What is the tire size of the Volvo XC90?

1 Answers
DeHarper
07/25/25 2:09am
The tire size of the Volvo XC90 is 275/45R20. The first number, 275, represents the tire width of 275MM. The number 45 indicates the aspect ratio of the tire section is 45, meaning the section height is 45% of the width. The number 20 represents the rim diameter of 20 inches, and the middle letter "R" stands for radial tire. The brand of the Volvo XC90 tires is Hankook, featuring a dual-color splicing style, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow these steps: Retrieve the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and hand-tighten the nuts until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the following common data is also marked on the tire: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire, facilitating practical use, such as "Standard Rim 5.00F".
Was this review help?
7
1
Share
More Forum Discussions

What is the solution when the tire pressure warning light appears on a car?

The solution when the tire pressure warning light appears is: immediately inspect the tires, measure the pressure of each tire and inflate them if necessary. The hazards of excessive tire pressure include: 1. Reduced tire friction and adhesion, affecting braking performance and tire lifespan; 2. Decreased puncture resistance, increasing the risk of tire blowouts; 3. Accelerated wear on the central tread pattern, shortening tire life, increasing vehicle vibration, and affecting the lifespan of other components; 4. Excessive stretching of tire cords, reducing tire elasticity and increasing the load on the vehicle while driving, further decreasing puncture resistance; 5. Increased susceptibility to punctures from road hazards like nails or sharp glass objects, which can cause internal cracks or ruptures leading to blowouts.
6
5
Share

What are the reasons why car air conditioning refrigerant cannot be added?

Car air conditioning refrigerant cannot be added because there is a blockage in the air conditioning system. The role of the refrigerant is: to use its own physical changes to remove the heat inside the car. Under high pressure, the refrigerant forms a liquid while releasing heat. The functions of the air conditioning system: 1. Achieve a cooling effect by continuously changing the circulation of the refrigerant; 2. Draw in fresh external air for ventilation and air exchange, preventing the windshield from fogging up; 3. Use the engine coolant, waste heat, or heat generated by a burner as a heating source, which is heated by the heater and blown into the car by the blower to raise the temperature and achieve a heating effect; 4. Remove dust, odors, smoke, and toxic gases from the car's air, making the air inside the car fresh, and humidify the car's air to increase the relative humidity of the air inside the car.
20
1
Share

What are the causes of abnormal noise in the transmission?

The causes of abnormal noise in the transmission are: 1. Wear and damage to bearings can generate abnormal sounds during normal operation; 2. Loose bolts on the transmission housing; 3. Loose grooves between the shift lever and shift fork in manual transmissions; 4. Failure to replace automatic transmission fluid for an extended period, leading to direct friction between components and causing abnormal noise. The functions of the transmission are: 1. To change the transmission ratio, expanding the range of torque and speed variation of the driving wheels to adapt to frequently changing driving conditions, while allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse while maintaining the same engine rotation direction; 3. To utilize neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitating gear shifting or power output in the transmission.
7
3
Share

What is the most comfortable temperature for car air conditioning?

In summer, set the car air conditioning between 21°C and 25°C; in winter, set it between 25°C and 28°C. Car air conditioning cools, heats, ventilates, and purifies the air inside the vehicle, providing a comfortable environment for passengers, reducing driver fatigue, and improving driving safety. Here are specific reasons why car air conditioning may produce odors: 1. When the air conditioning system operates, moisture in the air forms condensation on the surface of the condenser and evaporator, creating a breeding ground for mold, aspergillus, penicillium, and dust mites in the system. 2. Passengers smoking in the car produces nicotine. 3. Odors emitted from rubber, plastic, and leather materials inside the car. 4. External smoke, dust, and exhaust fumes entering the car.
11
5
Share

What is the definition of an OBD interface?

OBD interface refers to the On-Board Diagnostics system. Here are the specific details about the location of the OBD interface: 1. Above the driver's left foot position; 2. Above the brake pedal; 3. Above the accelerator pedal; 4. Below the ashtray in front of the gear shift lever; 5. Below the glove compartment on the passenger side; 6. Near or inside the center console. Here are the specific details about the functions of the OBD in a car: 1. Detects component and system failures to ensure vehicle emissions do not exceed OBD requirements during its lifespan; 2. When an emission-related fault is detected, the OBD system can alert via the MIL (Malfunction Indicator Lamp) on the dashboard; 3. Ensures timely repairs of faulty vehicles, reducing emissions; 4. The OBD system aids in diagnostics and targeted repairs.
9
5
Share

Which region does the license plate 'Fang E' belong to?

Currently, there is no license plate starting with 'Fang E'. There are license plates starting with the character 'Su', which belong to Jiangsu Province. The license plate codes for various regions in Jiangsu Province are as follows: Su A is Nanjing, Su B is Wuxi, Su C is Xuzhou, Su D is Changzhou, Su E is Suzhou, Su F is Nantong, Su G is Lianyungang, Su H is Huaiyin, Su J is Yancheng, Su K is Yangzhou, Su L is Zhenjiang, Su M is Taizhou, Su N is Suqian. A license plate is the abbreviation for a vehicle license plate and a vehicle driving license. It is a hard number plate with a unified format and style as stipulated by national vehicle management regulations, issued by vehicle management authorities after reviewing, inspecting, and registering vehicles that have applied for license plates.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.