What is the tire pressure for the Geely Emgrand GS?

2 Answers
MacJasmine
07/24/25 1:10pm
The tire pressure for the Geely Emgrand GS is between 2.1 and 2.2 bar, with the normal tire pressure range being between 2.1 and 2.3 bar. Taking the 2020 Geely Emgrand GS as an example, it belongs to the compact SUV category, with body dimensions of: length 4440mm, width 1833mm, height 1573mm, a wheelbase of 2700mm, a fuel tank capacity of 55 liters, and a curb weight of 1365kg. The 2020 Geely Emgrand GS features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 141 PS, a maximum power of 104 kW, and a maximum torque of 235 Nm, paired with a 6-speed manual transmission.
Was this review help?
6
1
Share
Lester
08/11/25 7:15am
I've been driving this Geely Emgrand GS for several years, and tire pressure is something you can't take lightly. The standard tire pressure is usually around 2.3 bar, and you can find the exact value on the sticker on the driver's side door frame. I make it a habit to check with a digital tire pressure gauge once a month—if it's too high, say over 2.5 bar, the tires become as hard as rocks, making bumps too harsh and damaging the suspension; if it's too low, like below 2.0 bar, fuel consumption can increase by 10%, and the tires are prone to deformation and wear out faster. In summer, when temperatures soar, I slightly reduce it to 2.2 bar to prevent expansion and blowouts, while in winter when cold winds hit, I adjust it to 2.4 bar to ensure better grip. I remember once on the highway when the tire pressure dropped to 1.8 bar and nearly caused trouble—since then, I always check it when refueling, safety first! Developing a habit of regular checks can also extend tire life, saving you money and fuel.
Was this review help?
18
5
Share
Expand All
More Forum Discussions

What Causes Abnormal Noises When Braking a Car?

Abnormal noises during car braking can be caused by various reasons such as new brake pads in the break-in period, metal particles in the brake pads, excessive wear of brake discs and pads, or warped brake discs. Brake noise issues can occur at any time, and understanding the causes can help better diagnose faults and enhance safe driving awareness. Here are some relevant details: 1. New Brake Pads: New cars or recently replaced brake pads may produce similar noises when braking. New brake pads and discs require a break-in period, and such noises are entirely normal during this time. However, if the noise persists after prolonged use, it may indicate a problem. 2. Metal Particles in Brake Pads: Factory-installed brake pads often use semi-metallic or non-full metallic materials. As these materials wear down, unevenly distributed high-hardness metal particles may appear. These particles can cause noise when they come into contact with the brake disc. Such particles can also negatively affect the brake disc. Replacing the brake pads with higher-quality ones can immediately resolve the issue. 3. Excessive Wear of Brake Discs and Pads: Brake discs and pads are high-wear components that experience friction every time the brakes are applied. Over time, they naturally wear out, and excessive wear can lead to abnormal noises. Regular inspection and replacement are essential. Typically, brake pads should be replaced every 60,000 to 80,000 kilometers, while brake discs should be replaced every 100,000 to 120,000 kilometers. 4. Warped Brake Discs: Warped brake discs are another common cause of brake noise. Determining if the brake disc is warped is straightforward: if the car produces abnormal noises and vibrations when braking, it is likely due to a warped brake disc.
12
0
Share

What is a DSP in cars?

Car DSP is an audio processor, specifically a sound enhancement processor, designed to enhance special sound effects such as surround stereo and perform certain modifications to audio signals. Compared to ordinary amplifiers, car DSPs significantly outperform in many ways. While possessing all the functions of other amplifiers, DSP amplifiers can also attenuate overlapping frequencies caused by the in-car environment. Below are the main features generally found in DSP processors: 1. Separate program and data spaces, allowing simultaneous access to instructions and data. 2. On-chip fast RAM, typically accessible via independent data buses in two blocks simultaneously. 3. Hardware support for low-overhead or no-overhead loops and jumps. 4. Fast interrupt handling and hardware I/O support.
15
0
Share

How to Set Up a Dash Cam?

The setup method for a dash cam is as follows: 1. Insert the memory card, press and hold the power button to turn it on or off; 2. Set the video recording parameters, it is recommended to choose 2 minutes per segment as it is more suitable; 3. Set up motion detection, it is not recommended to enable this during driving due to sensitivity and algorithm issues which may cause extensive frame loss. However, it can be enabled during long-term parking to reduce power consumption and extend battery life; 4. Set the G-sensor, generally set it to medium or high to avoid detection during sudden braking, or simply turn it off and manually save the footage in case of a collision; 5. Set the delayed shutdown, after the car is turned off, the dash cam will continue recording for a period before shutting down. It can usually be set to turn off immediately or after 10 seconds.
2
2
Share

Where to Apply for a Driver's License Renewal?

Driver's license renewal is handled by the vehicle management office at the place of household registration. The process is as follows: Prepare materials ("Motor Vehicle Driver's License Application Form," a copy of the applicant's identity document, the original copy of the applicant's motor vehicle driver's license); Review materials and pay fees (after the materials meet the requirements, proceed with the application and payment); Receive the driver's license. The required materials for driver's license renewal are as follows: 1. "Motor Vehicle Driver's License Application Form," obtainable at the local vehicle management office where the application is submitted. 2. A copy of the applicant's identity document. The copy should be in A4 size, and for second-generation resident ID cards and temporary residence permits, both sides must be copied. 3. The original copy of the applicant's motor vehicle driver's license. 4. The original copy of the "Motor Vehicle Driver Physical Condition Certificate."
3
5
Share

Why does the car stall shortly after starting?

The reasons why the car stalls shortly after starting are: 1. The installed anti-theft system is not deactivated; 2. The throttle is too dirty or the intake valve has excessive carbon deposits; 3. Issues with the ignition system or ignition coil; 4. Insufficient fuel in the tank or low fuel pump pressure; 5. One or more clogged fuel injectors; 6. Leaking ignition wires; 7. Engine malfunction. Vehicle starting steps: 1. Adjust the seat properly after getting in the car; 2. Start the engine; 3. Press the clutch pedal all the way down; 4. Shift into first gear and release the parking brake lever; 5. Release the clutch; 6. Press the accelerator and release the clutch smoothly to start the car steadily.
15
0
Share

How long after passing Subject 3 can you take Subject 4?

You can schedule Subject 4 one week after passing Subject 3, or around 15 days at the latest. More relevant information is as follows: 1. Many students are not very familiar with road markings and signs during the Subject 4 test. The Subject 4 exam includes scenarios such as encountering a red light ahead, pedestrians ahead, students ahead, buses ahead, bicycles ahead, no parking on the roadside, no picking up or dropping off passengers on the roadside, slowing down when approaching a crosswalk, and being cautious when encountering wild animals. 2. A driver's license, also known as a driving permit, is a document issued by the government transportation department to individuals who qualify to drive, usually in the form of a card. To obtain a driver's license, you must meet the minimum age requirement and pass the driving test.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.