What is the tire specification for the GAC Trumpchi GS4?

3 Answers
StCamila
07/28/25 4:38pm
The tire specification for the GAC Trumpchi GS4 is 215/60R17 or 215/55R18. Taking 215/60R17 as an example, the tire width is 215mm, the aspect ratio is 60, 'R' stands for radial tire, and '17' means it can be mounted on 17-inch rims. The maintenance methods for tires are: 1. Regularly clean stones from the tire treads; 2. Reduce exposure to direct sunlight; 3. Timely check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits, choose road surfaces carefully while driving, avoid objects that can puncture or scratch tires, and steer clear of chemical spills that may corrode tires.
Was this review help?
17
0
Share
DelLily
08/11/25 8:51pm
I've been driving a GS4 Trumpchi for several years. This model usually comes with several tire specifications. Mine is 225/60 R17—where 225 represents the width of 225 millimeters, 60 is the aspect ratio of 60%, and 17 is the rim diameter of 17 inches. Some higher-end versions use 225/55 R18 or even larger sizes. The size choice directly affects the driving experience: larger sizes offer better handling but slightly higher fuel consumption, while smaller sizes are more comfortable and economical. As an owner, it's essential to check your car's nameplate or manual for confirmation, as configurations may vary by year. When replacing tires, I stick to the manufacturer's recommended specifications to avoid instability or accelerated wear from improper size changes. I also check the tire pressure monthly, keeping it between 2.3-2.5 bar to extend tire life and save fuel. Remember, check the tread depth before the rainy season—safety first!
Was this review help?
2
5
Share
Expand All
TheoLynn
09/29/25 7:26am
Working in an auto repair shop for years, I've noticed that the GAC Trumpchi GS4 commonly uses 225/60 R17 tires. The numbers are straightforward: 225mm width, 60% aspect ratio, and 17-inch rims. However, if you have the sport version, the rim size might upgrade to 18 inches. Incorrect tire sizes can cause issues—I've handled many cases where wrong tire replacements led to soaring fuel consumption or steering wobbles. Always check the placard label on the door frame for accurate specs. The speed rating is typically H (up to 210 km/h), and opt for winter tires with the M+S symbol. For maintenance, check tire pressure and tread wear every six months; replace immediately if tread depth falls below 1.6mm. Stick to OEM-spec brands like Dunlop or Continental for safety and reliability.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

Is it illegal to install widebody kits on modified cars?

Installing widebody kits on modified cars is illegal. Below is relevant information about car modifications: 1. Purpose: To enhance power performance. The modification of the powertrain system is the most crucial aspect of car modification. To improve a car's power, it is necessary to replace components such as spark plugs, high-voltage wires, air filters, fuel-saving accelerators, water-fuel devices, horsepower boosters, electronic rectifiers, and exhaust pipes. 2. Modification Methods: Enhancing car performance by modifying the engine involves increasing engine power while reducing fuel consumption, lowering exhaust emissions, and extending the engine's lifespan. The primary goal is to ensure that the combustible gases entering the engine are fully and completely mixed, allowing the powerful spark plugs to ignite the mixture for complete combustion. This involves replacing and upgrading components and installing auxiliary products to improve engine performance from three aspects: the air intake system, electrical system, and fuel system. The biggest advantage of this method is that the modified parts can be easily installed and removed, allowing the engine to be restored to its original state when not in use.
15
1
Share

Can the Clutch Control Vehicle Speed?

The clutch can control vehicle speed. Below are techniques for using the clutch to control speed: 1. Place the ball of your foot on the clutch pedal with your heel touching the ground. When the clutch is fully depressed, keep your knee slightly bent. 2. Female drivers should avoid wearing high heels. Never use only the toes to press the pedal or lift the heel off the ground, as this may lead to insufficient force or slippage. 3. Remember the positions of the clutch, brake, and accelerator—left foot for the clutch, right foot for the accelerator and brake. Additional information: Below are precautions for clutch usage: 1. During normal driving, do not rest your foot on the clutch pedal. 2. Avoid riding the clutch (partial engagement) while driving. In special cases where partial engagement is necessary, minimize the duration to prevent burning the clutch friction disc. 3. Do not release the clutch too abruptly. Generally, first gear requires the slowest release, while other forward gears should be slightly quicker.
18
5
Share

What does CNL mean on a car?

CNL on the car steering wheel is an abbreviation for "cancel," meaning to deactivate the cruise control operation. More information about cruise control is as follows: 1. The cruise control system is also known as the speed control device, speed control system, or autonomous driving system. 2. The function of cruise control: After setting the speed as required by the driver, the vehicle automatically maintains the speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. 3. The cruise control controller is generally located near the steering wheel and is mainly divided into lever-type, steering wheel button-type, and steering wheel control group-type.
10
3
Share

How to judge the distance around the car?

Methods to judge the distance around the car: 1. Judge based on the position of the left wheels, provided that you know where the left wheels will pass to avoid the tires pressing on solid lines or avoiding potholes and stones on the road; 2. Judge through the side mirrors, which can observe the distance between the vehicle and the lane dividers to adjust the vehicle's position, or check the left and right distance through markers on the dashboard or the hood. When the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters. According to the Road Traffic Safety Law of the People's Republic of China: When a motor vehicle is driving on the highway and the speed exceeds 100 kilometers per hour, the safe distance should be more than 100 meters; when the speed is below 100 kilometers per hour, the minimum safe distance should not be less than 60 meters.
1
5
Share

What Causes Airbags Not to Deploy?

Airbags may not deploy because the conditions for airbag deployment are not met. Necessary conditions for airbag deployment: 1. Vehicle speed is generally above 50 km/h, but the key factor is the acceleration at the moment of collision. In national certification tests, the instantaneous acceleration during collision is approximately -40g. 2. Frontal impact: The angle of impact must be within approximately 60° from the front. 3. Collision object: Rigid walls or obstacles. Airbags will not deploy when a car collides with soft objects at 80 km/h. 4. Deployment time: Within tens of milliseconds after the collision occurs.
12
5
Share

What is the Principle of Ultrasonic Sensors?

Ultrasonic sensors work on the following principles: 1. An ultrasonic sensor consists of a transmitting sensor (or wave transmitter), a receiving sensor (or wave receiver), a control unit, and a power supply. 2. The transmitter sensor is composed of a transmitter and a transducer using a ceramic vibrator with a diameter of about 15mm. The transducer converts the electrical vibration energy of the ceramic vibrator into ultrasonic energy and radiates it into the air. 3. The receiving sensor consists of a ceramic vibrator transducer and an amplifier circuit. The transducer receives the wave, generates mechanical vibrations, converts them into electrical energy, and outputs it as the sensor receiver, thereby detecting the transmitted ultrasound. 4. In practical applications, the ceramic vibrator used as a transmitting sensor can also be used as the ceramic vibrator for the receiving sensor. The control unit mainly controls the pulse chain frequency, duty cycle, sparse modulation, counting, and detection distance of the transmitter.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.