What is the tire specification for Tesla Model Y?

1 Answers
RosalieLynn
07/30/25 6:43am
The 2021 domestically produced Tesla Model Y comes with 19-inch Gemini wheels as standard for the Long Range All-Wheel Drive version, with tire specifications of 255/45R19. The Performance version, on the other hand, features 21-inch wheels with tire specifications of 255/35R21. Here are some related details about the Tesla Model Y: 1. Detail One: The Model Y is a mid-size SUV with dimensions of 4751mm in length, 1921mm in width, 1624mm in height, and a wheelbase of 2890mm. The Model Y is an entry-level model from Tesla, built on the same platform as the Tesla Model 3. 2. Detail Two: The Model Y is a dual-motor vehicle, equipped with motors on both the front and rear axles. It comes in Long Range and Performance versions. The Long Range version has a total motor power of 258kW and a total torque of 527 Nm, while the Performance version boasts a total motor power of 340kW and a total torque of 639 Nm. 3. Detail Three: The Model Y uses ternary lithium batteries across all models. Most pure electric and plug-in hybrid vehicles utilize ternary lithium batteries, which are lighter and have higher energy density. The cathode of these batteries is made from ternary materials.
Was this review help?
11
1
Share
More Forum Discussions

What Causes Soft Brakes in Cars?

Air entering the brake fluid lines or long-term failure to replace brake fluid are the main reasons. Here are the specific details: Main causes: Air in the brake fluid lines can make the brake fluid seem insufficiently powerful under high pressure. Not replacing the brake fluid can lead to impurities and moisture inside, affecting the transmission of braking force. Leaks in the brake master cylinder or brake fluid lines can also cause the vehicle's brakes to feel soft. Precautions: Body maintenance and detailing, interior detailing, paint treatment for oxidation film, overspray, and acid rain, treatment for deep and shallow paint scratches, repair of damaged paint panels, and full vehicle repainting. Car protection includes installing anti-theft devices, parking sensors, static dischargers, and car voice alarm systems.
18
5
Share

Can different brands of engine oil be mixed?

No, different brands of engine oil use different additives. Here is a detailed introduction of relevant information: Relevant part: Engine oil is the lubricating oil for engine operation, which plays the roles of lubrication, cleaning, cooling, sealing, and reducing friction. The oil filter is the component that filters the engine oil. During the engine working process, metal shavings generated by friction of various components, impurities in the inhaled air, and oxides of engine oil are all objects filtered by the oil filter. Effects of mixing: Mixing different grades of engine oil will cause turbidity, mixing different brands of engine oil will also cause abnormal smoke in the exhaust, and mixing different engine oils will produce sludge, causing the engine to overheat and changing its anti-wear performance.
17
3
Share

What Are the Reasons for the Key Not Being Detected by One-Button Start?

Key battery depletion, poor battery contact, signal interference, and internal system issues can cause the one-button start system to fail to detect the key. Key battery depletion: When pressing any button on the key, if the vehicle key indicator light does not illuminate, it indicates the key battery is depleted, and the key naturally cannot be sensed. Poor battery contact: Poor contact with the internal button battery prevents the battery from supplying power to the key. Signal interference: The car key cannot sense the vehicle due to nearby signal interference sources, whose emitted interference signals disrupt the sensing between the key and the vehicle. Internal system issues: Some vehicles experience errors after internal system upgrades, causing the key and vehicle sensing information to mismatch, preventing the vehicle from starting. Solutions for the key not being detected by one-button start: For a depleted key battery, replace the battery to ensure the key has power to sense and start the vehicle. For poor battery contact, open the key battery cover, adjust the battery position, or remove and reposition the battery to check if power is restored. For signal interference, apply electromagnetic shielding to the vehicle start sensing pad or locate and disable the interference source to prevent signal disruption. Internal system issues cannot be resolved independently; seek assistance from a professional automotive technician or tow the vehicle to a nearby 4S shop for maintenance and inspection.
16
4
Share

What does the BMW computer's warning 'Engine Abnormal, Attention Required for Inspection' mean?

BMW computer's warning 'Engine Abnormal, Attention Required for Inspection' indicates abnormal working temperature of the car engine, excessive pressure, and poor condition of the cooling system. Poor condition of the cooling system: The traditional method is to drain the water from the radiator and add antifreeze and water. However, this method cannot completely remove the large amount of scale in the cooling system, and the residual deposits in the water pump, water jacket, and pipes cannot be expelled. Therefore, it is necessary to regularly use a high-efficiency radiator cleaner to remove rust and corrosion from the radiator and cooling system, and then add appropriate antifreeze and clean water. This ensures the normal operation of the engine and extends the overall lifespan of the radiator and engine. Factors affecting engine startup: Compression ratio, valve sealing, and piston sealing. Normal engine startup requires normal cylinder pressure, which is determined by both the compression ratio and the sealing of the cylinder.
4
2
Share

What are the reasons for the reverse light not working on a Volkswagen Golf?

The reasons for the reverse light not working on a Volkswagen Golf are as follows: Blown fuse for the reverse light: The reverse light fuse in the car is located inside the instrument panel. Follow the instructions on the fuse box to locate the reverse light fuse, and you can pull it out to check if it is blown. Broken filament in the reverse light bulb: Simply remove the tail light and take out the bulb to check if it is functioning properly. Issue with the reverse light switch: The reverse light will only illuminate when the reverse light switch is properly engaged. Disconnect the reverse light switch plug and bridge the switch with a wire. If the reverse light turns on, it indicates that the reverse light switch is faulty. If it does not turn on, the switch is not the problem.
2
5
Share

Can You Drive with a Locked Driver's License?

No, you cannot drive. Below is the detailed information regarding this situation: Main reason: A locked driver's license indicates that the license is in a state of unresolved violations and cannot be used or processed for any services. When traffic police authorities impose administrative penalties such as temporary suspension or fines on the violator, and the violator fails to pay the fine at the designated bank as required, the system will lock the driver's information. Locking conditions: The motor vehicle driver's license has a record of a single violation with 12 penalty points, the motor vehicle driver's license has an unresolved drunk driving record, the motor vehicle driver's license has an unresolved traffic accident, the motor vehicle driver's license is in a temporary suspension period, or the motor vehicle driver's license is in a revocation period.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.