···
Log in / Register

What is the top speed of the Piaggio X7?

4 Answers
LaSawyer
07/29/25 8:50pm

The top speed of the Piaggio X7 is 136 km/h. The top speed refers to the maximum driving speed that a vehicle can achieve on a well-paved road, which is the speed at which the driving resistance and driving force are balanced under windless conditions on a flat surface. The Piaggio X7 is a model under Zongshen Motor, equipped with a single-cylinder, water-cooled, four-stroke, four-valve engine with a displacement of 244 ml, a maximum power of 21 kW, and a maximum torque of 15.6 Nm. It has a fuel tank capacity of 12.1 liters. The dimensions of the Piaggio X7 are 2060 mm in length, 745 mm in width, and 1325 mm in height, with a wheelbase of 1480 mm, a seat height of 760 mm, and a curb weight of 182 kg. The front tire specification is 120/70-14, and the rear tire specification is 140/60-13.

Was this review help?
12
0
Share
PaigeRose
08/14/25 6:26pm

To be honest, when I recently rode the Piaggio X7 125cc model, I managed to hit a top speed of around 90 km/h on flat roads. With a downhill slope or a bit of tailwind, it might push a few kilometers more. As a young rider, I love the acceleration's kickback and the sense of freedom, but going too fast in the city is risky—too many traffic lights and heavy traffic make 80 km/h thrilling enough. I recommend testing speed on open highways, wearing a full-face helmet and knee guards for safety. Don’t just chase speed; remember to regularly check tire pressure and chain lubrication. Excessive wear affects stability and acceleration, but simple maintenance keeps the ride smooth and enjoyable.

Was this review help?
20
3
Share
Expand All
DeLila
10/16/25 6:53am

From my years of riding experience, the Piaggio X7 125cc version typically reaches a top speed of around 90 km/h, which is quite practical and perfectly suitable for daily commuting and short trips. As a more conservative rider, I advise against constantly pushing for maximum speed; maintaining 70-80 km/h is safer and more fuel-efficient, especially on rainy or windy days when the bike tends to feel less stable. Here’s a tip: regular engine oil changes and air filter cleaning help maintain consistent performance. Riding too fast leads to harsh wind noise that even a helmet can’t fully block. Safety should always come first—adhering to speed limits and wearing proper protective gear is what makes for a true riding experience.

Was this review help?
7
1
Share
Expand All
SanAnna
11/29/25 7:41am

Discussing the top speed of the Piaggio X7, the 125cc model can reach around 90 km/h, influenced by factors such as engine tuning and weight load. I experienced it during a straight-road test, but avoid prolonged high-speed cruising as it increases fuel consumption and wears parts; maintaining under 80km/h is recommended for better durability. Maintenance is key: regularly check brakes and tire wear, tighten the chain if loose—simple DIY can enhance safety. Speed isn't the goal; arriving home safely is what truly matters.

Was this review help?
17
3
Share
Expand All
More Forum Discussions

What is the fuel consumption of the CX-4?

The official fuel consumption of the Mazda CX-4, as per the Ministry of Industry and Information Technology, ranges between 6.3-7.3L/100km depending on the model. Below is relevant information: 1. Interior: The interior is full of a technological feel, with the cannon-style instrument panel being one of the most popular designs on the market today, offering clear and easy-to-read displays. The steering wheel, made of Italian imported top-grain leather, provides a comfortable and refined touch. 2. Introduction: The Mazda CX-4 is a compact coupe SUV under the Mazda brand. The instrument panel features black pillar buttons, or the large button on the left side of the multifunction steering wheel can be used to view the total mileage, single-trip mileage, instantaneous fuel consumption, and average fuel consumption.
8
1
Share

What are the gray spots on a white car?

