What is the tire size of the Mistra?

How Much Windshield Washer Fluid Should Be Added at One Time?

When filling up the car's windshield washer fluid, it is appropriate to fill it to the maximum level. Due to variations in different car models, the required amount differs. Some compact cars typically need about 2 liters, while others may require up to 4 liters to reach full capacity. Generally, the windshield washer fluid reservoir has a capacity of around 2 liters, meaning approximately two bottles are needed. To add windshield washer fluid, first open the front hood. The hood release lever is usually located under the dashboard in front of the driver's seat. Simply pull the lever to open the hood. After opening the hood, locate the washer fluid reservoir, which is most commonly found on the right side of the engine compartment in the majority of vehicles. The cap of the reservoir features a universal symbol resembling a windshield wiper indicator, consistent across all car manufacturers worldwide. Open the cap to add the fluid. Inside the reservoir, there is a dipstick—add the fluid gradually while checking the level, and stop once it reaches the marked line to avoid overfilling and unnecessary spillage. Currently, there is a wide variety of windshield washer fluids available in the domestic market, which can be broadly categorized into three types: summer-use windshield washer fluid, winter antifreeze windshield washer fluid, and special-effect antifreeze windshield washer fluid. The summer variant is primarily used to remove insect residues from the windshield. Drivers should select the appropriate type based on varying climate and temperature conditions. Generally, windshield washer fluids are classified into 0°C for summer use and -20°C or -35°C for winter use.

17

3

Share

How Does Insurance Cover a Car Flooded by Rain?

Automobiles need to be insured with Vehicle Damage Insurance and Special Engine Loss Insurance. Vehicle Damage Insurance: Vehicle Damage Insurance is a type of commercial auto insurance. It stipulates that if the insured or their permitted driver causes damage to the insured vehicle during an accident while driving, the insurance company is obligated to provide compensation within reasonable limits. Special Engine Loss Insurance: The scope of the Waterlogging Insurance (a part of Special Engine Loss Insurance) is relatively narrow. It generally covers various expenses arising from engine water ingress during normal driving conditions, provided that the vehicle is not restarted after the engine is flooded. However, relatively few people opt for this insurance, especially in northern regions. Important Notes on Waterlogging Insurance: Currently, many insurance companies, including PICC, Ping An, Taiping, and Bank of China, explicitly state in their Vehicle Damage Insurance policies that they will compensate for total or partial losses of the insured vehicle caused by lightning strikes, heavy rain, floods, hailstorms, tsunamis, etc. However, there is an exclusion clause that excludes damage to the engine caused by water ingress. Claims Process: After a car is flooded, the owner should contact their auto insurance customer service within 24 hours to file a claim and arrange for damage assessment. Photos of the flooded car should be taken for documentation. Normally, after contacting the insurance company, a representative will handle the claim. If not, the owner can visit the nearest insurance service point, where they will receive a repair cost estimate, details of the coverage, and the required documents and materials for the claim. Based on the provided repair cost estimate, the owner should promptly contact a repair facility to fix the car, as some electronic components may suffer further damage if not cleaned promptly after getting wet.

20

1

Share

Will Fuel Consumption Decrease After the First Maintenance?

Fuel consumption will decrease after the first maintenance. After replacing the engine oil during the first maintenance, many impurities and metal debris are removed, improving lubrication, which certainly contributes to reducing fuel consumption. For most vehicles, fuel consumption tends to decrease after the first maintenance, which also marks the end of the break-in period. During the break-in period, various components of the vehicle have not yet reached their optimal working state, naturally resulting in higher energy consumption compared to a fully broken-in vehicle. This is reflected in fuel consumption, as some fuel is wasted on the operation of components that are not yet properly broken in. Fuel consumption is somewhat related to the break-in period, but the relationship with the mechanical break-in itself is not very significant; it has more to do with the driver's habits. Mechanically, during the break-in period, the moving parts do not fit together perfectly, resulting in relatively higher friction, less smooth movement, and greater resistance, all of which contribute to higher fuel consumption. Additionally, drivers are not yet familiar with the new vehicle, which may lead to less standardized operations, such as unfamiliarity with the throttle, often pressing it too hard, or poor throttle control during acceleration. Similarly, unfamiliarity with the brake pedal may result in excessive braking, all of which can increase fuel consumption. While the basic driving techniques are the same, the throttle and brake tuning of different vehicles can vary significantly. Some vehicles have highly responsive throttles, accelerating quickly with a light press, while others may require deeper throttle input for gradual acceleration. Some brakes are very sensitive to light pressure, while others may not respond until pressed harder. Therefore, any driver needs time to adapt to a new vehicle. After the break-in period, when the mechanical components have properly settled and the driver has become familiar with the vehicle, a decrease in fuel consumption is normal.

