What is the top speed of the CFMOTO 250SR Track Edition?

1 Answers
DePaul
07/29/25 4:18pm
150 km/h. Vehicle specifications: Length x Width x Height: 2010×750×1080mm, Wheelbase: 1360mm, Seat Height: 780mm, Fuel Tank Capacity: 12L, Curb Weight: 165kg, Color Options: Starlight Black, Starlight White. Engine specifications: Engine Type: Single-cylinder, liquid-cooled, DOHC, Displacement: 249cc, Bore x Stroke: 72×61.2mm, Maximum Power: 20.5kW/9750rpm, Maximum Torque: 22Nm/7500rpm, Compression Ratio: 11.3:1, Clutch Type: Slipper Clutch, Clutch Operation: Mechanical Cable, Throttle Type: Mechanical Throttle, Power Modes: Sport, Economy, Emission Standard: China IV. Chassis specifications: Handlebar: Clip-on Handlebar, Rear Swingarm: Stamped Sheet Metal Integrated, Rim: Aluminum Alloy, Front Tire: 110/70R17, Rear Tire: 140/60R17, Front Suspension: Φ37 Inverted Hydraulic Damping Shock Absorber, Rear Suspension: Center Shock Absorber, Front/Rear Suspension Travel: 110/46mm, Front Brake: Φ292mm Single Disc, Opposed Four-Piston Caliper, Rear Brake: Φ220mm Single Floating Disc, Single-Piston Floating Caliper, ABS & CBS: ABS. Other configurations: Headlight: LED, Taillight: LED, Turn Signal: LED, Instrument Panel: TFT Display with Bluetooth Phone Connectivity, T-BOX: Standard.
Was this review help?
6
3
Share
More Forum Discussions

Where to Add Transmission Fluid for the 2018 Touareg?

The transmission fluid filler port for the Touareg is located underneath the transmission, featuring a hex socket screw. Loosen this screw and insert the filler tube to add transmission fluid. Below are relevant details: 1. Transmission fluid is a lubricant that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and minimizes fluid loss under harsh operating conditions. 2. The Volkswagen Touareg utilizes a dual-clutch transmission that combines the advantages of manual and automatic transmissions. Instead of a torque converter, it employs two sets of clutches that alternate to achieve seamless gear shifts. This design allows the engine's power to be fully utilized, with minimal power interruption during shifts due to the extremely short shift times. The direct shifting mechanism results in reduced power loss, improving fuel efficiency by over 10%.
7
5
Share

What are the reasons for the ABS warning light to illuminate in a car?

Car ABS warning light illuminates due to: 1. Wheel speed sensor failure; 2. ABS circuit failure; 3. ABS pump and pressure regulating solenoid valve failure; 4. ABS computer failure. The ABS light indicates a fault in the ABS system, which may cause the ABS system to stop functioning. The car will behave as if it does not have an ABS system, resulting in reduced braking effectiveness, increased braking distance, and poorer handling performance during braking. When the ABS light comes on, the fault should be promptly addressed. The function of the ABS anti-lock braking system: During car braking, it automatically controls the braking force of the brake system to prevent wheel lock-up, keeping the wheels in a state of rolling and sliding to ensure maximum adhesion between the wheels and the ground, thereby shortening the braking distance.
8
3
Share

Do I need to shift to first gear after stopping in second gear?

Starting requires engaging first gear. However, when stopping in second gear, there is no need to shift to first gear, but you should shift to neutral when stopping. Pay attention to the coordination between the clutch pedal, accelerator pedal, and gear lever when shifting gears. Below is some extended information about gear shifting: 1. Note: Always remember the principle of "accelerate before upshifting, decelerate before downshifting." Gear shifts should be timely, correct, smooth, and swift. Upshifting should not skip gears, while downshifting can. 2. Gear-speed matching: When the speed matches the gear, the car's performance is at its best, and fuel efficiency is highest. If the speed and gear are mismatched, such as high speed with low gear or low speed with high gear, it not only increases fuel consumption but also causes irreversible damage to the engine and transmission. Therefore, it is essential to maintain proper gear-speed matching while driving.
19
5
Share

Is It Possible to Shift Gears Without Pressing the Clutch?

It is possible to shift gears without pressing the clutch. Here are the relevant details: 1. During gear shifting: The clutch is just pressed but not fully engaged, meaning the clutch is not completely disengaged. The hand moves faster than the foot, and the gear is already engaged. This happens because the input and output shaft speeds of the transmission are perfectly synchronized, making it possible to shift gears without operating the clutch. 2. Additional information: The benefits of shifting gears without pressing the clutch: It eliminates the hassle of pressing the clutch, making driving more relaxed. With practice, it can significantly extend the clutch's lifespan, as repeatedly pressing the clutch can affect its durability. Due to differences in vehicle models, the gear ratios of the transmission may vary. Therefore, it is essential to precisely understand at what RPM the car needs to be in different gears for smooth matching.
6
3
Share

Do 4S shops offer car delivery services for repairs?

This depends on whether the local 4S shop offers such services. Here are some precautions to take when leaving your car at a 4S shop for repairs: 1. Agree on the price before repairs: 4S shops usually don't allow bargaining, while other repair shops might. Before repairs, clarify the parts to be repaired, the components to be used, labor costs, and the total amount to avoid unexpected additional charges. 2. Carefully inspect and verify the vehicle's exterior damage: Before repairs, check the vehicle's exterior with the repair shop staff to identify any existing dents or scratches to prevent accidental damage during repairs. 3. Try to supervise the repair process: If you're present during repairs, the workers may be more diligent, reducing the chance of minor damages to your car.
16
3
Share

How far can a Bora drive when the fuel gauge shows 0 km?

Generally, when the fuel gauge shows "0", the car can still drive about 20 kilometers. Here is some relevant information about the Bora: 1. Introduction: The Bora is the first independently designed model by FAW-Volkswagen, hailed as a new car that "inherits and surpasses the classic". In 2001, Volkswagen Group officially launched the new sedan in China under the name "Bora BORA". With its dynamic design and leading technology, it established a good reputation as the "driver's car". 2. Product philosophy: As the carrier of the brand, it fully embodies the entire connotation of the Volkswagen brand's "fascinating perfection, continuous innovation, life companion, and responsibility for the human environment". It is a faithful embodiment of the core values of the Volkswagen brand, and its core concept is "to set an example for the value of cars, allowing people to experience perfection."
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.