What is the tire size of the GS4?

3 Answers
SanSavannah
07/29/25 2:19pm
The GS4 has two tire sizes: 225/60R17 and 225/55R18. In 225/60R17, the first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, 17 stands for the rim diameter of 17 inches, and the letter "R" in the middle denotes a radial tire. In 225/55R18, the first number 225 represents the tire width of 225MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, 18 stands for the rim diameter of 18 inches, and the letter "R" in the middle denotes a radial tire. The GS4 tires feature a five-spoke wheel rim design, giving a more powerful appearance, and are matched with Giti Comfort-F50 tires. The spare tire is non-full size. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame near the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not fully loosen them, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn, not the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are snug. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data marked on it: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire. For practical use, such as "Standard rim 5.00F".
Was this review help?
7
4
Share
DeZane
08/13/25 6:34am
The tire size of the GAC GS4 SUV is no small matter. I remember my base model came with factory-fitted 225/60R17 tires, featuring 17-inch rims, a width of 225 millimeters, and an aspect ratio of 60%. This size offers a well-balanced drive, combining comfort with solid grip. For higher trims like the Intelligent Connect version, the wheels might be upgraded to 225/55R18, with slightly thinner tires for added stability. After buying my car, I did some research—choosing the wrong size can be frustrating. Low tire pressure on long trips can increase fuel consumption, while high pressure makes the ride bumpy, so I regularly check and maintain my tire pressure at 2.2-2.4 bar. Larger wheels look stylish but must match the factory specifications to avoid higher risks of skidding during turns. In short, it’s best to check the manual or confirm with the dealership based on your model’s configuration. Avoid random modifications to ensure safety.
Was this review help?
17
5
Share
Expand All
DelSawyer
10/10/25 8:25am
When it comes to the tires of the GS4, I've seen many examples during car repairs: the standard version uses 225/60R17 tires, while higher-end models like the luxury version come with 225/55R18 sizes. The key point here is that the wheel and tire sizes must match for stability, with a width of 225 millimeters—don’t overlook the aspect ratio data, as even a slight difference can affect braking distance and comfort. Incorrect tire pressure, such as below 2.0 bar, can cause instability during high-speed cornering; if it’s too high, hitting bumps may lead to blowouts. It’s recommended that owners check tire pressure during every maintenance session and inspect tire wear. If the tread depth is less than 1.6 mm, it’s time to replace them—opt for original specifications or reputable brands like Michelin to avoid refurbished products. Getting the wrong size can be troublesome.
Was this review help?
10
3
Share
Expand All
More Forum Discussions

What causes the intermittent cooling and heating of the BYD e5 air conditioning?

Here are the reasons for the intermittent cooling and heating of the BYD e5 air conditioning: 1. Loose compressor wiring: When the air conditioning is first turned on, the compressor starts working, compressing the gaseous refrigerant in the system into a high-temperature, high-pressure gas, which is then sent to the condenser for cooling. After cooling, it becomes a high-temperature, high-pressure liquid, passing through the dryer for drying and filtration, then through the expansion valve and evaporator, before returning to the compressor. 2. Poor contact of the pressure switch: When the high-temperature, high-pressure liquid passes through the expansion valve, all the liquid expands and undergoes a drastic change, turning into a low-temperature, low-pressure liquid. This low-temperature, low-pressure liquid causes the temperature of the evaporator to drop rapidly, so the air blown by the air conditioning motor becomes cold after passing through the evaporator. 3. Compressor clutch failure: When the temperature gradually rises above 0 degrees, the ice blockage in the pipeline begins to slowly melt, and part of the pipeline resumes refrigerant circulation, restoring the cooling effect. This leads to the next cycle of ice blockage, resulting in the phenomenon where the air conditioning blows cold air when first turned on but soon turns into hot air.
18
0
Share

Which driving mode is commonly used for the BMW 530?

Here is an introduction to the driving modes of the BMW 530: 1. Eco Mode (ECO): Achieves fuel efficiency by adjusting shift logic and limiting fuel injection. In this mode, even if the driver floors the accelerator, the vehicle won't surge forward aggressively, feeling somewhat sluggish. 2. Sport Mode: Delays upshifting to provide high torque output from the start. It keeps the engine at higher RPMs, maintaining a very aggressive driving state. With enhanced power, the vehicle delivers a stronger sense of acceleration. However, the increased power inevitably leads to higher fuel consumption and greater wear on the transmission and engine. That said, occasional 'spirited' driving can help clear carbon deposits in the engine. 3. Comfort Mode: The suspension becomes softer, the steering is easier to handle, and the body sits lower. Whether going over speed bumps, braking in emergencies, or accelerating, the ride is more comfortable than usual. Power output is smoother and less abrupt.
15
0
Share

What is the emission standard for National IV?

