···
Log in / Register

What is the tire size of the Haval H6?

4 Answers
EmmettFitz
07/29/25 7:27am
The Haval H6 has five tire size specifications: 225/65R17, 225/60R18, 225/55R19, 235/60R18, and 235/55R19. In 225/65R17, the first number 225 represents the tire width of 225MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 17 represents the rim diameter of 17 inches. The middle letter "R" stands for radial tire. In 225/60R18, the first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 18 represents the rim diameter of 18 inches. The middle letter "R" stands for radial tire. In 225/55R19, the first number 225 represents the tire width of 225MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 19 represents the rim diameter of 19 inches. The middle letter "R" stands for radial tire. In 235/60R18, the first number 235 represents the tire width of 235MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 18 represents the rim diameter of 18 inches. The middle letter "R" stands for radial tire. In 235/55R19, the first number 235 represents the tire width of 235MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 19 represents the rim diameter of 19 inches. The middle letter "R" stands for radial tire. The Haval H6 tires are from the brand Hankook and feature a multi-spoke cyclone-style black wheel design. The spare tire is non-full size. If you want to replace the tires yourself, follow these steps: Retrieve the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack contacts the metal part of the frame; Raise the jack until it supports the car, making sure the jack is positioned under the vehicle and at a right angle to the ground; Remove the hubcap and loosen the nuts counterclockwise. Do not fully remove the nuts; just loosen them enough to reduce resistance. Keeping the tire on the ground when loosening the nuts ensures that the nuts turn, not the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then fully remove the nuts; Place the new tire on the hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are snug. The tire replacement is now complete. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".
Was this review help?
15
1
Share
DelStephen
08/13/25 12:51am
The common tire size for the Haval H6 is 225/65 R17, which is the standard configuration. I have been driving this car for several years, and the size 225 indicates a width of 225 millimeters, 65 is the aspect ratio, and 17 is the rim diameter. When choosing tires, pay attention to the brand and date. The original Michelin or Goodyear tires are quite durable and suitable for urban road conditions. After driving tens of thousands of kilometers, I spent over 2000 yuan on new tires, ensuring they match the speed rating and load index, otherwise, it could affect driving safety. During regular driving, maintaining tire pressure between 2.4-2.5 bar can save fuel and ensure good grip on rainy days. It is recommended to rotate the tires every six months to avoid uneven wear. If the tire noise is too loud, you can opt for silent-type tires, but you need to balance fuel consumption and comfort.
Was this review help?
4
2
Share
Expand All
CalebFitz
10/04/25 7:06am
As a car enthusiast, the tire sizes of the Haval H6 are quite varied. The mainstream size is 225/65 R17, but the high-end version might use 235/55 R19. The size affects the driving feel—225 width offers agile handling in city turns and good stability at high speeds. During test drives, I noticed that the 65 aspect ratio provides higher comfort with less bumpiness on rough roads. When replacing tires, consider seasonal needs: winter tires can improve grip in cold weather, while summer tires are more fuel-efficient. Once tires age and the tread depth falls below 1.6mm, it's time to replace them—safety first. I recommend brands like Dunlop or Bridgestone for their good value. During maintenance, don’t forget wheel alignment checks to prevent abnormal wear and extend tire life.
Was this review help?
11
5
Share
Expand All
SanLilah
11/17/25 8:42am
I'm a new owner of a Haval H6 and checked the manual to find the tire size is 225/65 R17. The dimensions are straightforward: 225mm in width with 17-inch rims. It's important to maintain proper tire pressure—neither too high nor too low. Generally, checking when the tires are cold and keeping it around 2.5 bar is ideal. When replacing tires, choose the same size, such as the domestic brand Giti, which costs just over 1,500 yuan for a full set. Incorrect size matching can affect fuel efficiency and braking performance, so it's recommended to check tread depth every 5,000 km. For safe driving, reduce speed in rainy conditions to minimize skidding risks. When parking, avoid sharp objects and promptly remove any small stones stuck in the treads.
Was this review help?
2
1
Share
Expand All
More Forum Discussions

What is the purpose of car ABS?

The purpose of car ABS is to continuously switch between the critical point of tire sliding and rolling, effectively shortening the braking distance and preventing the vehicle from skidding during emergency braking. The working principle process of car ABS is: 1. The ABS system monitors the rotation speed of the four wheels. When a wheel is about to lock, the system releases the brake of that specific wheel, allowing it to resume rotation; 2. After the wheel is about to resume rotation, braking hydraulic pressure is applied to that wheel; 3. When the wheel is about to lock again, the system releases the brake of that specific wheel; 4. The system repeats the above process multiple times within one second to maximize the potential of the brakes and ensure the stability and normal operation of the vehicle.
17
5
Share

What Causes the BMW 740 to Shake During Rapid Acceleration?

