speed manual transmission.

20

5

Share

Where to Place a Phone Holder Without Penalty?

Placing a phone holder on the dashboard or center console will not result in penalties and is also safer, as it does not obstruct the driver's view. Below is more information about phone holders: Suction Cup Car Mount: This type of holder uses suction to attach to various surfaces inside the car, such as the windshield or dashboard, allowing for a more direct view of the phone. However, on rough roads, suction cup mounts may detach, and their larger size can obstruct the driver's view, especially when attached to the windshield. Clip-on Car Mount: Clip-on holders attach to the air vents. Compared to suction cup mounts, they are more compact and do not block the driver's view. They are also more affordable. However, their lower placement (on air vents) makes them less convenient to view and can divert attention, posing potential safety risks. Magnetic Car Mount: As the name suggests, magnetic holders use magnets for secure attachment, making them less likely to fall off—provided they are of good quality. Their small size allows them to be placed almost anywhere in the car, making them a popular choice. However, they require 3M adhesive for installation, which can leave difficult-to-remove marks. Additionally, a metal plate must be attached to the back of the phone, which may affect its appearance.

1

0

Share

What does Engine MAX mean?

"MAX" means "maximum." When the MAX button is illuminated on a car's air conditioning system, it represents the strongest cooling mode. For example, after turning on the A/C (air conditioning) switch and then pressing MAX, the air conditioning will activate the strongest cooling mode with the blower operating at maximum airflow. Its purpose is to lower the temperature inside the car as quickly as possible. Here are some related details: Label: The term "max" can be seen not only on air conditioning control buttons but also on various fluid reservoirs in the engine compartment. Here, "max" also carries the meaning of "maximum" or "highest," and some may simply use "M" to denote it. Upper Limit: The "max" marking on fluid reservoirs indicates the upper limit of the fluid level. The highest position of the fluid level should not exceed the horizontal line corresponding to "max." Naturally, where there is an upper limit, there is also a lower limit. "Low" (or sometimes "min" in some cars) represents the lower limit, indicating the minimum fluid level position. This means the fluid level should not fall below the horizontal line corresponding to "low." These markings are most noticeable on the overflow tank (i.e., the radiator). The optimal fluid level is between the upper and lower limits.

13

3

Share

What's the situation when the car's brakes are too hard to stop the vehicle?

Reasons for hard-to-press brakes: Braking before engine shutdown: The vehicle's braking system operates at maximum efficiency when the engine is running, with the brake booster being the key component that amplifies the force applied to the pedal. When the engine is off, the brake booster ceases to function, typically depleting its residual vacuum force after about three pedal presses. Thus, the sensation of hard brakes is essentially due to the lack of assistance from the brake booster. Solution: In this scenario, simply restart the engine and firmly press the brake pedal again. Once the engine is running, the brake booster will resume operation, and the brake pedal will return to normal. Brake booster malfunction: If the car's brake booster is leaking or malfunctioning, and you haven't pressed the brake pedal after turning off the engine, or you notice the brake pedal is unusually hard to press while driving, it's likely due to a faulty brake booster, possibly from a leaking or clogged vacuum tube. Solution: If this issue is detected before driving, it's safest to avoid driving and have the vehicle inspected at a repair shop immediately. If the problem arises while driving, remain calm, prioritize slowing down to a stop, and attempt multiple pedal presses to see if braking can be restored. Applying strong pressure often helps engage the braking force.

1

4

Share

What is the top speed of the tenth-generation Accord?

What Causes a Burning Smell from the Car AC After Starting the Engine?

Can private cars drive on the highway at night?

Where is the air conditioning relay of Wuling Sunshine located?

Where to Place a Phone Holder Without Penalty?

What does Engine MAX mean?

What's the situation when the car's brakes are too hard to stop the vehicle?

Does the Sylphy have front and rear crash beams?

How to Connect a Honda Dash Cam?

How Many Pounds Can the Trunk Hold?

Do all four tires need to be replaced at 60,000 kilometers?