National IV is the fourth stage of China's vehicle emission standards. Below are the relevant details: National IV Standard: The National IV standard is the fourth stage of China's motor vehicle pollutant emission standards. The main pollutants emitted by vehicles include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). The standard controls and reduces vehicle emissions to below specified levels through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices. Vehicle Emission Standards: Vehicle emission standards are established to control the emission of pollutants from vehicles. To curb the generation of these harmful gases and encourage automobile manufacturers to improve their products to reduce the sources of these pollutants, both Europe and the United States have formulated relevant vehicle emission standards. These standards are continuously supplemented, refined, and tightened as vehicle ownership increases and environmental conditions worsen. The European standards serve as a reference for China's vehicle emission standards, and currently, new domestically produced vehicles will indicate the European emission standard that the engine's exhaust emissions meet.
16
5
Share

What does it mean when the Audi A3 displays 'braking force limited' during ignition?

It indicates a malfunction in the vehicle's braking system. Common faults include brake failure, brake deviation, and brake non-return. These three types of faults can damage the vehicle in minor cases and affect driving safety in severe cases, requiring prompt attention. Below are relevant explanations: 1. Brake Booster: The brake booster is a widely used braking assistance device in vehicles ranging from light to medium-duty, which can be broadly categorized into vacuum assist, hydraulic assist, and pneumatic assist. It includes components such as a hydraulic cylinder, support arm, pressure arm, and brake plate, characterized by hydraulic rods at both ends of the hydraulic cylinder connecting to the support arm and pressure arm, with a rubber-wheeled brake plate mounted on the pressure arm. 2. Principle: The brake booster utilizes the vacuum generated in the intake manifold when the engine is running to assist braking. The booster is typically a cylindrical unit approximately 20cm in diameter and 15cm in height. Inside the cylinder, there is a diaphragm with a push rod in the middle, dividing the cavity into two parts. One part is connected to the engine intake manifold via a pipeline, while the other part is exposed to the atmosphere when the brake pedal is depressed. The pressure difference between the two sides provides assistance for braking.
10
0
Share

Where is the Mercedes-Benz engine 264920 produced?

Mercedes-Benz model 264920 engine is produced at the Mercedes-Benz main plant in Sindelfingen, Germany. The following is an introduction to the Mercedes-Benz engine related content: 1. Engine model: The Mercedes-Benz E300 uses a low-power version of the 2.0-liter turbocharged engine, the code of this engine is 264920. The Mercedes-Benz E-Class is a mid-size luxury sedan under the Mercedes-Benz brand, this model has been domestically produced. The domestic version of the model uses three engines in total, which are a 1.5-liter turbocharged engine, a low-power version of the 2.0-liter turbocharged engine, and a high-power version of the 2.0-liter turbocharged engine. 2. Engine power: The 1.5-liter turbocharged engine has a maximum torque of 184 horsepower and 280 Nm, this engine can output maximum power at 6100 rpm, and can output maximum torque at 3000 to 4000 rpm. This engine is equipped with a 48V mild hybrid system and direct fuel injection technology.
20
5
Share

What is the reason why the AC switch of Audi Q3 turns off when released?

Air conditioning AC switch itself is damaged (integrated with the control panel), replace the new switch to solve the problem. The following is the relevant introduction: 1. Car air conditioning: Car air conditioning device (air-conditioning-device) referred to as car air conditioning. It is used to adjust and control the temperature, humidity, air cleanliness and air flow in the car compartment to the best state, providing a comfortable riding environment for passengers and reducing travel fatigue; creating good working conditions for the driver, playing an important role in ensuring safe driving ventilation device. It generally includes refrigeration devices, heating devices and ventilation devices. This combined device makes full use of the limited space inside the car, has a simple structure and is easy to operate, and is an internationally popular modern car air conditioning system. 2. AC button: The A/C button controls the switch of the air conditioning compressor. That is, in summer, when the owner turns on the cold air, the A/C button needs to be turned on at the same time, so that the air conditioner will cool, and the cold air will be sent into the car, realizing the cold cycle in the car.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.