Reasons for the BMW 740 shaking during rapid acceleration: Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector is largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. In this situation, the car will only start easily once the carbon deposits have absorbed enough gasoline to reach saturation. After starting, the gasoline adsorbed on the carbon deposits is then drawn into the combustion chamber by the engine's vacuum suction, causing the air-fuel mixture to become too rich. The engine's combustible mixture alternates between being too lean and too rich, leading to idle shaking after a cold start. Ignition System Issues: Check the condition of the spark plugs, high-voltage wires, and ignition coils. Poor performance in the ignition system or inadequate spark plug firing can also cause this type of problem. Unstable Fuel Pressure: If you have already cleaned the engine carbon deposits, throttle body, replaced the fuel gasket and spark plugs, but still notice the car shaking at idle, it is recommended to visit a 4S shop to check whether the fuel supply pressure and intake pressure sensor are functioning properly. Abnormal fuel pump pressure or incorrect readings and poor performance of the intake pressure sensor can also cause the car to shake.
19
4
Share

Does the replacement of the front windshield for Skoda Octavia require an original factory part?

Skoda Octavia front windshield replacement does not require an original factory part. Windshield: The function of the windshield is to provide a survival space for passengers. When impacted and shattered, the glass breaks into small pieces with blunt edges, minimizing harm to occupants. Currently, most car front windshields are made of laminated tempered glass or zoned tempered glass, which can withstand strong impacts. Zoned tempered glass is a new type of tempered glass that undergoes special treatment to maintain a certain level of clarity when cracked upon impact, ensuring the driver's field of vision remains unaffected. Precautions for windshield replacement: Do not wash the car for three days after replacing the windshield. Remove the tape securing the windshield position after three days. Avoid driving on excessively bumpy roads, sudden braking, and rapid acceleration to prevent windshield displacement. Do not insert parking permits or other cards into the gap between the front windshield and the dashboard. Avoid driving on highways and keep the maximum speed below 80 km/h. Do not apply window tinting within seven days. After rear windshield replacement, do not open the windows while driving for three days to prevent displacement caused by wind pressure.
14
1
Share

How to Set the Tire Pressure for Buick Verano?

Buick Verano tire pressure setting method: Select the tire pressure mode on the dashboard, press and hold the checkmark button to enter the learning mode, then inflate and deflate the tires in sequence to complete the setting. The dimensions of the Buick Verano are: length 4723mm, width 1802mm, height 1476mm, with a wheelbase of 2700mm. The Buick Verano is equipped with a 1.3L three-cylinder turbocharged engine, delivering a maximum horsepower of 165PS, maximum torque of 240Nm, and maximum power of 121kW. The maximum power speed is 5600rpm, and the maximum torque speed ranges from 1500 to 4000rpm. It is paired with a CVT continuously variable transmission.
2
4
Share

What Causes Manual Transmission Shudder During Startup?

Manual transmission shudder during startup is caused by: 1. Insufficient engine power; 2. Loose connection between the transmission and chassis; 3. Uneven engagement of the clutch pressure plate and clutch friction disc. The correct method for starting a manual transmission is: 1. Fully depress the clutch; 2. Shift into first gear; 3. Turn on the left turn signal; 4. Sound the horn as a reminder; 5. Release the handbrake; 6. Gently lift the clutch with the left foot; 7. As the vehicle begins to move, stabilize the clutch with the left foot, avoiding any pressing or lifting to prevent stalling. Hold steady for 3 seconds, then slowly release the clutch while gently pressing the accelerator with the right foot. Gradually release the accelerator, fully depress the clutch to shift to second gear, and repeat the process to shift to third gear, ensuring a smooth and stable vehicle startup.
19
1
Share

What engine is used in the Toyota RAV4?

The Toyota RAV4 is equipped with 2.0L and 2.5L naturally aspirated engines. The 2.0L engine has a maximum power output of 126kW and a maximum torque of 209Nm. In terms of the transmission system, the 2.0L engine is paired with a CVT continuously variable transmission. The 2.5L engine delivers a maximum power of 178kW and is matched with an eCVT continuously variable transmission. The Toyota RAV4 has dimensions of 4570mm in length, 1845mm in width, and 1715mm in height, with a wheelbase of 2660mm. It has a minimum ground clearance of 195mm and a curb weight of 1420kg.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.