What is the tire size of the Buick LaCrosse?

2 Answers
DeAdaline
07/24/25 11:36pm
Buick LaCrosse tire sizes are 235/50r18 and 245/45r19, but only the top trim model uses 245/45r19 tires. 245/45r19 represents a tire width of 245 millimeters, an aspect ratio of 45, 'r' stands for radial tire, and 19 indicates it can be mounted on 19-inch rims. An aspect ratio of 45 means the tire's sidewall height is 45% of the tire's section width. The Buick LaCrosse's body dimensions are 5026mm in length, 1866mm in width, and 1459mm in height, with a wheelbase of 2905mm. The LaCrosse is equipped with advanced intelligent driving assistance technology, offering 11 smart driving assistance features including PD pedestrian detection, LKA lane keeping, ACC adaptive cruise control, and CMB collision mitigation.
Was this review help?
3
3
Share
Cinna
08/10/25 3:27pm
I've been driving a Buick LaCrosse for several years, and the tire size is usually 225/55R17. This standard size ensures a comfortable and stable ride, especially feeling steady on the highway. I remember once when unstable tire pressure affected fuel consumption—a lesson learned. Now, I check the pressure monthly, keeping it around 32 PSI. The tire's aspect ratio of 55% helps absorb shocks and avoids bumps, making it ideal for family trips. If you're changing tires, stick to the same size to ensure compatibility, and avoid arbitrarily upgrading to larger rims. Always watch for wear and tear—safety first. In short, remember the size to avoid trouble.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

What is the tolerance range for h6?

According to national standards, the tolerance grade for internal holes is represented by uppercase letters, specifically 360H6. The tolerance for an internal hole of 360H6 is φ360H6 (+0.036/0), with an upper deviation of +0.036 and a lower deviation of 0. The maximum limit size is φ360.036, the minimum limit size is φ360, and the tolerance zone is 0.036. Additional information: 1. National standards specify that the tolerance grade for external cylindrical shafts is represented by lowercase letters, while internal holes are represented by uppercase letters. This is used to distinguish between the tolerance grades of shafts and holes; 2. For example: What is the tolerance for Φ200-H7/h6? 200 represents the diameter. H7/h6 represents a clearance fit. The uppercase letter H is the fundamental deviation for the hole, 7 is the tolerance grade IT7, the lower deviation for the hole is 0, where h is the fundamental deviation for the shaft, and the upper deviation for the shaft is 0.
19
5
Share

How to Adjust the Audio System in BMW 3 Series?

For BMW 3 Series F30 and F35 models, volume adjustment can be done on the air conditioning panel or the steering wheel. To adjust treble, bass, and tone, navigate to Settings > Tone, or go to External Devices > Tone Adjustment. Below are some relevant details: 1. The audio system used in BMW 3 Series is from Harman Kardon. Maintenance tips for BMW 3 Series audio system: The main unit is significantly affected by weather, particularly the circuit board and plastic components. The parameters of electronic components on the circuit board vary with temperature changes. Therefore, if the car interior temperature is high, it is advisable not to turn the audio volume too high, as this can affect both sound quality and the lifespan of the audio system. Additionally, the core part consists of metal and plastic components combined with a circuit board. 2. Note that external high-power amplifiers are more sensitive to temperature changes and require substantial heat dissipation. During summer, ensure that external amplifiers are well-ventilated. Summer is also a rainy season with high humidity. The audio system components most affected by humidity are the main unit and discs. Always clean discs thoroughly before inserting them, wiping gently from the center outward. Keep car windows rolled up and doors closed to minimize interior humidity. The speaker component most affected by temperature is the cone, which directly impacts sound quality, especially in the mid-to-low frequency range. During such times, it is recommended to recalibrate the audio system.
4
2
Share

What are the dangers of a damaged lower control arm?

Here are the specific consequences that may result from damage to the lower control arm of a car: 1. Breakage of the lower control arm: The wheel will detach from the car body, rendering the vehicle unable to move. 2. Deformation or bending: The positioning relationship between the wheel and the car body is disrupted, causing all four-wheel alignment parameters to fail, which may lead to the vehicle pulling to one side or even the wheel rubbing against the chassis. 3. Aging or failure of the control arm bushing: This can result in metal collision noises when the lower control arm moves. Below is additional information about the lower control arm of a car: 1. The lower control arm is a mechanical tool that, through different linkage configurations, can automatically adjust the camber angle, toe angle, and provide a certain steering angle to the rear wheels when the suspension contracts. 2. The function of the lower control arm is to support the car body and absorb vibrations during driving.
5
3
Share

What is the ground clearance of a typical sedan?

Generally speaking, the minimum ground clearance of a sedan ranges between 110mm and 130mm. For sedans, a larger ground clearance (exceeding 130mm) provides relatively better off-road performance but poorer high-speed stability; conversely, a smaller ground clearance (below 110mm) offers better high-speed stability but poorer off-road capability. If you frequently drive on mountain roads, it is advisable to choose a vehicle with higher ground clearance. If you mainly drive on urban roads or highways, a vehicle with lower ground clearance is sufficient. Additional Information: 1. The lowest ground clearance of most sedans is only about a dozen centimeters, which refers to the distance between the lowest part of the vehicle and the ground (usually near the suspension close to the tires). Other parts of the vehicle are positioned much higher. Therefore, when driving through rough or uneven terrain, it is important to choose your path carefully. Even when passing through low-lying areas, as long as the area near the tires is not at the lowest point of the depression, the chassis will not scrape. 2. The value of the minimum ground clearance has certain limitations and is related to the vehicle's function and aerodynamics. Arbitrarily increasing or decreasing the minimum ground clearance without considering the vehicle type can affect the car's performance and make the overall appearance look uncoordinated and awkward. The ground clearance of a car is not a fixed value; it depends on the load condition. Therefore, determining the ground clearance also depends on the changes in load, and the maximum load variation should be considered when setting the ground clearance.
6
1
Share

How often should the car air conditioning filter be cleaned?

It is recommended to clean the car air conditioning filter once a month. Regular cleaning can extend its service life. Below are the specific steps for cleaning the car air conditioning filter: 1. Purchase an air conditioning cleaner and prepare a cloth. 2. Remove the air conditioning filter. 3. Clean the air conditioning filter. 4. Lower the car windows, turn on the air conditioning, and increase the airflow. 5. Activate the external circulation mode. 6. Turn on the AC switch and let the air conditioning system run for about 10 minutes. 7. Reinstall the air conditioning filter. Note: If the air conditioning is used infrequently and the usage environment is good, as long as the surface of the air filter does not show severe discoloration (grayish-brown), you can remove the air filter and expose it to sunlight for 2 hours.
1
0
Share

What does an exclamation mark on the dashboard mean?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general fault, automatic transmission fault, brake system fault, abnormal tire pressure, and lighting fault. Below is a detailed analysis of these five situations: General Fault: A triangle with an exclamation mark inside indicates that the car's general performance or components and functions have malfunctioned. This mainly includes parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to go to a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal Tire Pressure: An exclamation mark with a horizontal line below the parentheses represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating that a car light has malfunctioned. Solution: Go to a 4S shop for inspection and repair as soon as possible, or you can check it yourself. Focus on commonly used bulbs such as turn signals, fog lights, and interior lighting to see where the problem lies.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.