What is the tire size of the Audi A3?

What is the normal gap for piston ring ends?

Piston ring end gap is 0.4-0.6mm; side gap is 0.25-0.4mm; back gap is 0.35-0.55mm. Below is an introduction to measuring the three gaps of piston rings: End gap measurement: End gap refers to the gap at the opening when the piston ring is installed in the cylinder, to prevent the piston ring from seizing due to thermal expansion. When checking the piston ring end gap, place the piston ring flat in the cylinder, push it flat with the piston top, and then measure the gap at the opening with a feeler gauge. The first ring has a larger end gap than the other rings because it operates at higher temperatures. Side gap measurement: Side gap refers to the vertical clearance of the piston ring in the ring groove. Excessive side gap affects the sealing function of the piston, while insufficient side gap can cause the piston ring to seize in the groove. To measure, place the piston ring in the groove and use a feeler gauge. Back gap measurement: Back gap refers to the clearance between the back of the piston ring and the bottom of the piston ring groove after the piston is installed in the cylinder. It is generally expressed as the difference between the groove depth and the ring thickness. The back gap of a standard oil ring is relatively large. A common practice is to install the piston ring in the groove; if it sits below the ring land and can rotate freely without any resistance, it is considered suitable.

18

2

Share

Can I go to another 4S store for maintenance?

Cars purchased from different 4S stores can be maintained at any 4S store (as long as the store carries the brand of the car). Daily vehicle maintenance is performed by the driver before, during, and after driving. Before driving, one should inspect the car to check if the lighting devices are damaged, if the body is tilted, if there are any leaks such as oil or water, and examine the condition of the tires, doors, engine hood, trunk lid, and windows. Things to note when going to a 4S store: Pay attention to verifying vehicle information: This mainly includes the vehicle repair unit (driver's name), license plate number, engine number, chassis number, entry time, and exit time (settlement time). The key details are the engine number and chassis number. The driver should carefully verify these numbers with those on the vehicle registration to prevent errors in input by the settlement staff. Otherwise, in case of an accident, there may be no recourse for complaints. Try to reclaim spare parts: The spare parts list details which parts were replaced during the current maintenance, along with the price of each part. The driver should check whether the listed parts exceed the scope of those that needed replacement in the maintenance project. Additionally, one can choose to reclaim the replaced parts whenever possible.

2

4

Share

What's the matter with not being able to pay for traffic violations on 12123?

12123 traffic violation payment requires entering the confirmation payment page instead of the payment page. There may be several reasons for frequent payment failures: 1. System maintenance: Operations cannot be performed. Most software may undergo system maintenance during specific periods. It is recommended to try again later. This traffic management software may have bugs itself and still needs improvement. 2. Network issues: Check if there are network problems. The network may be unstable, and you can try reconnecting to the network. If there is an issue with the phone, you can try restarting it.

5

0

Share

Where to Apply for a Replacement of a Lost Motor Vehicle Document?

If you lose your driver's license, you can apply for a replacement at the vehicle management office where the driver's license was originally issued or at any other vehicle management office outside the original issuing jurisdiction. When applying, you need to fill out an application form and submit the following documents and proofs: the identity proof of the motor vehicle driver; a written statement declaring the loss of the motor vehicle driver's license. After the motor vehicle driver receives the replacement driver's license, the original driver's license becomes invalid and must not be used anymore. Additional information: 1. Driving school registration time: To apply for a motor vehicle driver's license at a driving school, the registration process takes about half an hour to complete. After that, wait for the driving school's notification for a medical examination. Once the medical examination is completed, you can participate in the study for the motor vehicle driver's license subject one. After meeting the required study hours, you can take the exam. Other subjects should be completed in the same order. There is no need to repeat the medical examination within six months. 2. Time to obtain a motor vehicle driver's license: Under normal circumstances, it takes about 45 days to obtain a motor vehicle driver's license, with the maximum time not exceeding three years. This period starts after the completion of the motor vehicle driver's license subject one exam. If the time limit is exceeded, the qualification for the driver's license exam will be canceled, and you will no longer be able to take the exam.

