What is the tire size of the Dongfeng Honda Elysion?

3 Answers
JaxonFitz
07/29/25 2:59pm
The tire specifications for the Dongfeng Honda Elysion are 225/50-R18-95V. Below is relevant information regarding tire maintenance for the Elysion: 1. Inspect tires at least once a month. Check the tire pressure when the tires are cold, including the spare tire. 2. If the owner notices that the pressure decreases too quickly, the cause should be identified promptly rather than simply inflating the tires at a tire shop. The inflation pressure must follow the manufacturer's specified values, as detailed in the owner's manual. 3. Wear indicators. When the tire tread wears down to these indicators, the tires must be replaced. Driving with tires worn beyond the indicators is extremely dangerous on wet roads, as the drainage performance is significantly reduced, severely affecting wet traction. 4. Regularly check wheel alignment and balance. Especially if the vehicle exhibits excessive vibration while driving, this may indicate poor wheel alignment or imbalance. These conditions not only shorten tire life but also affect the vehicle's handling and safety. If the tires show uneven wear, such as the shoulders wearing faster than the rest of the tread, consider rotating the tires. For the first rotation, cross the front and rear tires—move the front left tire to the rear right position and the front right tire to the rear left position.
Was this review help?
4
0
Share
McSophie
08/13/25 7:35am
My Elysion is the 2020 model, purchased over two years ago. I remember clearly that the tire size is 225/50 R18. The salesperson specifically mentioned at the time of purchase that this size balances stability and comfort, making it suitable for daily commuting. On the highway, the tires provide good grip and stability when turning, but it's important to regularly check tire wear and maintain proper tire pressure, such as measuring it monthly and keeping it around 2.3bar to avoid the risk of blowouts. In winter, I switched to snow tires of the same size, and the handling felt the same. If you're unsure about your car's tire size, check the door frame or the user manual for specifications—don't randomly change sizes as it can affect safety. When replacing tires, choose reputable brands like Dunlop or Michelin; they can last four to five years without issues.
Was this review help?
3
5
Share
Expand All
SanFernando
10/11/25 5:48am
As someone who frequently works on cars, I understand that the tire size for the Dongfeng Honda Elysion is typically 225/50 R18. In these numbers, 225 represents the width in millimeters, 50 indicates the aspect ratio, and R18 stands for an 18-inch wheel diameter. This size design takes into account the balance between shock absorption and fuel consumption, with high compatibility with the original factory specifications. Switching to other sizes may cause issues, such as increased vibration or higher fuel consumption. It is recommended to perform a tire alignment check every 10,000 kilometers, and tires should be replaced when the tread depth is below 3mm. During maintenance, pay attention to the production date markings and avoid purchasing products that have been in stock for too long.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What Are the Three Guarantees When Buying a Car?

Three guarantees refer to guarantee for repair, replacement, and refund. 1. Guarantee for repair: During the 'three guarantees' period, any malfunction caused by the quality of the car product will be repaired free of charge after technical appraisal by the 'Technical Service Center' or 'Authorized Maintenance Station'. 2. Guarantee for replacement: During the 'three guarantees' period, if there is a quality issue that cannot be repaired, after appraisal by the 'Center' or 'Authorized Station', qualified parts or assemblies can be replaced free of charge. 3. Guarantee for refund: During the 'three guarantees' period, if a major quality issue occurs and the product still fails to meet the main technical performance indicators after the first two treatments, the user may submit a written request for a refund. After appraisal and confirmation by the 'Center', the dealer can process the car return after collecting depreciation fees based on the usage time and mileage.
20
1
Share

Should You Press the Clutch When Parking and Turning Off the Car?

For manual transmission cars, it is necessary to press the clutch when parking to avoid excessive load on the transmission components, which could cause damage. Below is a detailed introduction about the car clutch: 1. Overview: The car clutch is located inside the flywheel housing between the engine and the transmission. The output shaft of the clutch is the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the engine's power to the transmission. 2. Principle: The driving and driven parts of the clutch transmit torque through friction between contact surfaces, using liquid as a transmission medium, or magnetic transmission (electromagnetic clutch). This allows temporary separation and gradual engagement between the two parts, while permitting mutual rotation during the transmission process.
5
2
Share

Does changing from 18-inch to 19-inch rims have any impact?

Changing from 18-inch to 19-inch rims may reduce the comfort of the vehicle and even cause wear and tear. Below is a detailed introduction about car rims: 1. Overview: The rim (Car-Rim) is the central part of the wheel where the axle is installed, also known as the "wheel rim" or "steel rim." Rims are prone to accumulating dirt, and if not cleaned for a long time, they may corrode or deform, posing safety hazards. 2. Classification: Rims can be divided into steel rims and alloy rims based on material, each with its own advantages and disadvantages. The main advantage of steel rims is their simple manufacturing process (usually produced through casting, whereas aluminum alloy rims are typically made using low-pressure casting), relatively low cost, and strong resistance to metal fatigue.
19
1
Share

How to Distinguish Between Challenger and Hellcat?

Dodge Challenger and Hellcat can be distinguished as follows: 1. Different exterior dimensions: The length*width*height (mm) of the Dodge Challenger is 5022*1924*1450; The length*width*height (mm) of the Dodge Challenger SRT8 (Hellcat) is 5017*1923*1448. 2. Different engines: The Dodge Challenger is equipped with a 3.6L V6 engine; The Dodge Challenger SRT8 is equipped with a 6.2L V8 engine. 3. Different maximum torque: The maximum torque of the Dodge Challenger is (N・m)368/4800; The maximum torque of the Dodge Challenger SRT8 is (N・m)881/4800.
8
5
Share

What is the speed limit for driving across a narrow bridge?

When a motor vehicle passes through a railway crossing, sharp curve, narrow road, or narrow bridge, the maximum driving speed shall not exceed 30 km/h. Below is relevant information: 1. Speed: When driving on the road, motor vehicles shall not exceed the maximum speed indicated by speed limit signs. On road sections without speed limit signs, a safe speed should be maintained. Driving speed should be reduced when driving at night, on dangerous road sections, or under weather conditions such as sandstorms, hail, rain, snow, fog, or icy roads. 2. Slow down: When passing through an intersection, motor vehicles shall proceed according to traffic signals, signs, markings, or the direction of traffic police; when passing through an intersection without traffic signals, signs, markings, or traffic police direction, they should slow down and yield to pedestrians and vehicles with the right of way.
19
5
Share

Why Are Secondary Dealers Cheaper Than 4S Stores?

Secondary dealers' cars are cheaper than 4S stores for the following reasons: 1. Lower operating costs; 2. Price control by 4S stores to ensure their subordinate dealers can sell cars; 3. Some secondary dealers display cars from one 4S store but sell cars from 4S stores in other regions, mainly due to insufficient regional control by manufacturers. The differences between secondary dealers and 4S stores are as follows: 1. Different car sources: 4S stores source cars from manufacturers and general distributors, ensuring high quality; most secondary dealers source cars from 4S stores, and some may sell refurbished or overstocked cars, making quality assurance difficult. 2. Different service types: Secondary dealers mostly only sell cars without services like vehicle insurance, after-sales maintenance, or repairs; 4S stores encompass vehicle sales, spare parts sales, after-sales service, and feedback to manufacturers.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.