What is the tire size of the Jetour X95?

Where is the radar controller of the new Santana?

The radar controller of the new Santana is located inside the left rear trim panel of the trunk, which is a small computer board. The function of the reversing radar: The reversing radar is a safety auxiliary device when the car is parked or reversing. It can inform the driver of the surrounding obstacles through sound or more intuitive display, relieving the troubles caused by the driver's need to look around when parking, reversing, and starting the vehicle, and helping the driver eliminate blind spots and blurred vision. The main functions of the reversing radar are: Accurately measure the distance between the rear of the car and the nearest obstacle; When reversing to the limit distance, it can emit a rapid warning sound to remind the driver to pay attention to braking; It can repeatedly emit voice warnings to remind pedestrians to pay attention.

17

5

Share

How many people can the Elysion seat?

The Elysion can seat 7 people. Taking the 2019 Elysion as an example, it is an MPV with the following dimensions: length 4950mm, width 1842mm, height 1711mm, wheelbase 2900mm, minimum ground clearance 134mm, and curb weight 1941kg. The 2019 Elysion features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine producing a maximum horsepower of 146PS, maximum torque of 175Nm, and maximum power of 107kW, paired with an electronic continuously variable transmission.

12

5

Share

What is the procedure for turning off an automatic transmission car?

Automatic transmission car shutdown procedure is: 1. After stopping the vehicle, depress the brake pedal and shift the gear into P position; 2. Check the instrument panel to confirm the correct gear position, then pull up the handbrake, release the brake pedal, and press the one-touch start button to turn off the vehicle. An automatic transmission car does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The correct method for starting an automatic transmission car is: 1. Connect the power, then start the car; 2. After ignition, depress the brake, shift to D gear, release the handbrake, and gently press the accelerator to start; 3. After starting, accelerate appropriately according to road conditions.

15

1

Share

What Causes the Chassis Noise in Audi A3?

Audi A3 chassis noise causes: Loose components: Due to violent impacts or improper installation of other equipment, mutual interference occurs between two components; this can be resolved through reshaping and repair or by replacing the relevant components to eliminate interference. Loose bolts or nuts: Long-term driving on poor road conditions may cause bolts to loosen, or improper disassembly or installation may result in bolt damage or insufficient torque; bolts can be tightened or replaced if necessary. Drive shaft universal joint failure: Damaged dust covers and oil leaks that are not repaired in time may cause abnormal wear of small bearings; the outer (inner) CV joint or universal joint can be replaced.

13

4

Share

How to Remove the Central Control Panel of the Elysion?

The method to remove the central control panel of the Elysion is as follows: First, remove the Elysion's air conditioning control module. Then, use a trim removal tool to loosen and pry off the upper cover panel of the central console. Next, remove the air vents, unscrew the fixing screws around the central control, and disconnect the wiring harness at the back. After completing these steps, the central control panel can be removed. The 2019 Elysion model features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 146 PS, a maximum torque of 175 Nm, and a maximum power of 107 kW. The engine is paired with an electronic continuously variable transmission.

4

0

Share

How Many Tons Can a 4-Axle Tractor with 8-Wheels Haul?

The hauling capacity of a 4-axle tractor with 8-wheels depends on factors such as the engine's power and the vehicle's own weight. Below is a detailed introduction to this type of truck: 1. Types: 4-axle tractors with 8-wheels include various dump trucks, heavy-duty trucks, and trailer trucks. 2. Usage: As a heavy-duty vehicle, it has a large hauling capacity and is commonly used in construction and transportation. Heavy-duty vehicles refer to M and N category vehicles with a maximum gross mass exceeding 3500Kg. These vehicles typically consist of heavy-duty tractors and heavy-duty trailers forming a truck train. They usually employ multi-axle tandem hydraulic suspension systems and are designed for transporting oversized and overweight cargo that exceeds the limits set by road traffic regulations.

2

Share

What is the tire size of the Jetour X95?

Where is the radar controller of the new Santana?

How many people can the Elysion seat?

What is the procedure for turning off an automatic transmission car?

What Causes the Chassis Noise in Audi A3?

How to Remove the Central Control Panel of the Elysion?

How Many Tons Can a 4-Axle Tractor with 8-Wheels Haul?

What to Do When the Car Key Won't Open the Car?

What is the solution for the P0118 trouble code?

Do Ignition Coils Need Regular Replacement?

What does the EPS light mean?