What is the tire size of the Elysion?

Should I engage the gear or release the handbrake first when starting the car?

When starting the car, you should engage the gear first. The reason for engaging the gear before releasing the handbrake is primarily for safety considerations. When starting, you may not know whether the ground is level. If it's on a slope and you release the handbrake first, the car will be in a neutral coasting state. At this point, the vehicle may roll in the direction of the slope without any braking, which can easily lead to a safety accident. However, if you engage the gear first and then release the handbrake, the car will receive a force from the engine idle when in first gear. This force can prevent the vehicle from rolling backward in neutral, effectively avoiding potential dangers.

8

1

Share

How to Fix a Polo Trunk Lock Malfunction by Yourself?

The methods to fix a Polo trunk lock malfunction by yourself are: 1. Lubricate and adjust the trunk; 2. Clean the trunk's card slot; 3. Replace the spring rod with moderate hardness; 4. Check if there is any fault in the trunk's control circuit; 5. Replace the trunk's hydraulic support rod. The maintenance methods for the trunk are: 1. Use a brush to clean dirt when washing, including the edges and grooves of the trunk, and perform odor treatment after cleaning; 2. Place items in an organized manner using separate cargo bags; 3. Lay a trunk mat to prevent dirt or liquids from entering the trunk and eroding the trunk surface, while also preventing items inside the trunk from sliding, reducing the possibility of contamination or damage.

9

3

Share

Does the Mercedes-Benz GLB have a four-wheel-drive version?

Currently, the Mercedes-Benz GLB does not have a four-wheel-drive version. All models of the Mercedes-Benz GLB are front-wheel drive. The Mercedes-Benz GLB is a compact SUV under the Mercedes-Benz brand, and all models are equipped with a 1.3-liter turbocharged four-cylinder engine. This engine is paired with a 7-speed dual-clutch transmission. The 1.3-liter turbocharged four-cylinder engine in the Mercedes-Benz GLB has a maximum power output of 120 kW and a maximum torque of 250 Nm. This engine can deliver its maximum power at 5,500 rpm and its maximum torque between 1,620 and 4,000 rpm. The engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block, which helps reduce the overall weight of the engine and, consequently, the weight of the vehicle.

17

3

Share

Why can't the car key open the door?

The reasons why the car key cannot open the door are: 1. The remote key is out of battery; 2. The car battery is out of power, or there is strong signal interference around; 3. You can use the hidden mechanical key inside the remote key to open the door. If the mechanical key also cannot open the door, it is a door lock malfunction. If the car battery is out of power, the car's sensing system will naturally fail, resulting in malfunction. In this case, the car needs to be recharged. A common issue is the car key battery running out of power, leading to malfunction. Generally, the battery life of a car sensing key is about 2 years. If the battery is dead, the door cannot be opened via sensing. For cars with a one-button start, if the key battery is dead, you can only use the spare key inside the sensing key to open the door.

2

1

Share

What is the engine model of the Mercedes-Benz GLB?

The engine model of the Mercedes-Benz GLB is 282914, which is a 1.3-liter turbocharged four-cylinder engine with a maximum power of 120kW and a maximum torque of 250Nm. The maximum power speed is 5500 revolutions per minute, and the maximum torque speed ranges from 1620 to 4000 revolutions per minute. The Mercedes-Benz GLB is a newly launched model by Mercedes-Benz, a compact SUV. The front suspension of the Mercedes-Benz GLB uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension. The dimensions of the Mercedes-Benz GLB are 4638mm in length, 1834mm in width, and 1687mm in height, with a wheelbase of 2829mm, offering good interior space performance.

19

0

Share

What lights should be used when passing a crosswalk in Subject 3?

When passing a crosswalk in Subject 3, you should alternate between high and low beams, and the alternation should be done no less than 2 times. The relevant explanation is as follows: Overview: Subject 3, also known as the road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination, which can largely test the driver's ability in actual driving situations. Use of lights: When approaching an intersection without traffic lights, alternate between high and low beams no less than 2 times; when about to overtake, first turn on the left turn signal, then alternate between high and low beams no less than 2 times, and then turn on the right turn signal; when about to meet other vehicles, turn on the low beams, etc.

15

5

Share

What is the tire size of the Elysion?

Should I engage the gear or release the handbrake first when starting the car?

How to Fix a Polo Trunk Lock Malfunction by Yourself?

Does the Mercedes-Benz GLB have a four-wheel-drive version?

Why can't the car key open the door?

What is the engine model of the Mercedes-Benz GLB?

What lights should be used when passing a crosswalk in Subject 3?

Where is the vent hole of the hydraulic cylinder located?

How often should a car be serviced under normal circumstances?

What car has a vertical logo?

Does Insurance Cover Flood-Damaged Cars in Henan?