What is the tire size of the Magotan?

How to Defog Windows When Driving in Winter?

Methods to defog windows when driving in winter include: 1. Opening windows to reduce the temperature difference between inside and outside the car; 2. Using the heating and air conditioning system; 3. Applying professional defogging sprays. Spray the anti-fog spray on the glass and then wipe it off, which not only removes fog but also stains and dirt. The defogging spray also forms a protective film on the glass, effectively preventing fog formation. The reasons for fogging inside the car are: 1. When the window temperature is below the dew point under certain humidity conditions, condensation forms on the window surface; 2. A temperature difference on both sides of the window causes the saturated vapor pressure on the cooler surface to be lower than the surrounding environment's vapor pressure; 3. Moisture gathers on the glass surface and forms tiny water droplets, leading to fogging.

19

5

Share

What are the hazards of forgetting to shift to P gear before turning off the engine?

The hazards of forgetting to shift to P gear before turning off the engine are: it will affect the lifespan of the transmission and engine, and not shifting to P gear can easily cause the car to roll, affecting safety. The correct operation for the owner should be: directly shift to P gear, then pull the handbrake lever, and finally turn off the engine. P gear is also called the parking gear, which relies on the engine's power to brake the vehicle. When the gear is shifted to P, a locking gear in the automatic transmission will engage to lock the transmission. The gears of an automatic transmission are P, R, N, and D. When in P gear, the automatic transmission is in neutral, and a mechanical lever will lock the output shaft to prevent the car from rolling. Of course, the gear lever should only be placed in P gear when the vehicle is completely stationary.

17

1

Share

How to Maintain Your Car in Winter?

Methods for maintaining your car in winter: 1. Regularly check the cooling system, including the radiator, water pump, belt, hoses, and coolant reservoir; 2. Check if the antifreeze is low or deteriorated; 3. Check if the engine oil is low or deteriorated; 4. Ensure the battery electrolyte is not insufficient, keeping the plates submerged by about 10mm; 5. Try to avoid using tires that have been repaired once; 6. Check if the windshield washer fluid is sufficient; 7. If the wiper blades are frozen to the windshield, never rinse them with hot water directly. Instead, turn the air conditioning to hot air and set the airflow mode to the front windshield to allow the ice on the wiper blades to melt naturally.

4

2

Share

What kind of glue is used for car bumpers?

Using AB glue is recommended for car bumpers. The application methods for AB glue are as follows: 1. First method: At room temperature (25°C), clean the surfaces to be bonded. Then apply A glue and B glue in a 1:1 ratio either by overlapping application or by applying A glue on one surface and B glue on the other, then press them together. After 2-3 adjustments, fix for 5-10 minutes. 2. Second method: At room temperature (25°C), clean the surfaces to be bonded. Mix A glue and B glue in a 1:1 ratio using a plastic mixing sheet, then apply to the surfaces to be bonded within 3 minutes and fix for 5-10 minutes. 3. Precautions: Do not mix large quantities of glue at once, ensure good ventilation during use, and avoid ingestion as the glue contains acrylate odor.

8

0

Share

Will an automatic car stall if the brake is released too quickly?

An automatic car will not stall if the brake is released too quickly. Automatic cars use a torque converter to achieve automatic clutch engagement. Pressing the brake disengages the clutch, and releasing the brake re-engages it. Before engaging a gear, pressing the brake acts like pressing the clutch. While driving, pressing the brake first applies braking and then disengages the clutch, also preventing rollback. Here is additional information: 1. An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. 2. Typically, automatic cars have six gear positions, listed from top to bottom as: P, R, N, D, S, L.

1

5

Share

How Long After Replacing a Car Windshield Can You Drive?

You can drive 1 to 6 hours after replacing a car windshield. Here are the precautions for driving after windshield replacement: 1. Control speed: Do not exceed 60 km/h. 2. Tape temperature: Remove the auxiliary fixing tape after 2 days (note the temperature must be above 5°C; if lower, extend the time). 3. Smooth roads: Avoid excessively bumpy roads (uncured adhesive may cause glass displacement, leading to wind/water leaks). 4. No car washing: Wait at least 2 days before removing the tape, then resume normal use. 5. No tinting: Avoid applying window film for 7 days. After rear windshield replacement, do not open windows for 3 days to prevent displacement caused by wind pressure.

5

2

Share

What is the tire size of the Magotan?

How to Defog Windows When Driving in Winter?

What are the hazards of forgetting to shift to P gear before turning off the engine?

How to Maintain Your Car in Winter?

What kind of glue is used for car bumpers?

Will an automatic car stall if the brake is released too quickly?

How Long After Replacing a Car Windshield Can You Drive?

How to Quickly Eliminate Cigarette Smell in the Car?

What is the difference between 99V and 99H tires?

How to Use Car Rearview Mirrors to Judge Distance

How to Open the Trunk of a Toyota Prado?