13

4

Share

What does an exclamation mark inside a circle on a car mean?

Red exclamation mark (specifically a circle with an exclamation mark inside), this represents a warning for the braking system, mainly indicating a braking system malfunction or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark indicating a braking system fault, all other exclamation marks on a car are yellow, representing general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: An exclamation mark inside a triangle. If this symbol lights up, it indicates a general performance or component and function fault in the car. Main issues include parking sensor faults, fuel cut-off system intervention or malfunction, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: An exclamation mark inside a yellow gear. This is the automatic transmission fault warning light, indicating a transmission fault or transmission lubricant oil below the normal range. The transmission oil should be replaced promptly. Abnormal Tire Pressure: An exclamation mark with a horizontal line below a bracket. This represents the tire pressure monitoring warning light. When the car's tire pressure is too low, this warning light will illuminate. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault with the car lights. Solution: Visit a 4S shop as soon as possible for inspection and repair, or you can check by yourself, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problem.

16

2

Share

Does a Faulty Auto Start-Stop System Affect the Car?

A faulty auto start-stop system does not affect the car. The damage to the auto start-stop function will not affect the normal operation of the engine. However, it will impair the normal use of the auto start-stop feature, so drivers are advised to visit a repair facility as soon as possible for maintenance. The auto start-stop is essentially an additional feature designed to shut off the engine during short stops to save fuel. Common faults in the vehicle's start-stop system may be caused by poor wiring connections, insufficient battery charge, or excessively low battery temperature. These issues can usually be identified easily by inspecting the relevant components. Moreover, repairing the start-stop function does not require lifting the engine or transmission, nor does it cause damage to the vehicle's structural framework. Therefore, strictly speaking, auto start-stop malfunctions are not significant problems. However, it is best to address any vehicle faults promptly by visiting an authorized 4S dealership for resolution. The engine auto start-stop system automatically shuts off the engine during temporary stops while driving (e.g., at traffic lights). When it's time to move forward again, the system automatically restarts the engine. This is achieved by integrating an enhanced motor with idle start-stop functionality into the traditional engine, allowing the engine to completely shut off when idle stop conditions are met. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's command, rapidly restarting the engine for seamless transition, significantly reducing fuel consumption and exhaust emissions. The engine auto start-stop system automatically shuts off the engine during temporary stops while driving (e.g., at traffic lights). When it's time to move forward again, the system automatically restarts the engine. This is achieved by integrating an enhanced motor with idle start-stop functionality into the traditional engine, allowing the engine to completely shut off when idle stop conditions are met. When the vehicle needs to start moving again, the idle start-stop motor system quickly responds to the driver's command, rapidly restarting the engine for seamless transition, significantly reducing fuel consumption and exhaust emissions.

18

1

Share

Is Benelli a Domestic or Joint Venture Brand?

Benelli is considered a joint venture motorcycle brand. Originally an Italian motorcycle manufacturer, Benelli was later acquired by Qianjiang, making it a subsidiary of Qianjiang. Here is some information about Benelli: 1. Introduction: Benelli is one of the oldest motorcycle manufacturers in Italy and the world. 2. Italian Craftsmanship: Classic, innovative, bold, and distinctive—these are the key terms closely associated with Benelli's style. Soon, Benelli will celebrate a century of motorcycle production, and the company remains committed to its unwavering ideals of creating extraordinary products, with the values that bring these products to life enduring forever.

4

5

Share

What is the tire size of the Mistra?

How Much Windshield Washer Fluid Should Be Added at One Time?

How Does Insurance Cover a Car Flooded by Rain?

Will Fuel Consumption Decrease After the First Maintenance?

What does an exclamation mark inside a circle on a car mean?

Does a Faulty Auto Start-Stop System Affect the Car?

Is Benelli a Domestic or Joint Venture Brand?

How many days does it take to receive a new license plate by mail?

Should You Pay Attention to the 60 km/h Speed Limit on Highways?

Can a car drive with tire pressure at 150kpa?

Can I drive on the road with only compulsory traffic insurance but no commercial insurance?