What is the tire size of the Teramont?
1 Answers
The Teramont has three tire size specifications: 265/45R21, 255/50R20, and 255/55R19. In 265/45R21, the first number 265 represents the tire width of 265MM, 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width, 21 represents the rim diameter of 21 inches, and the middle letter "R" stands for radial tire. In 255/50R20, the first number 255 represents the tire width of 255MM, 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width, 20 represents the rim diameter of 20 inches, and the middle letter "R" stands for radial tire. In 255/55R19, the first number 255 represents the tire width of 255MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, 19 represents the rim diameter of 19 inches, and the middle letter "R" stands for radial tire. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not fully loosen them, just enough to eliminate resistance, keeping the tire on the ground when first loosening the nuts ensures the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, hand-tighten the nuts until all nuts are concealed, at this point the tire replacement is complete. In addition to the model, the tire also has the following common data marked on it: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".