What is the tire size of the Nissan Teana?

Where to Add Windshield Washer Fluid in the Sagitar?

The windshield washer fluid filler port for the Sagitar is located on the left side of the engine, marked by a blue cap. Below is relevant information about the Sagitar: 1. Exterior: The new Sagitar measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. The front face continues Volkswagen's design language, featuring a three-slat grille design with added chrome trim, enhancing the car's dynamic and layered appearance. The daytime running lights are L-shaped, and the headlights are xenon. The side profile features a clean waistline that runs from the front to the rear, accentuating the Sagitar's sleek silhouette. 2. Interior: The interior adopts the MQB design style, with a wraparound dashboard and a sporty instrument cluster. The seats are fully upholstered in leather, and the steering wheel and central control area also feature leather wrapping, enhancing the luxurious feel. 3. Powertrain: The 2019 Sagitar offers three engine options: 1.2T, 1.4T, and 1.6L. The 1.2L turbocharged engine delivers a maximum power of 85 kW and a maximum torque of 175 Nm, with a 0-100 km/h acceleration time of 11.3 seconds, paired with a 5-speed manual transmission.

17

1

Share

Why can't I schedule the Subject 2 driving test?

Subject 2 scheduling fails when your appointment ranking exceeds the available test slots. Ranking rules: Driving test scheduling follows specific ranking rules. If many candidates are ranked ahead of you and the test center's available slots are already filled according to these rules, it means your appointment fails. Time sorting explanation: For first-time Subject 2 test takers, the sorting time is based on when they passed Subject 1. For repeat Subject 2 test takers, the sorting time is based on their last test date. Candidates who cancel successful appointments due to personal reasons will use their cancellation time as the sorting time.

11

1

Share

What does 12mis mean in the automotive context?

In the automotive industry, 12mis refers to: the failure mode rate reflecting component durability (mid-term 12-month failure rate). A minor service at 10,000 kilometers typically includes engine oil and oil filter replacement, along with the three essential filters: oil filter, air filter, and fuel filter. Tuyue Network's customized maintenance packages are tailored to the specific requirements of each vehicle model, ensuring exclusive service for each car. Below is extended information: The interval for minor services: The timing of a minor service depends on the effective duration or mileage of the engine oil and oil filter used. The validity periods vary among different brands and grades of mineral oil, semi-synthetic oil, and fully synthetic oil, so it's recommended to follow the manufacturer's guidelines. Oil filters generally come in two types: standard and long-life. Standard oil filters are replaced along with the engine oil, while long-life oil filters have a longer service life.

14

4

Share

How to Resolve Tesla Charging Station Red Light Fault?

When the charging station shows a red light, check whether the display screen, charging gun, or circuit board is damaged. The causes of damage can generally be divided into the following three categories: first, external accidents or natural disasters causing damage to the charging equipment; second, inherent defects or quality issues with the internal components of the machine; third, human factors. Additional information: 1. External causes: The main external components of a charging station include the card-swiping area, display screen, charging gun, emergency stop button, indicator lights, etc. These components are prone to direct damage due to accidents or natural disasters. Such losses can be compensated through property insurance claims. 2. Internal causes: The charging station is a machine used to charge electric vehicles. The machine itself may have inherent or potential defects, and various quality issues may arise during subsequent operations, leading to equipment failures. If such internal faults occur, please contact the charging station's equipment supplier for repair and inspection, and address the fault to prevent similar issues from recurring. The fault site of an electric vehicle charging station may expose dangerous parts such as circuits. It is essential to contact professional electric vehicle charging station maintenance personnel to clean up the site and avoid leaving other safety hazards. 3. Human factors: Damage caused by workers or technicians due to operational errors, lack of experience, poor skills, negligence, mistakes, or malicious actions can be claimed under "machine equipment damage insurance." If the damage is caused by improper operation, mistakes by charging users, or even malicious destruction by external personnel, such losses can be claimed under corporate property insurance.

14

0

Share

How to Use the Cruise Control on the Lynk & Co 02

Turn on the system and accelerate to over 40km/h, then press the SET button. At this point, you can release the accelerator pedal with your right foot, and the speed will be set at the current speed. Press "RES+" to increase the speed at the current rate, and press "SET-" to decrease the speed at the current rate. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. When you release the accelerator pedal, the system will restore the speed to the set cruise speed. Below are the conditions for using cruise control: 1. In principle, cruise control should be used on highways or fully enclosed roads, as complex road conditions on non-enclosed roads are not conducive to traffic safety. On national highways, some tractors lack sufficient power and often rush onto the road at small intersections, posing a serious threat to vehicles on the highway. In cruise control mode, it is easy to be caught off guard. Repeated braking also makes it difficult to maintain a stable cruise control state, losing the purpose of cruise control. 2. It is prohibited in rainy or snowy conditions. 3. It should be disabled on winding or excessively curved mountain roads. Under normal circumstances when exiting a curve, appropriate acceleration is needed to provide greater steering force. In cruise control mode, the vehicle automatically maintains a constant speed, with the accelerator controlled by the onboard computer, often posing a danger when driving on curves. In such conditions, the speed should be appropriately controlled. 4. Cruise control is also unsuitable on roads with heavy traffic.

3

4

Share

What are the 5 gears of the wiper?

The 5 gears of the wiper are as follows: 1. Spray and wipe: Spray the wiper fluid and activate the front wiper to clean the front windshield. Mainly used for cleaning the windshield, it is usually controlled by a button or push mechanism, and will automatically reset and stop when the button or push is released. 2. Wipe once: Generally opposite to the starting direction of normal wiping, it will automatically reset (i.e., stop automatically after wiping once). Mainly used when it is not raining but there is water on the windshield, to wipe away water droplets. 3. 0 gear: The stop gear, used when the wiper is not in use. 4. Intermittent wiping: Used when the rain is light, the wiper will wipe every few seconds. 5. Normal wiping: The wiper wipes continuously, used during light to moderate rain.

8

0

Share

What is the tire size of the Nissan Teana?

Where to Add Windshield Washer Fluid in the Sagitar?

Why can't I schedule the Subject 2 driving test?

What does 12mis mean in the automotive context?

How to Resolve Tesla Charging Station Red Light Fault?

How to Use the Cruise Control on the Lynk & Co 02

What are the 5 gears of the wiper?

How Long Can a 12V7 Battery Last in a Kids' Electric Car?

Is It Necessary to Replace Original Tires?

How to Reset the Tire Pressure Warning on the Roewe 360?

Is Low-Speed Jerking in a Car a Sign of Transmission Problems?