What is the tire size of the Baojun 530?
1 Answers
The tire size specification of the Baojun 530 is 215/60R17. The first number, 215, represents the tire width of 215MM. The 60 indicates the tire's aspect ratio is 60%, meaning the section height is 60% of the width. The 17 represents the rim diameter of 17 inches, and the letter "R" in the middle denotes a radial tire. The Baojun 530 tires feature a five-petal spoke wheel rim design, with the brand being Atlas ATLAS and the tread pattern Batman A51. The spare tire is non-full size. If you want to replace the tires yourself, you can follow these steps: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the wheel hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire is also marked with the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire, facilitating practical use, such as "Standard rim 5.00F".