What is the top speed of the KTM 250?

How many kilometers can the Avalon run in EV mode?

The EV mode of the Avalon refers to the pure electric mode. The range of the Avalon in pure electric mode is relatively low, and it can run about 20 kilometers in EV mode. Introduction to the Avalon: The Avalon is a mid-size 4-door 5-seater sedan with a body length of 4975mm, width of 1850mm, height of 1450mm, and a wheelbase of 2870mm. The fuel tank capacity is 60L. The Avalon is equipped with a 2.5L naturally aspirated engine and an 8-speed automatic transmission, with a maximum power of 154 kW at 6600 rpm and a maximum torque of 250 Nm. It features front-wheel drive, with MacPherson strut front suspension and E-type multi-link rear suspension. Introduction to EV mode: EV mode is the pure electric drive mode, where the car's power is entirely driven by the electric motor. This mode can be found in plug-in hybrid models, which can be driven by either fuel or EV mode. To better distinguish, EV is used to represent the pure electric mode.

12

4

Share

What is the urban fuel consumption of the Honda Avancier?

The Honda Avancier comes with two powertrain options: 1.5T and 2.0T. According to data from the Ministry of Industry and Information Technology, the official fuel consumption for the 1.5T version is 7.6 liters per 100 kilometers, while the 2.0T version has an official fuel consumption of 8.7 liters per 100 kilometers. Generally, the actual fuel consumption of the vehicle will be higher than the official figures, as the official data is measured using a relatively ideal carbon balance method. More details are as follows: 1. In reality, the 1.5T Avancier consumes 8.7 liters per 100 kilometers in normal driving mode on urban and highway combined routes. When using ECON mode and the engine start-stop function, the fuel consumption drops to 8 liters per 100 kilometers. In eco mode, while the Avancier's fuel consumption is not the lowest, it still offers a balanced performance between fuel efficiency and power. 2. The 2.0T version of the Avancier consumes 11 liters per 100 kilometers on the same combined routes. With eco mode and the engine start-stop function enabled, the fuel consumption decreases to 10.3 liters per 100 kilometers. In comparison, the Toyota Highlander of the same type consumes 9.38 liters per 100 kilometers, indicating that the Avancier does not have an advantage in terms of fuel consumption data.

12

3

Share

Does Full Car Polishing Have a Significant Impact on Car Paint?

Full car polishing does cause some damage to the car paint, but it is not very significant. If polishing is done only once or twice, it won't cause much harm to the paint. However, frequent car polishing can damage the paint to some extent, as the paint becomes thinner with each polishing, leading to a decline in the car's self-maintenance ability. Car polishing involves grinding away imperfections and oxidized or aged paint on the car's surface. It can remove the oxidized layer, effectively treat scratches, and make the paint smoother and shinier. Polishing also cleans the car body, effectively removing dirt and corrosive substances, thereby restoring the cleanliness of the paint. Polishing the car body before waxing or ceramic coating can enhance the results and prolong the duration of the treatment. The car polishing process is as follows: Washing the car: Before polishing, the car body must be thoroughly cleaned to remove dust particles and avoid secondary damage to the paint. Sanding: After washing, the car body needs rough sanding, using water sandpaper of different sizes depending on the size of surface imperfections and scratches. Polishing: After sanding, use a polishing machine along with polishing wax to perform detailed polishing on the sanded car body. Mirror restoration: After polishing, a mirror treatment agent is used to restore the mirror-like effect of the car body, followed by waxing.

17

5

Share

Does adding windshield washer fluid to coolant have any impact?

Adding windshield washer fluid to the coolant will lower both the freezing point and boiling point of the coolant. If not cleaned and replaced for a long time, it can affect heat dissipation. Moreover, windshield washer fluid has certain corrosive properties, and in severe cases, it can corrode the cooling system, leading to engine damage, which can have serious consequences. The role of coolant: Coolant is a type of cooling liquid containing special additives, mainly used in liquid-cooled engine cooling systems. It has excellent properties such as preventing freezing in winter, preventing boiling in summer, and offering year-round protection against scale and corrosion. Can different coolants be mixed? It is necessary to use the same brand of coolant. Different brands of coolant may have varying production formulas, and mixing them could lead to chemical reactions between the additives, rendering them ineffective. How to choose coolant: The basic indicators of coolant are the freezing point and boiling point. On the market, coolants come in various specifications such as -15°C, -25°C, -30°C, and -40°C. Generally, it is advisable to choose a coolant with a freezing point at least 10°C lower than the lowest temperature in your region.

2

5

Share

What Causes Fluctuations in Average Fuel Consumption?

Average fuel consumption fluctuates for the following reasons: Vehicle age: Newer cars generally have lower fuel consumption. As a vehicle ages, especially after 5-10 years of use, its fuel consumption gradually increases. Maintenance condition: Carbon buildup in the engine can lead to incomplete combustion. Proper engine maintenance and carbon deposit removal can prevent fuel consumption fluctuations caused by poor or insufficient maintenance. Road conditions: Fuel consumption is also affected by driving conditions. Rough roads or frequent traffic congestion typically result in higher fuel consumption.

13

1

Share

How Often Should Engine Belts Be Replaced?

Automotive engine belts generally need to be replaced every 2 years or approximately 60,000 kilometers. The following conditions also indicate that the generator belt needs replacement: 1. When inspecting the belt, if core fractures or groove cross-section cracks are found, immediate replacement is necessary. 2. If the belt's cover layer separates from the tension cords or the cords become frayed, the belt must be replaced. 3. When the belt is placed on the pulley, there should be a gap between the belt's inner diameter and the bottom of the pulley groove. If no gap is present, the belt must be promptly replaced.

12

2

Share

What is the top speed of the KTM 250?

How many kilometers can the Avalon run in EV mode?

What is the urban fuel consumption of the Honda Avancier?

Does Full Car Polishing Have a Significant Impact on Car Paint?

Does adding windshield washer fluid to coolant have any impact?

What Causes Fluctuations in Average Fuel Consumption?

How Often Should Engine Belts Be Replaced?

What grade of gasoline is suitable for Jetta VS5?

Will spilled engine oil burn if it's on the outside of the engine?

What is the optimal mileage for the first maintenance of a new car?

Are There Age Restrictions for Motorcycle Licenses?