What is the tire specification of the Toyota Corolla?

Oushang X7 Fuel Consumption?

The actual fuel consumption of the Changan Oushang X7 is around 9 liters. More details about the Oushang X7 are as follows: 1. The Oushang X7 adopts a natural aesthetic design and space-grade painting technology. The front face features a large hexagonal grille with wave-patterned horizontal bars extending downward on both sides. The Changan Oushang Cloud Eagle logo is suspended above the grille, giving the overall design a distinctive look. Exterior configurations include full LED natural light compound headlights, dual-color straight-cut alloy wheels with a whirlwind design, and a continuous waistline design combination. 2. The Oushang X7 has a body length, width, and height of 4705/1860/1720mm, with a wheelbase of 2780mm, positioning it as a compact SUV.

5

0

Share

Should Subaru Use 92 or 95 Octane Gasoline?

Subaru's turbocharged models use 95 octane gasoline; naturally aspirated models use 92 octane gasoline. More information about 92 and 95 octane gasoline is as follows: 1. The octane ratings of 92 and 95 gasoline represent the fuel's anti-knock performance. The higher the octane number, the greater the isooctane content, indicating better anti-knock performance. 2. The higher the compression ratio, the higher the octane rating of the gasoline used: For engines with a compression ratio greater than 9:1, it is recommended to use gasoline with an octane rating above 90; for engines with a compression ratio greater than 9.5:1, it is best to use gasoline with an octane rating above 92; when the compression ratio is greater than 10:1, it is best to use 95 octane or higher-rated gasoline.

12

5

Share

Which generation of EA888 is the DBF model?

dbf model is the third generation of EA888, the second generation has been discontinued, and now the third generation is uniformly used. The specific introduction is as follows: Methods to determine which generation of EA888 it is: According to the oil-gas separator model: The first and second generation models have different oil-gas separator models, but it is difficult to distinguish between the first and second generations from appearance. Distinguishing from appearance: The second and third generations can be distinguished from appearance because the oil filler port positions are different. The third-generation engine's oil filler port is on the left rear side, while the second-generation's oil filler port is on the left side near the middle. Overall, the third generation has significant improvements and differs greatly from the first and second generations. The main differences lie in the internal mechanisms and materials, while the first and second generations are difficult to distinguish from appearance and require disassembling some parts to determine. The Volkswagen EA888 engine is a newly designed engine by Volkswagen, with main models including 1.8L and 2.0L displacements. The engine integrates technologies such as direct injection, turbocharging, and variable valve timing, achieving a balance between power and economic environmental protection.

2

Share

What is the highway fuel consumption of the Tang DM?

The Tang DM currently has 1 model available for sale. The 2021 2.0T Automatic Flagship model, equipped with a 192 horsepower engine, has an NEDC fuel consumption of 9L per 100 kilometers. Different models of the Tang DM have varying fuel tank capacities. The distance that can be covered on a full tank of fuel is as follows: For the model equipped with a 192 horsepower engine, the fuel tank capacity is 68L, and the distance that can be covered on a full tank is 68/9*100=756KM. The fuel consumption of a car is directly influenced by five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption include: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before encountering a red light can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also tend to have higher fuel consumption because greater weight requires more driving torque. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous terrain increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance, leading to higher fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during cold starts, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.

11

5

Share

What is the displacement of the Mercedes-Benz A180?

The displacement of the Mercedes-Benz A180 is 1.3T. Displacement is a specialized term in hydraulic transmission, referring to the volume of fluid inhaled or discharged per stroke or cycle. Below is a related introduction to the Mercedes-Benz A180: In terms of body dimensions: The Mercedes-Benz A180 is a compact sedan launched by Mercedes-Benz, serving as an entry-level model in the brand's lineup. In terms of body dimensions, the Mercedes-Benz A180 measures 4622mm in length, 1796mm in width, and 1454mm in height, with a wheelbase of 2789mm. In terms of the powertrain: The Mercedes-Benz A180 is equipped with a 1.3T turbocharged engine, which is an inline four-cylinder engine. This engine delivers a maximum power of 100 kW, a maximum torque of 200 Nm, and a maximum horsepower of 136 PS. It is paired with a 7-speed dual-clutch transmission. In terms of model configuration: The Mercedes-Benz A180 features a MacPherson strut front suspension and a torsion beam non-independent rear suspension.

10

0

Share

What is the fuel tank capacity of the Leiling 1.2T in liters?

The fuel tank capacity of the Leiling 1.2T is 50 liters, as officially announced. Owners who have purchased the Leiling 1.2T can also check this information on the vehicle's configuration sheet. The Leiling 1.2T uses 92-octane fuel, with a fuel consumption of 5.6-5.7L per 100 kilometers. A full tank can cover a distance of 877-892 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.

12

3

Share

What is the tire specification of the Toyota Corolla?

Oushang X7 Fuel Consumption?

Should Subaru Use 92 or 95 Octane Gasoline?

Which generation of EA888 is the DBF model?

What is the highway fuel consumption of the Tang DM?

What is the displacement of the Mercedes-Benz A180?

What is the fuel tank capacity of the Leiling 1.2T in liters?

Why is there a burnt smell during sudden acceleration with CVT?

What is a Class D License?

Which has a longer lifespan, CVT or 8AT?

What does E/T mean on a car?