What is the tire pressure for the front and rear tires of the Octavia?

2 Answers
VanJohnny
07/24/25 2:36am
The tire pressure for the front and rear tires of the Octavia is 2.4-2.5 bar. For specific values, please refer to the tire pressure label at the bottom of the B-pillar on the driver's side. According to the international GBT2978-2008 standard, the standard tire pressure is 2.4-2.5 bar for standard tires and 2.8-2.9 bar for reinforced tires. The maximum pressure should not exceed 3.5 bar. In winter, the tire pressure should be adjusted slightly higher by about 0.2 bar based on the standard tire pressure. In summer, the tire pressure can generally be set to the lower limit of the standard tire pressure, such as 2.4 bar for standard tires. If the car is often parked outdoors, the tire pressure can be slightly lower than the standard by about 0.1 bar to prevent tire blowouts due to high temperatures. When the tire pressure is too high, the friction and adhesion of the tire will decrease, affecting braking performance. It will also accelerate wear on the central tread of the tire, reducing its lifespan. Additionally, the tire's resistance to punctures will decrease, making it easier for sharp objects like nails or glass to penetrate the tire, leading to internal cracks or blowouts. Conversely, when the tire pressure is too low, the friction coefficient between the tire and the road increases, leading to higher fuel consumption. The friction between the tire and the ground multiplies, causing the tire temperature to rise sharply, softening the tire and drastically reducing its strength. This can result in a blowout, especially during high-speed driving.
Was this review help?
6
3
Share
AllisonDella
08/10/25 10:13pm
I've been driving an Octavia for several years and noticed the tire pressure does differ between the front and rear. This is mainly because the engine at the front makes it heavier, so the standard pressure for the front tires is usually around 2.3 bar, while the rear tires are about 2.2 bar. However, I always recommend beginners to first check the owner's manual or the label on the driver's side door frame, as it specifies the exact recommendations to avoid guesswork. Too low tire pressure can cause uneven tire wear and increase fuel consumption, while too high pressure reduces grip and affects safety. I use a small tire pressure gauge to check every month, remembering to measure when the car is cold in the morning for the most accurate reading. In winter, I slightly increase the pressure to around 2.4 bar to prevent freezing, and return to the standard values in summer. These habits help the car drive more steadily and improve braking response.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

How to Cancel the Maintenance Reminder on Changan?

Methods to eliminate the maintenance reminder on Changan vehicles: 1. Click the "Vehicle Settings" icon on the multimedia controller's home page interface to enter the vehicle settings interface; 2. Under "Maintenance," click to set the maintenance reminder on or off, the number of months for the maintenance cycle, and the mileage, then click the reset button to restore the default cycle values. Taking the Changan Yuexiang V3 as an example: It is a classic sedan launched by Changan Automobile, featuring a dynamic appearance, ultra-low fuel consumption, efficient power, full-body safety equipment, and a rich array of value-added configurations, bringing a new level of superior comfort and quality enjoyment to the entry-level family car market.
16
2
Share

What does AOFF mean in a car?

AOFF in a car refers to the Auto Start-Stop switch, which controls the engine's automatic start-stop function. The Auto Start-Stop system automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts it when it's time to move forward again. When this function is enabled, simply pressing the brake pedal while driving will cause the engine to automatically shut off after the vehicle comes to a complete stop for about two seconds. The engine remains off as long as the brake pedal is held down. Releasing the brake or turning the steering wheel will immediately restart the engine, allowing the car to be driven by pressing the accelerator pedal.
8
4
Share

Is the Tiguan a FAW-Volkswagen model?

The Tiguan is not a FAW-Volkswagen model, but rather a compact SUV under SAIC Volkswagen. It has body dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, with a wheelbase of 2684mm. This vehicle is available in four trim levels (Urban, Trendline, Comfortline, and Highline) with a total of seven variants, equipped with either 1.8TSI or 2.0TSI engines paired with a 6-speed manual transmission or Aisin 6-speed automatic transmission. The Tiguan comes standard with ESP stability control system, EBD electronic brake-force distribution, ASR traction control, front dual airbags, and front side airbags to ensure passenger safety.
13
0
Share

How to Deal with Dried Cement Splashed on the Car Body?

Methods for handling dried cement splashed on the car body: 1. Purchase acidic water (hydrochloric acid) from a pharmacy, dip a brush into it, and apply it to the areas with cement. Since cement is alkaline, the acidic water can gradually dissolve it, followed by rinsing with clean water. White vinegar also has a certain effect; 2. Spray gasoline onto the car paint to soften the cement. Once softened, manually remove it and then clean with car wash liquid; 3. Use a hair dryer to heat the hardened cement. Due to the different thermal expansion rates of cement and the car body, the cement will automatically fall off when heated to a certain extent, after which it can be rinsed clean.
19
0
Share

Is it necessary to apply film on the front windshield?

It is not necessary to apply film on the front windshield unless the windshield has sustained certain damages or cracks. In such cases, applying film does serve a purpose. If the windshield cracks, the car window film can act as an adhesive, holding the shattered glass together and reducing the extent of injuries. However, under normal circumstances, a car would not continue to be driven with a damaged windshield. Potential hazards of applying film: It may obstruct the driver's view and cause reflections on the car body, affecting the visibility of vehicles behind and increasing the likelihood of rear-end collisions. If a metallic film is applied, it may easily block ETC and GPS signals and cause issues like high reflectivity.
4
0
Share

What is AIRBAG car?

AIRBAG is not a car brand, but an airbag. Generally, models equipped with steering wheel airbags will have the AIRBAG logo. Areas marked with SRS or AIRBAG inside the vehicle indicate where the folded airbags are stored. The protection principle of airbags is: when a vehicle experiences certain collision forces, the airbag system triggers a chemical reaction similar to a small explosive detonation. The hidden airbags in the vehicle instantly inflate and deploy, cushioning occupants before their bodies collide with interior equipment, thereby reducing impact forces and minimizing occupant injuries.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.