What is the tire specification of the new Bluebird?

1 Answers
EvanLynn
07/30/25 12:51am
Nissan Bluebird tire specification model is 215/50-R17. The function of car tires: Car tires are one of the important components of a car, directly in contact with the road surface and working together with the car suspension to cushion the impact during driving, ensuring good ride comfort and smoothness, ensuring good adhesion between the wheels and the road surface, improving the car's traction, braking, and passability, and bearing the weight of the car. The parameters of the tire represent: Production date, tire specification. Taking the 185/60r1789h model tire as an example, the tire parameters respectively represent: 185 indicates the tire width is 185mm; 60 indicates the aspect ratio of the tire section is sixty percent; r indicates the tire has a radial structure; 17 indicates the rim diameter is 17 inches; 89 indicates the load coefficient; h indicates the speed coefficient.
Was this review help?
18
4
Share
More Forum Discussions

Is the Honda CRV's four-wheel drive a full-time four-wheel drive system?

CRV is not a full-time four-wheel drive system; it is an intelligent real-time four-wheel drive system that automatically controls based on road conditions. Below is an introduction to the relevant content: Four-Wheel Drive: Four-wheel drive refers to a form where the vehicle maintains four-wheel drive throughout the entire driving process, with the engine's output torque distributed to the front and rear wheels at a fixed ratio. This driving mode can provide better off-road and handling performance at any time, but it cannot adjust torque distribution according to road conditions and has higher fuel consumption. Real-Time Four-Wheel Drive: Real-time four-wheel drive is controlled by a computer chip that switches between two-wheel drive and four-wheel drive. On normal road surfaces, the vehicle operates in two-wheel drive mode. When encountering off-road conditions or wheel slippage, the computer will detect and automatically distribute power to the other two wheels.
18
5
Share

What are the Nissan sedan models?

Including the 7th-generation Altima VC-TURBO, Sylphy, Bluebird, Sylphy Classic, and Guangqi models. Below is an introduction to the 2021 Nissan Altima: Body dimensions: The body dimensions are 4901mm in length, 1850mm in width, and 1450mm in height, with a wheelbase of 2825mm. The fuel tank capacity is 61.3 liters, and the curb weight is 1456kg. The tire specifications are 215/60R16 and 215/55R17. Except for the Premium version, which uses 215/55R17 tires, all other versions use 215/60R16 tires. Powertrain: The front suspension is a MacPherson strut independent suspension, and the rear suspension is a trapezoidal control arm multi-link independent suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 156ps, a maximum power of 115kw, and a maximum torque of 197nm. It is paired with a continuously variable transmission (CVT).
18
2
Share

What Car Brand Has a Cross Logo?

Cars with cross logos include Lincoln, Chevrolet, and Dodge. Information about these three car brands is as follows: Lincoln: Lincoln is a luxury car brand under the famous American automobile company Ford. Its logo is a cross, and it was founded in 1917 by Henry Leland. The brand is named after U.S. President Abraham Lincoln. Chevrolet: Chevrolet is an automobile brand under General Motors in the United States. It was founded on November 3, 1911, by William Durant and Louis Chevrolet. Chevrolet is also known as Chevy and was acquired by General Motors in 1918. It is now the most international and popular brand under General Motors. Dodge: Dodge is an automobile brand headquartered in the United States. The trademark uses the surname "Dodge" of the Dodge brothers. The graphic trademark features a ram's head inside a pentagon, and two logos, the small ram and the big ram, are used on the cars.
1
0
Share

What are the differences between the Envision S and the Envision?

The differences between the Envision S and the Envision can be summarized as follows: From a powertrain perspective, the Envision S is equipped with a 2.0L turbocharged engine, delivering a maximum power of 174kW and a maximum torque of 350Nm. The Envision, on the other hand, offers both 1.5L and 2.0L turbocharged engines, with maximum power outputs of 124kW and 191kW, and maximum torque outputs of 250Nm and 400Nm, respectively. In terms of body dimensions, the Envision S measures 4694 or 4686mm in length, 1839mm in width, and 1686 or 1691mm in height, while the Envision measures 4634mm in length, 1855mm in width, and 1679mm in height. Regarding wheelbase, the Envision S has a wheelbase of 2779mm, whereas the Envision has a wheelbase of 2661mm.
20
2
Share

Which cars have V6 engines in 2020?

2020 cars equipped with V6 engines include SAIC Volkswagen Teramont, Volkswagen Touareg, Porsche Macan, Audi A6L, Toyota Reiz, etc. The Audi A6L is a mid-to-large-sized sedan under FAW-Volkswagen Audi. Taking the 2021 55TFSI quattro Premium Dynamic model as an example, its powertrain is equipped with a 3.0L turbocharged V6 engine, using gasoline plus a 48V mild hybrid system as the energy type, with a maximum engine power of 250kW. In terms of body dimensions, the 2021 55TFSI quattro Premium Dynamic model measures 5050mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm. The body adopts a 4-door, 5-seat sedan structure, with a fuel tank capacity of 73L and a curb weight of 1995kg.
2
5
Share

How many models does Honda CVT have?

Honda CVT has 2 models. Below is an introduction to the transmission-related content: 6AT Transmission: Except for shifting from P to D at the start and from D to P when parking, the D gear can be used from beginning to end. The Sport gear can be used when starting, but on flat roads, the speed increase with Sport gear is not as fast as with D gear. The S gear has excellent acceleration performance and is used for overtaking once a certain speed is reached. When the car is running, shifting the D gear to the left switches to M mode, where the gear lever can be pushed forward or backward to control the gears. Classification: Car transmissions can be divided into manual transmissions and automatic transmissions, with AT being the commonly referred automatic transmission. Generally, automatic transmissions have gears such as P, R, N, D, 2, 1, or L. 6AT indicates six forward gears, meaning there are six sets of gear groups with different transmission ratios. Others include 4AT, 8AT, 9AT, and even 10AT. Although the numbers differ, they are all derivatives of automatic transmission technology.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.