What is the top speed of the Sai 600?

What does PDI inspection mean?

PDI inspection is a pre-sale inspection certification, which is a mandatory check that new vehicles must pass before delivery. New cars travel thousands of kilometers from the factory to the dealership and are stored for long periods. To ensure the safety and original performance of the new car for customers, PDI inspection is essential. PDI inspection items include: 1. Body inspection: mainly checking whether the body panels have paint peeling or dents; 2. Interior inspection: checking for damage or aging issues in interior panels, seats, and dashboard areas; 3. Engine compartment inspection: starting the engine to check if it runs smoothly and normally; 4. Chassis inspection: lifting the vehicle to inspect for any scratches on the chassis.

15

2

Share

What does it mean to keep the engine running while parked?

Keeping the engine running while parked means stopping the car and leaving the engine in an idle state. Generally, this is only necessary when the engine is overheating, as it allows the coolant to continue circulating and dissipating heat. Another situation is when the battery is low on charge, requiring the engine to idle for a period to recharge. The idle performance of the engine has a significant impact on emissions, fuel consumption, and comfort, making it an important indicator for evaluating engine performance. During idle, the engine is disconnected from the transmission system, and the throttle pedal is fully released. The engine only overcomes its own resistance to operate without any external power output.

5

4

Share

How to use the remote start function on the 14th-generation Sylphy?

14th-generation Sylphy remote start usage method: 1. Point the smart key at the vehicle; 2. Press the "LOCK" button to lock all doors; 3. Within 2 seconds, press and hold the remote engine start button until the signal light flashes and the taillights illuminate. The Sylphy is equipped with an HR16 1.6L naturally aspirated engine, delivering maximum power of 91kw and peak torque of 155nm. The vehicle remote start function has some limitations on the vehicle itself, with a key point being that it can only be installed on automatic transmission models. This is because automatic transmissions come with a TCU control unit, which communicates gear position information to the ECU engine control unit. The engine will only start when the onboard computer confirms the gear is in the P (Park) position.

5

3

Share

What is the function of the P button on an electric vehicle?

The P button on an electric vehicle is the parking function button, designed to prevent unintended movement. It effectively prevents the driver or others from accidentally twisting the throttle, which could lead to a runaway vehicle accident. The P button's anti-movement design provides multiple layers of protection for electric vehicle operation. After starting the vehicle, you must press the P button once to enable movement. Methods to deactivate the P button function are: 1. Press the P button once to deactivate; 2. Hold down the P button without releasing, then twist the throttle to deactivate. Electric vehicles use batteries as their energy source, converting electrical energy into mechanical motion through components such as the controller and motor, with speed adjusted by controlling the current.

6

5

Share

What to Do When the Yellow Triangle Exclamation Warning Light Comes On?

The method to deal with the yellow triangle exclamation warning light is: first turn off the engine, wait for a while, and then restart the engine to try again. This warning light is a general fault indicator, which may be caused by reasons such as overheating of the dry dual-clutch transmission clutch, intervention or failure of the fuel cut-off system, parking sensor failure, exterior light bulb failure, engine oil pressure sensor failure, traction control system warning or failure, etc. There are many types of warning or indicator lights with an exclamation mark on the dashboard, and the 8 common ones are: handbrake warning light, brake system fault warning light, steering system fault warning light, abnormal tire pressure warning light, lighting fault warning light, transmission fault warning light, wiper fault warning light, and general fault indicator light.

4

2

Share

How to Maintain a Car Spare Tire?

Methods for maintaining a car spare tire: Regularly inspect the spare tire, check tire pressure, and look for any wear or cracks. Additional information about car spare tires is as follows: 1. A spare tire refers to the backup tire for a car, and its specifications are usually the same as the original car tire. 2. Spare tires are categorized into full-size spare tires, non-full-size spare tires, and run-flat tires. 3. Car owners should regularly inspect the spare tire. Generally, tires have an aging period of about 4 years, so the spare tire should be replaced after approximately 4 years. After replacing the spare tire, it should not be used for an extended period because the spare tire is slightly smaller in size than the regular tire, and prolonged use can affect the vehicle's braking system, steering system, and suspension system.

8

0

Share

What is the top speed of the Sai 600?

What does PDI inspection mean?

What does it mean to keep the engine running while parked?

How to use the remote start function on the 14th-generation Sylphy?

What is the function of the P button on an electric vehicle?

What to Do When the Yellow Triangle Exclamation Warning Light Comes On?

How to Maintain a Car Spare Tire?

What causes the ticking sound inside the Magotan's timing cover?

How to Use the Remote Start Feature on the Sylphy?

Why can't CarPlay find available vehicles?

Where is the A-pillar of a sedan located?