What is the tire specification of the Wuling Rongguang V?

2 Answers
LeHeidi
07/24/25 4:02pm
The tire specification of the Wuling Rongguang V is 165R14LT, where the first number 165 represents the tire width of 165MM, the middle letter "R" indicates a radial tire, 14 represents the rim diameter of 14 inches, and LT stands for light load tire. The Wuling Rongguang V tires are from the Linglong brand. The standard model is equipped with aluminum alloy wheels, featuring a multi-spoke design that looks quite refined. The practical and basic models come with steel wheels, and none of the models come with a spare tire as standard. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame. Raise the jack until it supports the car. The jack should be positioned under the vehicle. Check and ensure the jack is at a right angle to the ground. Remove the hub cover, loosen the nuts counterclockwise. Do not completely loosen the nuts; just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning. Turn the nuts counterclockwise until they are loose. Repeat this step for all lug nuts and completely remove the nuts. Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
7
3
Share
AdamRose
08/11/25 8:57am
I've been driving a van for over a decade. The standard tire specification for Wuling Rongguang V is generally 195/65 R15, which is the most common configuration. It indicates a tire width of 195 millimeters, an aspect ratio of 65%, and a wheel diameter of 15 inches. These tires are quite durable and cost-effective. As an experienced driver, I find this size suitable for both urban deliveries and family trips, offering stable grip and good fuel efficiency. I recommend checking the tread wear every 10,000 kilometers and replacing the tires when they get too thin to avoid blowouts and accidents. Additionally, when replacing tires, you can opt for wear-resistant brands of the same specification, such as the domestic Double Star, which is economical and practical. During winter driving, make sure to maintain the tire pressure at the standard value, as both too low and too high can be dangerous.
Was this review help?
3
2
Share
Expand All
More Forum Discussions

Is a Motorcycle Trailer Hitch Legal for Road Use?

It is legal as long as it complies with the relevant trailer regulations. The key requirement is that the trailer's weight must be less than 700KG. Every year, numerous off-road events take place, and many off-road race cars that are not road-legal are transported to the venues using trailers (a small vehicle towing a trailer platform). Below are the relevant regulations: For cargo vehicles: Cargo trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The trailer's lighting signals, brakes, connections, and safety protection devices must comply with national standards. The load capacity of the trailer towed by a cargo truck must not exceed the cargo truck's own load capacity. For passenger vehicles: Small passenger vehicles are only permitted to tow a recreational trailer or a trailer with a total weight of less than 700 kilograms. The trailer must not carry passengers. Large and medium-sized passenger vehicles, low-speed cargo trucks, three-wheeled vehicles, and other motor vehicles are not allowed to tow trailers.
4
5
Share

Can a Flood-Damaged Car Be Driven Long Distances After Repair?

No, it is not advisable for long-distance travel. For flood-damaged vehicles, rainwater has caused severe harm to the car, and even after repairs, it cannot fully return to its original condition. There remains a risk of unknown faults within the vehicle. Classification of flood-damaged cars: Water depth exceeding the wheels: At this stage, the car is only slightly flood-damaged, with minimal harm to the engine, various circuits, and electrical equipment. In most cases, it can be repaired, and the car can generally function normally after proper repairs. Water depth exceeding the dashboard: The situation inside the car becomes more complex at this point, requiring a thorough inspection of the damage to various components and wiring. Repairs may involve replacing numerous parts, being more labor-intensive, having a higher likelihood of future faults, and incurring significant repair costs. Water depth exceeding the roof: At this stage, the car is considered severely flood-damaged, and repairs are generally not recommended. Such vehicles not only require expensive repair fees but also pose substantial safety risks post-repair. It is advisable to opt for direct scrapping.
16
2
Share

What Causes Idle Shaking in Automatic Transmission Vehicles?

Manual transmission vehicles may experience slight shaking during startup as the clutch is in a semi-engaged state. Below is relevant information about car idling: 1. The function of car idling: Idling is an operational state of a vehicle where the engine runs in neutral gear. The engine speed during idling is called idle speed, which can be adjusted by modifying the throttle opening. Idling essentially means the engine is "producing power without doing work." When the accelerator pedal is fully released while the engine is running, the engine enters idle state. 2. Causes of unstable idling: Direct causes include dirty, worn, or incorrectly installed mechanical components that lead to variations in cylinder power output, resulting in imbalance among cylinders and consequently unstable idling. Indirect causes refer to abnormalities in the engine's electronic control system that cause poor combustion of the air-fuel mixture, making it difficult to balance cylinder power output and leading to unstable idling.
19
3
Share

What is Engine Braking?

Engine braking is the process of using the resistance generated by the engine's operation to slow down the vehicle. When the actual driving speed of the car exceeds the speed that should be achieved at the current gear and throttle position, the vehicle enters the engine braking state. Here are some related explanations: Braking speed: For example, if a vehicle is traveling at 60km/h and the throttle is released without disengaging the gear, the vehicle will be in a coasting state with the gear engaged. From this point onward, the vehicle's forward movement is influenced by engine braking. In this scenario, it is not the engine driving the wheels through the transmission, but rather the opposite—the wheels drive the engine through the transmission. Even without pressing the throttle, the engine maintains a high rotational speed. Situations for engine braking: When driving on long downhill sections, it is advisable to use engine braking to reduce the time spent applying the brakes, thereby preventing brake overheating, fading, or even failure. Due to different gear ratios, lower gears provide better engine braking effects. Therefore, the appropriate gear for coasting should be selected based on the steepness of the slope and the desired driving speed.
2
3
Share

Is there a time limit for handling electronic traffic violations?

If it is an on-site violation, the payment must be made within 15 days. For non-on-site violations, they can be handled before the vehicle's annual inspection. There is no specific time limit. If a violation occurs and remains unprocessed, meaning the fine has not been paid, the violation must be addressed before the vehicle can undergo inspection. Below are the relevant details: On-site violations: When a vehicle commits a violation and is caught by traffic police on the spot, the police will issue a ticket immediately. Such tickets must be paid at a designated bank within 15 days. If the fine is not paid within 15 days, a 3% late fee will be charged daily, but the total late fee cannot exceed the total fine amount. Non-on-site violations: These include violations captured by road surveillance cameras, such as speeding, running red lights, crossing solid lines, improper lane changes for turns, driving in the wrong direction, etc. These can be found online or at the traffic police station. There is no time requirement for handling these; they can be processed at any time, but they must be resolved before the vehicle's annual inspection, otherwise, the inspection will not be approved.
12
1
Share

Will the Automatic Transmission Subject 4 Exam Include Manual Transmission Questions?

Automatic transmission Subject 4 exam will include manual transmission questions. The questions for both automatic and manual transmissions are the same in the Subject 4 exam. Manual transmission is divided into 1st, 2nd, 3rd, 4th, and 5th gears. You start in 1st gear and shift up to 2nd gear when accelerating, and so on. Compared to automatic transmission, the acceleration process is slower. Automatic transmission vehicles do not require gear shifting. A manual transmission license allows driving automatic transmission vehicles, but an automatic transmission license does not permit driving manual transmission vehicles. The main content of the Subject 4 exam includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. Subject 4 extracts the requirements related to safe and civilized driving from the original Subject 1, along with safe driving skills under complex conditions and emergency handling knowledge, and places them after the actual road driving test of "Subject 3" to further assess the candidate's level of traffic awareness.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.