9

2

Share

What is the Difference Between Hybrid and Dual Engine?

Hybrid generally refers to gasoline-electric hybrid vehicles, which are equipped with both a conventional fuel engine and an electric motor. Dual Engine refers to vehicles equipped with two power engines: a fuel engine and an electric motor. The main differences between Hybrid and Dual Engine are as follows: 1. Engine Aspect: Hybrid generally refers to gasoline-electric hybrid vehicles. They feature both a traditional fuel engine and an emerging electric motor, with both operating under optimal conditions to achieve efficient energy utilization. Dual Engine, on the other hand, has two power sources—an engine and an electric motor—equivalent to having two power engines. 2. Power Source Aspect: Hybrid vehicles typically use a conventional internal combustion engine (diesel or gasoline) and an electric motor as power sources. Some engines may be modified to use alternative fuels such as compressed natural gas, propane, or ethanol. Dual Engine vehicles possess both an engine and an electric motor as power sources, significantly enhancing performance while greatly reducing fuel consumption. This technology balances tradition and the future, effectively implementing energy-saving and emission-reduction measures. 3. Driving Mode Aspect: Hybrid vehicles utilize both gasoline and electric driving modes. The advantage is that when starting or stopping, the vehicle relies solely on the electric motor. The engine does not engage until a certain speed is reached, ensuring the engine always operates under optimal conditions, delivering strong performance with very low emissions. Additionally, the electricity is generated by the engine, requiring only refueling. Dual Engine vehicles are powered by the electric motor during startup and low-speed driving, while the engine takes over during high-speed and acceleration phases. During normal deceleration, the vehicle can also recover excess energy and store it in the battery, eliminating the need for external charging.

4

2

Share

Which generation of Aisin is the awf6f25 transmission?

awf6f25 transmission is Aisin's third-generation 6AT transmission, which features mature technology and high reliability. It adopts two sets of planetary gears to reduce fuel consumption during upshifting. The working principle of an AT transmission involves two turbine blades installed in a space filled with hydraulic oil, connected to the power input and output ends respectively. The input turbine generates strong vortices to drive the output turbine, thereby transmitting power. 6AT transmission technical features: mature technology, high reliability. It uses two sets of planetary gears to reduce fuel consumption during upshifting. Equipped with a more intelligent electronic control system, it offers better shift logic, more precise shift timing, ensuring smooth shifting and optimizing the engine's linear power output. It features smooth operation, clear shift logic, and responsive upshifting and downshifting. AT transmission maintenance methods: Regularly check the transmission fluid level: After starting the engine, warm the transmission fluid to around 50°C, then move the gear selector through each position for 2 seconds before placing it in park. The fluid level on the dipstick should be between the maximum and minimum marks. If low, add the same quality fluid promptly. Regularly replace automatic transmission fluid: Most automatic transmissions require fluid changes every two years or 40,000–60,000 km, but it’s recommended to change it 2,000–3,000 km earlier. The exact interval can be found in the owner’s manual. Proper transmission fluid replacement: By 2010, the best method was dynamic fluid replacement using specialized equipment. This circulates the old fluid thoroughly during transmission operation, draining it completely before adding new fluid, achieving a replacement rate of over 90% for optimal results.

10

5

Share

What is the tire size of the Audi A3?

What is the normal gap for piston ring ends?

Can I go to another 4S store for maintenance?

What's the matter with not being able to pay for traffic violations on 12123?

Where to Apply for a Replacement of a Lost Motor Vehicle Document?

What is the Difference Between Hybrid and Dual Engine?

Which generation of Aisin is the awf6f25 transmission?

What is the reason for the Land Rover Freelander 2 not accelerating when stepping on the accelerator?

Why can't music be played after connecting Bluetooth in an old Q5?

What Impact Does Fuel Additive Have on Cars?

What is the fuel tank capacity of the Great Wall Pao Diesel version?