What is the tire pressure for the XRV?

2 Answers
MacEmersyn
07/28/25 11:18pm
The normal tire pressure for the Honda XRV is between 2.4 and 2.5 bar. Due to seasonal factors, the tire pressure can be increased by 0.2 bar in winter and decreased by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The tire pressure monitoring for the Honda XRV can be viewed on the central control screen in the instrument panel. By installing four tire pressure monitoring sensors inside the tires, the system automatically monitors the tire pressure and temperature in real-time while the vehicle is stationary or in motion. It provides timely alerts for high pressure, low pressure, and high temperature to prevent traffic accidents caused by tire failures, ensuring driving safety. Generally, a tire pressure above 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced friction and adhesion of the tires, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; weakens the function of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction with the ground, rapidly increasing tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically triggers an alarm when below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system retains the previous data, causing the indicator light to stay on. Simply resetting the tire pressure will resolve this issue. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. The only solution for a damaged sensor is to replace it with a new one.
Was this review help?
20
4
Share
VanMackenzie
08/12/25 3:41am
I remember the standard tire pressure for the XRV is usually between 2.2 and 2.5 bar, depending on the manufacturer's sticker on the door frame or fuel cap. When driving on the highway in summer, it's better to lower the pressure by 0.1 to 0.2 bar to avoid overheating and potential tire bursts. During my last maintenance visit to the 4S shop, the technician specifically reminded me that tire pressure shouldn’t be adjusted based solely on the season—it also needs to be increased when carrying heavy loads. For a full load, the pressure should be at least 2.4 bar or higher. By the way, measuring cold tires gives the most accurate reading; you should wait three hours after driving before checking. I’ve gotten into the habit of using a mechanical tire pressure gauge monthly—it’s more reliable than digital ones—and I always check for nails or punctures while I’m at it.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

How to Reset the Tire Pressure Light on an Older BMW X5?

After adjusting the tire pressure, start the car and navigate to the maintenance interface in the I-Drive system, then press the second option. The screen will prompt: Please ensure the vehicle's engine is running and the car is stationary. Wait patiently for several tens of seconds, and the tire pressure light will be reset.
20
5
Share

How to Adjust the Headrest on an Older BMW 5 Series?

Sit in the car and lean back slightly to find a comfortable seating position. Using the adjustment button, align the softest part of the headrest to the back of your head, ensuring it is level with your head. Press the button located next to the two support rods of the seat headrest or on the side of the headrest to adjust the height up or down.
20
4
Share

How to Open the Sunroof on an Older Audi A6?

The panoramic sunroof glass and sunshade can only be operated when the power mode is set to ON. Press the sunroof switch button once to automatically open the sunroof. During automatic opening or closing, a brief press of the switch will stop it at the current position. Pull and hold the switch backward, then release it when the desired position is reached. Push and hold the switch to start moving the sunroof glass, and release it when the appropriate position is achieved.
10
3
Share

How to reset the tire pressure warning on an older BMW X1?

Press the OK button on the left side of the steering wheel and the right button to navigate to the maintenance interface, then press the downward arrow button on the steering wheel to access the tire pressure interface. Wait until the instrument panel displays the message 'Run-flat indicator activated', then press the OK button on the steering wheel to confirm. The instrument panel will indicate whether the tire pressure is normal. Press the arrow button to select 'Yes' and then press the OK button to confirm.
7
2
Share

How to connect Bluetooth in an old Audi A5?

First, enable the Bluetooth function on both your mobile phone and the car's Bluetooth device. Then, set your phone's Bluetooth to "Visible to All" or to a mode where it can be detected. Search for Bluetooth devices on your phone and select the appropriate one to pair and connect. Enter the dedicated passcode to complete the connection. If the Bluetooth has been paired before, the system will automatically reconnect the Bluetooth when it is turned on again. Once the pairing is completed, the Bluetooth connection will be successfully established.
12
5
Share

How to set the time on the dashboard of an older smart car?

The dashboard has a time reset button on the right side, located on the small raised knob on the dial. Press it briefly to switch between time and mileage. When the time is displayed, press and hold for 3 seconds. Wait until the hour display flashes, then press briefly to adjust the hour. Press and hold for 3 seconds again, and the minute display will flash. Press briefly to adjust the minutes. Press and hold for 3 seconds once more or do nothing to return to normal time display.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.