What is the tire specification for the ninth-generation Accord?

What does the yellow TC indicator light mean?

The TC with a slash yellow light on the car is the Traction Control System, also known as the Track Control System. Generally, when this indicator appears on the car dashboard, it is normal for it to light up when the car is just started. The system will automatically detect the status of the traction control system, and it will turn off after the detection is normal. If it stays on, it may be because the traction control system is turned off, and you need to find the control switch of the system to turn it on, usually located next to the vehicle's gear lever. If it is not because the traction control system switch was accidentally turned off, there may be a fault in the traction control system, and it is necessary to promptly confirm the fault and its cause. If there is a fault, it is necessary to go to a professional repair shop in time. Extended information: 1. The working principle of the traction control system is to replace the mechanical connection between the accelerator pedal and the throttle with an electronic throttle device. The sensor transmits the information of the accelerator pedal to the ECU, and the ECU generates a control voltage signal based on this signal. Then, the servo motor adjusts the throttle according to the signal, thereby reducing the throttle opening and controlling tire slip. For car owners driving in rainy or snowy weather, it can reduce phenomena such as vehicle skidding or loss of control. 2. Because the car's traction control system fails, the car may not be able to obtain the best traction, which may cause the car to not start or accelerate smoothly when driving on slippery roads, and it may still skid in place, leaving the car's drive wheels in a state of idling.

7

5

Share

What are the precautions for picking up a car?

Introduction to precautions for picking up a car: 1. Check all vehicle documents. When picking up the car, be sure to check whether all the vehicle documents are complete, otherwise it will affect subsequent registration, such as the purchase invoice, certificate of conformity, vehicle consistency certificate, motor vehicle registration certificate, three-guarantee certificate, vehicle user manual, new car delivery confirmation form, etc. 2. Inspect the vehicle's exterior. Check for scratches and wear on the paint by parking the vehicle in an outdoor area with sufficient light and then examining whether the paint is even. 3. Check the glass production date. The numbers represent the most recent production year, and the dots represent the production month. If the dots are on the left side of the number, it means the glass was produced in the first half of the year—subtract the number of black dots from 7 to get the specific month. If the dots are on the right side of the number, it means the glass was produced in the second half of the year—subtract the number of black dots from 13 to get the specific month. 4. Check the degree of wear. Observe whether there is obvious wear on the tire surface; new tires usually have intact tread hairs. 5. Inspect the engine compartment. Check if the engine compartment is clean. If the vehicle has been used, some areas may have hidden dirt or accumulated dust. Also, check whether the engine oil and other fluids are sufficient. After starting the engine for a while, check for any oil or fluid leaks in the compartment. Once the engine cools down, check for any abnormalities in the engine oil. 6. Test the vehicle's functions. Test various functions, such as whether the lights work properly, whether the air conditioning cools, whether the audio system operates normally, whether the wipers function correctly, and whether the windows roll up and down smoothly. After starting the engine, carefully observe whether the idle speed is stable, whether the steering wheel vibrates noticeably, whether the front and rear seats vibrate significantly, and whether there is any noticeable noise inside the car.

5

1

Share

Does a Faulty Three-Way Catalytic Converter Sensor Affect the Car?

A faulty three-way catalytic converter sensor does affect the car, with the following consequences: 1. Increased vehicle exhaust pollution; 2. Illumination of the engine warning light; 3. Inability of the engine to precisely control fuel injection, leading to increased fuel consumption and reduced power; 4. Significant carbon buildup inside the cylinders. The function of the three-way catalytic converter sensor is to convert harmful exhaust gases such as CO, HC, and NOx into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. The principle of the three-way catalytic converter sensor is to disrupt normal chemical reactions via redox reactions, promoting specific oxidation-reduction chemical processes.

13

0

Share

What is the appropriate tire pressure for Xiaomi balance scooters?

Xiaomi balance scooters' tire pressure should be maintained at 30-35psi. Functions: Prevent accidents, extend tire service life, and reduce wear on the suspension system. Handling tire pressure monitoring system faults: Display the tire pressure and temperature readings on the dashboard to check for any abnormalities. Inspect underinflated tires for air leaks. Verify if the tire pressure monitor is malfunctioning. Braking performance: Reduced tire friction and adhesion will negatively impact braking effectiveness. Ride comfort: Causes steering wheel vibration and deviation, decreasing driving comfort while also posing certain safety risks.

13

5

Share

What engine does the Ford Tourneo use?

The Ford Tourneo is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 203 PS, a maximum power output of 149 kW, and a peak torque of 300 Nm. It is paired with a 6-speed automatic transmission. Taking the 2020 Ford Tourneo as an example, it belongs to the commercial vehicle category, with body dimensions of 4976 mm in length, 2095 mm in width, and 1990 mm in height, a wheelbase of 2933 mm, and a fuel tank capacity of 80 liters. The 2020 Ford Tourneo features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension with air springs.

12

2

Share

What is the reason why the left middle door of the Buick GL8 cannot be opened?

It may be due to a broken handle, and it is recommended to get it repaired. Here is some information about Buick: 1. Introduction: Buick is an automobile brand marketed by General Motors in the United States, Canada, and China. It is sold in North America, China, CIS countries, and the Middle East. 2. Buick Care: Proactive reminder and greeting service for active concern; One-on-one consultant-style service for personalized care; Quick maintenance channel service for efficient care; Transparent management of parts prices and labor hours for honest care; Professional technical maintenance certification service for expert care; Two-year or 40,000-kilometer quality guarantee for assured care.

1

4

Share

What is the tire specification for the ninth-generation Accord?

What does the yellow TC indicator light mean?

What are the precautions for picking up a car?

Does a Faulty Three-Way Catalytic Converter Sensor Affect the Car?

What is the appropriate tire pressure for Xiaomi balance scooters?

What engine does the Ford Tourneo use?

What is the reason why the left middle door of the Buick GL8 cannot be opened?

Is Variable Steering Ratio Automatic?

Can You Still Drive with Insufficient Pressure in the Left Rear Tire?

Can a stall loudspeaker be connected to a car battery?

Can I switch from manual to automatic transmission when applying for a driver's license?