What is the tire size of the Tiida?

2 Answers
LaValeria
08/26/25 5:38am
The tire sizes of the Tiida are 16 inches and 17 inches, with specifications of 205/50R17 and 195/60R16. The tire specifications and sizes are indicated on the sidewall of the tire. Different configurations of the same model may have varying tire specifications and sizes. Here are the functions of car tires: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power performance, braking performance, and passability; work together with the car's suspension to mitigate impacts during driving and dampen resulting vibrations. 3. Protect car components from severe vibrations and premature damage, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
Was this review help?
6
2
Share
GeorgeDella
09/08/25 7:56am
I've been driving my Tiida for three years. My car is the 2019 Zhixing edition, with tire size 195/60 R15, meaning 15-inch wheels. That time out of curiosity before changing tires, I carefully checked the label and clearly saw the numbers written there. Driving with 15-inch wheels feels just right – not much tire noise in the city, fuel-efficient and comfortable. Some higher-end models like the Zunxiang edition might upgrade to 16-inch wheels; larger rims offer better handling but slightly higher fuel consumption. If you're buying a used car or a new model, it's best to check the manual or use your phone to photograph the tire sidewall for confirmation—don't trust online guesses. I once missed reminding a friend to check size compatibility, which caused issues during tire replacement and nearly affected braking. Now I've developed the habit of measuring wear during annual maintenance to ensure safe driving.
Was this review help?
20
2
Share
Expand All
More Forum Discussions

How Long Does It Take to Drive 2400 Kilometers?

A 2400-kilometer journey's duration and cost are influenced by road conditions and the proportion of highway to regular roads. Statistics show that a 2400-kilometer drive typically takes about 27.51 hours. Below are some driving precautions: Cold Engine Warm-up: Proper warm-up helps form an "oil film" between engine components, reducing wear. Timely Gear Shifting: During the break-in period for manual transmission vehicles, shift gears promptly and appropriately to avoid incorrect behaviors like high gear at low RPM or low gear at high RPM, and avoid prolonged use of a single gear. Regular Maintenance: Follow the manufacturer's recommendations in the vehicle manual. Perform inspections and maintenance at specified intervals, including oil and oil filter changes, and a comprehensive check of the chassis system. Avoid Emergency Braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the vehicle's chassis and engine.
10
0
Share

Does a B2 driver's license still need annual review if no points are deducted?

A B2 driver's license does not require annual review if no points are deducted; simply renew it upon expiration. The specific documents required for the annual review of a B2 driver's license are as follows: 1. One 1-inch white background photo. 2. Undergo a medical examination at a designated driver's health check hospital, including items such as vision, hearing, color discrimination, height, and limbs. 3. Submit the medical examination form at the traffic police detachment office hall and receive a receipt. The annual review content for a B2 driver's license includes: 1. Road traffic safety violations and accident handling records. 2. Physical condition. 3. Points for road traffic safety violations and participation in study and examination after accumulating 12 points. Drivers holding a large passenger vehicle, tractor, city bus, medium-sized passenger vehicle, or large truck driver's license who have points deducted within a scoring cycle, as well as drivers holding other types of driver's licenses who are involved in accidents causing death and bear equal or greater responsibility without having their driver's license revoked, must participate in no less than three hours of study on road traffic safety laws and regulations, safe and civilized driving, emergency handling, etc., and receive case-based traffic accident warning education during the review.
1
2
Share

What are the symptoms of a faulty high-pressure fuel pump?

High-pressure fuel pump failure symptoms are similar to those of a gasoline pump, including severe vibration, poor acceleration, unstable idle, difficulty starting, and even stalling. More extended information is as follows: Overview: Both gasoline pumps and high-pressure fuel pumps can fail, but the probability of failure is not high. Moreover, with proper usage, they can last over 100,000 kilometers without any issues. For high-pressure fuel pumps, unlike electronically driven gasoline pumps, they are purely mechanically driven (by the camshaft), and their failures typically include mechanical damage, clogging, oil leakage, etc. Working Principle: During the suction process, the downward movement of the pump piston provides the suction force, simultaneously opening the intake valve to draw fuel into the pump chamber. In the final third of the pump cycle, the fuel pressure regulator valve is energized, allowing the intake valve to remain open during the initial upward movement of the pump piston for fuel return.
8
1
Share

Does a newly replaced battery need to be charged?

Generally, new batteries come with some charge from the factory but not fully charged, so charging is recommended. However, it can also be used directly without charging. If the new battery has been sitting for a while, it will naturally discharge over time, even if unused, and the charge may be insufficient, requiring charging. Here are some precautions for battery usage: 1. Lead-acid batteries are highly affected by temperature. For every 1°C drop in ambient temperature, the battery capacity decreases by 0.8%. At -10°C, the battery capacity is only 72% of its normal value, and at -20°C, it drops to 64%. Conversely, higher temperatures increase capacity. Therefore, temperature should be considered, though extreme temperature changes are generally not a concern. 2. Over-discharging, or deep discharging, significantly reduces battery lifespan. To avoid frequent replacements, monitor battery consumption—avoid both over-discharging and overcharging. 3. Fast charging at typical charging stations is very quick, taking about 40 minutes to fully charge, so be mindful of charging duration.
18
2
Share

Is it necessary to drive the car for vehicle transfer?

Vehicle transfer requires the car to be present on-site. Below is the process for vehicle transfer: 1. At the hall window, obtain the used motor vehicle sales contract and fill it out. This contract is in triplicate, with one copy each for the buyer, the seller, and the industrial and commercial department. 2. Drive the vehicle directly to the transfer inspection area for inspection, photography, tracing, and license plate removal. Fill out the inspection record form, and after all procedures are completed, drive the car back to the parking lot, then proceed to the transfer hall to complete the formalities. 3. After returning to the transfer hall, take a number, queue up, and wait for your number to be called. The staff will confirm that the vehicle has no violations before starting the transfer process, and the transfer fee will need to be paid. 4. After payment, proceed to the transfer acceptance window to complete the relevant procedures. Before processing, you need to fill out the Motor Vehicle Registration, Transfer, and Cancellation Form and the Motor Vehicle Import Registration Form. 5. After completing the transfer acceptance, take the receipt to the payment window to pay the transfer fee. Then, you can select a new license plate number and receive the new license plate, vehicle license, and registration certificate, marking the completion of the transfer.
5
0
Share

What engine is used in the BAIC Senova D50?

The Senova D50 is equipped with two types of engines: a 1.5-liter turbocharged engine and a 1.5-liter naturally aspirated engine. Additional information: 1. The 1.5-liter naturally aspirated engine delivers 116 horsepower and a maximum torque of 148 Nm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a CVT transmission. 2. The 1.5-liter turbocharged engine produces 150 horsepower and a maximum torque of 210 Nm. This engine also features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is matched with either a 6-speed manual transmission or a CVT transmission. 3. The Senova D50's front suspension employs a MacPherson independent suspension, while the rear suspension uses an H-type torsion beam non-independent suspension. The torsion beam suspension has a compact size, occupies less space, and is cost-effective. Using this type of suspension helps to expand the rear seating space and trunk capacity.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.