White cars have gray spots on the paint surface, which are dust particles attached after acid rain corrosion. These can be easily removed using a clay bar. Methods to remove spots on white car bodies: Spray automotive cleaner onto the spotted areas on the white car body; then let it sit for two minutes to allow the cleaner to fully react with the spots; carefully wipe the spots with a cloth. If the entire car is covered with large spots, wash the car thoroughly and perform a full-body polish using a polishing machine with a fine finishing compound, setting the machine speed between 1200 to 1500 RPM. Wash the car frequently and try to park it in a garage or cover it with a car cover. Cleaning wax and polishing are the most cost-effective methods to treat water spot stains on cars. If these methods fail to remove the water spot stains, the only remaining option is a full-body repaint. A full-body repaint is expensive and can significantly reduce the resale value of the car. Therefore, to avoid such situations, car owners should pay attention to regular paint maintenance.
17
3
Share

What lights should be turned on during daytime driving?

During daytime driving, turn signals should be activated as required when making turns, and headlights should be turned on in advance when entering tunnels. In conditions of low visibility such as fog, rain, snow, dust, or hail, front headlights, clearance lights, and rear position lights should be turned on. Motor vehicles must use turn signals as stipulated by regulations: the left turn signal should be activated in advance when turning left, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn; the right turn signal should be activated in advance when turning right, changing lanes to the right, returning to the original lane after overtaking, or pulling over to the roadside. Article 47 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When overtaking, a motor vehicle should activate the left turn signal in advance and switch between high and low beams or sound the horn. On roads without a central dividing line or with only one lane in the same direction, the vehicle ahead should reduce speed and move to the right to yield when conditions permit, upon receiving an overtaking signal from the vehicle behind. The overtaking vehicle should pass from the left side of the vehicle ahead only after ensuring a sufficient safe distance, and after establishing the necessary safe distance from the overtaken vehicle, activate the right turn signal and return to the original lane.
11
4
Share

Where is the carbon canister solenoid valve located on the Ford Mondeo Zhisheng?

The carbon canister solenoid valve is located beneath the engine, within the engine compartment. Here is some relevant information: 1. Gasoline: Gasoline is a relatively volatile liquid, and it tends to evaporate inside the car's fuel tank. If the evaporated gasoline vapors are directly released into the atmosphere, it can cause pollution and may not be safe. If the vapors are not released, it can lead to increased pressure inside the fuel tank, which might result in a fuel tank explosion. 2. Carbon Canister: The carbon canister absorbs the vapors produced by gasoline evaporation. If the carbon canister solenoid valve is damaged, it can cause the engine to experience insufficient power. It may also lead to increased fuel consumption in the engine.
3
3
Share

How early can a private car's annual inspection be conducted?

According to regulations, the annual inspection should be applied for within 90 days (approximately 3 months) before the due date. Additionally, all traffic violations of the vehicle must be resolved before the annual inspection. Any inspection conducted after the expiration date is considered overdue. The following items are required for the vehicle's annual inspection: 1. Compulsory traffic insurance (CTPL): Before the annual inspection, check the validity period of the CTPL, which includes the vehicle and vessel tax. If it has expired or will expire within three months after the inspection date, it is recommended to renew it in advance. 2. ID card of the owner or the agent: The vehicle owner can attend the inspection in person or authorize someone else to do so, but the agent must carry their ID card; otherwise, the inspection cannot proceed. 3. Vehicle license: In addition to the agent's ID card, the vehicle's license is also required for the annual inspection; otherwise, the inspection cannot proceed.
16
4
Share

Is it normal to have water inside the water meter glass cover?

It is normal to have water inside the water meter glass cover. This phenomenon occurs because the water used for pressure testing during installation was not completely drained, leaving water inside the glass cover. It may also be related to the water pressure in your home. The following precautions should be taken when installing a water meter: 1. The water meter should ideally be installed about one meter above the ground: Additionally, sufficient space should be left around the water meter to facilitate future maintenance, card insertion, etc. 2. Do not install the water meter in damp or heavily polluted areas: This is mainly to prevent debris from entering the water meter and affecting its normal operation. 3. The card insertion area of the water meter must not be contaminated: This is to avoid damaging the water meter's functionality and preventing it from operating normally.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.