What is the tire pressure for winter snow tires?

1 Answers
DiEdward
07/30/25 8:47am
Winter snow tires typically have a standard tire pressure ranging from 2.2 to 2.5 bar. Compared to regular tires, snow tires are designed with special compounds to increase traction on snow and ice-covered roads, and their tread material is softer. Here are some relevant details: Generally, it is advisable to maintain the tire pressure at the lower limit of the standard range for your car's tires. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent blowouts due to high temperatures. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: standard tires should be between 2.4-2.5 bar; reinforced tires between 2.8-2.9 bar; the maximum tire pressure should not exceed 3.5 bar. Tire pressure anomalies: Generally, a pressure below 1.8 bar or above 3.0 bar will trigger an alert. In such cases, it is necessary to inspect the tires and adjust the pressure accordingly.
Was this review help?
2
3
Share
More Forum Discussions

How many true or false questions are there in Subject 1?

There are a total of 40 true or false questions in Subject 1. Below is the extended content: 1. The Subject 1 exam consists of 100 questions in total, with two types of questions: multiple-choice and true or false. Each question is worth 1 point, totaling 100 points, and a passing score is 90. 2. Subject 1 refers to the theoretical driving test, conducted at the vehicle management office, which all driver's license applicants must pass. The exam content includes the most basic knowledge such as driving theory fundamentals, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the theoretical driving test is arranged by the local vehicle management offices. 3. Subject 1 is part of the teaching and examination outline for motor vehicle driver training. The examination section of this outline is divided into three subjects, organized by the traffic management department of the public security authority. The examination sequence proceeds in the order of Subject 1, Subject 2, and Subject 3. After passing the previous subject, the applicant can proceed to the next subject; if the previous subject is not passed, the applicant must continue to take that subject's exam.
14
2
Share

Does Three-Way Catalytic Converter Cleaner Damage Cars?

Three-way catalytic converter cleaner does not damage cars, but using inferior quality cleaners can cause harm. Poor-quality cleaners may damage the fuel supply system, leading to insufficient fuel supply to the vehicle's engine and causing abnormal engine operation. Below is an extended introduction: Introduction to the Three-Way Catalytic Converter: The three-way catalytic converter is an important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. It features stable performance, reliable quality, and a long lifespan.
6
0
Share

What are the methods for removing paint from a car body?

Here is a detailed introduction to the methods for handling paint on a car body: 1. Banana oil: Dip a towel in banana oil and gently wipe the paint spots. It can be used to dilute the paint and is very effective in cleaning paint spots. However, banana oil is toxic, volatile, and somewhat corrosive, which can damage the car paint, so extra caution is required when using it. 2. Alcohol: Paint can be removed by wiping with alcohol (industrial alcohol). Use a soft cotton cloth dipped in alcohol and gently wipe the paint. 3. Tar remover/paint thinner: Tar remover can also dissolve paint. Spray it evenly on the paint spots and wait for a while to allow the paint spots to soften and dissolve.
12
5
Share

Is the BMW 5 Series a C-Class Car?

The BMW 5 Series is a C-Class car. Below is a relevant introduction to the BMW 5 Series: 1. Powertrain: The powertrain of the BMW 5 Series has been further enhanced. The top version, the 545i, is equipped with a V8 engine from the 7 Series, delivering a maximum power of 245 kW/333 hp (at 6100 rpm) and a maximum torque of 450 Nm (at 3600 rpm). It has a top speed of 250 km/h and can accelerate from 0 to 100 km/h in just 5.9 seconds. 2. Body Dimensions: The BMW 5 Series is the most advanced luxury sedan produced domestically to date. The exterior dimensions of the new-generation BMW 5 Series are 4841×1846×1468 (mm), with a wheelbase of 2888 mm. The new 5 Series is 66 mm longer than the previous generation model.
11
5
Share

What are the symptoms of a faulty car evaporator sensor?

When the evaporator temperature sensor is damaged or fails, it prevents the refrigeration system from maintaining normal temperature control. Car evaporator sensor overview: 1. Working principle of evaporator temperature sensor: After turning on the air conditioning, the evaporator continuously cools. When the temperature reaches the set value, it sends a signal to stop the compressor. If it keeps sending signals to the compressor, the compressor will work continuously. The sensor disconnects the compressor circuit when the temperature meets requirements and reconnects it when temperature rises above a certain threshold. 2. Function of evaporator sensor: It protects the air conditioning system by preventing frost formation on the evaporator surface which would reduce heat exchange efficiency. Typically, when the evaporator surface temperature reaches 2-4°C (considered frost-forming temperature), it sends feedback to the AC switch to control circuit operation. While high/low pressure switch signals are sent to the vehicle ECU for compressor control, both mechanisms serve to protect the car's air conditioning system.
10
3
Share

What is the triangular filled area marking?

Triangle filled area is a diversion line, which serves as a lane entrance and exit marking. Below is an extended introduction: 1. Introduction to diversion lines: Diversion lines are white in color and function to guide and divert traffic flow. When connected to the road centerline, they may also be yellow. The marking forms can be divided into three types: single solid line, V-shaped line, and diagonal stripe line. Vehicles at intersections must follow the designated route and are not allowed to drive over or cross the lines. 2. Angle and width settings: The internal filling markings intersect at a 45-degree angle, with the junction generally centered at the road intersection, though actual conditions may vary. Marking width: The outer width is 15 or 20 cm (same as the edge solid line), while the inner width is 40 or 45 cm.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.