···
Log in / Register

What is the tire size for the Geely Emgrand GL?

4 Answers
DeEverly
07/23/25 3:59pm
The tire size for the Emgrand GL is 205/55-R16, and the spare tire is a non-full-size spare. Emgrand GL tires: These tires effectively reduce vibration and noise during driving. The design of four wide straight groove patterns also facilitates rapid water drainage, ensuring stronger grip on wet surfaces. It is recommended that Emgrand GL owners do not arbitrarily alter the factory-configured parameters, as this could lead to increased tire wear and potential safety hazards. Tire replacement: As a consumable item, tires need to be replaced after a certain period of use. Firstly, every 10,000 kilometers, the front and rear tires should be rotated diagonally. This is because most family cars are front-wheel drive, with the front wheels responsible for both steering and driving the entire vehicle, leading to uneven wear between the front and rear tires. Additionally, tire wear is related to the distribution of the vehicle's weight, and tire rotation greatly helps in achieving even wear. Tires with different specifications, structures, and wear resistance levels can significantly impact the vehicle's handling and stability performance.
Was this review help?
15
4
Share
DiJayden
08/10/25 11:48am
The standard tire model for the Geely Emgrand GL is usually 205/55 R16. I've been driving this car for several years and found this size quite suitable for both city and highway driving, offering high comfort and fuel efficiency. When changing tires, I recommend sticking to the original factory-recommended size to avoid affecting the suspension or acceleration issues. Last time I changed tires, I used the Dunlop brand, which has a long lifespan and remained stable even after 20,000 kilometers. However, it's important to maintain tire pressure around 2.3 bar, as too high or too low can affect braking performance. Regularly check the wear level during maintenance and replace them in time to avoid safety hazards.
Was this review help?
13
1
Share
Expand All
LaNoah
09/22/25 5:49am
The tires on the Emgrand GL are generally sized at 205/55 R16, which I think is a pretty smart choice as a car enthusiast. The 205 represents the tire width in millimeters, 55 is the aspect ratio, and R16 refers to the wheel diameter in inches. This design offers strong grip during turns while maintaining comfort. I've researched other tire brands like Michelin or Pirelli, and switching to them might slightly improve handling but could increase fuel consumption by about 0.5. Remember to adjust your tires according to the season—using snow tires in winter is safer.
Was this review help?
13
0
Share
Expand All
JudeAnn
11/05/25 9:09am
I've used the Emgrand GL, which typically comes with 205/55 R16 tire size as standard. This standard configuration is reliable. When replacing, opt for reputable brands like Goodyear for a quiet and durable ride. It's recommended to check the tread depth every 10,000 kilometers.
Was this review help?
1
5
Share
Expand All
More Forum Discussions

Is it okay if the car scraped the chassis?

If the car scraped the chassis without any fluid leakage or mechanical deformation, it should be fine. The function of the chassis is to support and install the car engine and its various components and assemblies, forming the body shape, receiving the power from the engine to make the car move and maintain normal driving. The composition of the car chassis: it consists of the transmission system, steering system, driving system, and braking system. The maintenance methods for the car chassis are: 1. Check the oil condition of each important assembly in time; 2. Pay attention to the wear of brake pads and clutch plates; 3. Regularly perform four-wheel alignment; 4. Pay attention to the tire pressure and wear condition.
8
5
Share

How to Replace a Faulty Spark Plug?

To replace a faulty spark plug, follow these steps: 1. Wait for the engine to cool completely, open the hood, unplug the high-voltage pack connector, and remove the fixing bolts; 2. Use a socket wrench to loosen the nuts by turning counterclockwise; 3. Use a magnetic rod to extract the spark plug; 4. Attach the new spark plug to the magnetic rod and insert it into the hole; 5. Reassemble by following the above steps in reverse order; 6. Start the engine to check if the spark plug is functioning properly. The reasons for a faulty spark plug include: 1. Insufficient spark energy during ignition; 2. Excessive air-fuel ratio in the fuel mixture; 3. Overheating of the engine; 4. Dirty air filter; 5. Excessive idle speed; 6. Severe carbon buildup and use of low-quality gasoline; 7. Damaged valve oil seal or crankcase ventilation valve.
4
4
Share

Why is it difficult to engage reverse gear in a manual transmission?

The reasons why it is difficult to engage reverse gear in a manual transmission are: 1. The gear is not engaged and is in neutral; 2. The gear switch of the transmission is faulty; 3. The clutch is not fully depressed; 4. The synchronizer is not installed, causing the teeth to misalign with the gear; 5. The handbrake is not released, leaving the car in manual braking state. The steps to start a manual transmission car are: 1. After starting the car, press the clutch pedal all the way down with your left foot to completely disengage the clutch; 2. Shift the transmission into first gear; 3. Press or lift the electronic handbrake button; 4. Ensure safety by observing the road and other vehicles or pedestrians; 5. Continue to hold the clutch pedal with your left foot to keep the clutch disengaged, press the accelerator pedal with your right foot, and slowly release the clutch pedal with your left foot.
14
5
Share

What is the Volkswagen Teramont 330TSI?

Volkswagen Teramont 330TSI is the Volkswagen Touareg 330TSI model. Here are the specific details about the Volkswagen Touareg: 1. Powertrain: The Touareg is equipped with three powertrain options, including a 2.0T high/low-power version and a 2.5T V6 engine. The Touareg 330TSI model features a 2.0T engine with a maximum power output of 186 horsepower and a maximum torque of 320 Nm, paired with a 7-speed dual-clutch transmission. The power of the 330TSI model can meet the basic needs of daily driving. 2. Features: The vehicle comes with a multimedia information display that supports the App-Connect smartphone integration platform, compatible with Apple CarPlay and Android Auto. It also includes adaptive cruise control, lane keeping assist, blind spot monitoring, collision warning, heated steering wheel, front seat heating/ventilation, and a panoramic sunroof.
19
3
Share

What Causes the Jerking Sensation When Releasing the Clutch After Shifting Gears?

The reasons for experiencing a jerking sensation when releasing the clutch after shifting gears are: 1. Jerking during upshifting: The transmission's response speed is not fast enough, and the upshift speed cannot keep up with the driver's throttle input, resulting in a jerking sensation during gear changes. 2. Jerking during downshifting: When the driver releases the accelerator pedal or presses the brake pedal, the alternator starts working, placing a load on the engine and causing a mismatch between the engine speed and the clutch disc speed, leading to a jerking sensation. The working principle of the clutch is: 1. The torque generated by the engine is transmitted to the driven disc through the friction between the flywheel, pressure plate, and the contact surface of the driven disc. 2. When the driver depresses the clutch pedal, the diaphragm spring's large end moves the pressure plate backward through mechanical linkage, separating the driven components from the driving components.
20
4
Share

How to Turn Off a Motorcycle Alarm?

There are several methods to turn off a motorcycle alarm: you can directly use the key to turn on the power switch, which will deactivate the alarm state. When the key is not available, simply unplug the power connector and then plug it back in to deactivate the alarm state. Below is additional information about power locks: 1. By voltage: Power locks can be categorized into low-voltage power locks and high-voltage power locks based on voltage levels. Low-voltage power locks are mainly used in small appliances, electric toys, and electric vehicles. High-voltage power locks are primarily used in machine tools, elevators, etc. 2. By the number of controlled circuits: Power locks can be divided into single-circuit power locks, dual-circuit power locks, and multi-circuit power locks. A single-circuit power lock can only control one circuit. A dual-circuit power lock can simultaneously control two circuits.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.