What is the tire pressure for the Arrizo 5?

1 Answers
AriannaAnn
07/30/25 4:28am
The standard tire pressure for the Arrizo 5 is 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; maximum pressure: should not exceed 3.5 bar. Hazards of overinflation: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overextends tire cords, reducing elasticity and increasing load during driving; Decreases puncture resistance. Sharp objects like nails or glass can easily penetrate, causing internal cracks or blowouts. What to do if tire pressure is low: If no damage is visible, inflate to normal pressure and reset the tire pressure system; If a puncture is found, drive to a tire shop for repair and reinflation; If pressure drops again without a puncture, it may be due to a leaking wheel rim—check and replace if necessary.
Was this review help?
17
1
Share
More Forum Discussions

How Many Days in Advance Can You Renew Your Driver's License?

You can renew your driver's license up to 90 days in advance. According to relevant regulations, drivers must apply for a license renewal within 90 days before the expiration of their current license. Before renewal, any traffic violation penalties associated with the license must be resolved. Driving with an expired license is considered unlicensed driving. The following are important points to note when renewing your driver's license: Regulations for driver's license renewal: If the license has expired for less than a year, you should promptly visit the vehicle management office for renewal. If the license has expired for one to three years, you must apply to take the theoretical exam (Subject 1) at the vehicle management office; passing the exam is required to regain the license. If the license has expired for more than three years, it will be revoked, and you will need to retake the entire driving test. Required documents include the original ID card, the current driver's license, and three one-inch white-background photos. Requirements for applying for a delayed renewal: If a driver cannot renew the license within the specified time due to reasons such as military service or being abroad, they may apply for a delayed renewal at the vehicle management office where the license was issued, within the license's validity period. The maximum delay period is three years. It is important to note that drivers are not allowed to operate a motor vehicle during the delay period.
14
1
Share

Does a motorcycle consume more fuel when driven fast or slow?

Motorcycles consume more fuel when driven fast. Fuel consumption per 100 kilometers: Fuel consumption per 100 kilometers refers to the amount of fuel a vehicle consumes when traveling 100 kilometers on the road at a certain speed. It is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle's chassis, converted into speed parameters, and then calculated by driving at specified speeds to determine the theoretical experimental fuel consumption data per 100 kilometers for the model. Road condition fuel consumption: Road condition fuel consumption, also known as multi-condition road cycle fuel consumption, is a fuel indicator calculated based on repeated tests where the vehicle is driven on specified roads at prescribed speeds and times.
15
0
Share

Does Replacing the Half Shaft Have a Significant Impact on the Car?

Replacing the half shaft has no impact on the vehicle. However, failing to repair a damaged half shaft can cause significant harm to the car. Therefore, it is essential to repair or replace a damaged half shaft promptly. Below is an introduction to the half shaft and the reasons for its damage: Introduction to the Half Shaft: The car half shaft, also known as the drive shaft, is the component that transmits torque from the gearbox reducer to the drive wheels. In other words, it transfers the power from the gearbox to the wheels. Each end of the shaft is equipped with a universal joint, commonly referred to as the inner and outer CV joints. Causes of Half Shaft Damage: Half shaft damage typically begins with the rupture of the rubber dust covers on the inner and outer CV joints. This allows road debris and particles to enter the CV joint lubrication surface, while the lubricating grease inside the joint is completely expelled. As a result, the ball surfaces of the inner and outer CV joints experience dry friction and wear out.
8
1
Share

Can You Get the License Plate on the Same Day When Registering a Motorcycle?

Generally, you can complete the motorcycle registration and receive the license plate on the same day. If plate production is required, it usually takes up to 15 days to obtain the plate. Relevant information is as follows: Specific details: Within two days from the date of acceptance, the vehicle management office must confirm the motor vehicle, verify the vehicle identification number imprint, review the submitted documents and certificates, and issue the motor vehicle registration certificate, license plate, driving license, and inspection qualification mark. If the license plate cannot be issued within the specified time due to plate production reasons, the vehicle management office should issue a temporary driving license plate valid for no more than 15 days. Motorcycle registration process: First, take the motorcycle to a testing institution for inspection. If the inspection is passed, the testing institution will issue the "Motor Vehicle Safety Technical Inspection Report." The owner should bring the "Motor Vehicle Safety Technical Inspection Report," purchase invoice, vehicle certificate, owner's ID card, original motorcycle certificate, and other required documents, along with the motorcycle, to the vehicle management office to apply for registration. Submit the relevant materials to the vehicle management office inspector for review. After approval, the vehicle will undergo an inspection, during which photos of the motorcycle will be taken, and the frame number and engine number will be imprinted. Once the vehicle inspection is passed and the motorcycle photos are developed, registration can proceed. The registration staff will input the registration information and prepare to print the acceptance receipt. Once the procedures are completed, you can immediately select a number and receive the license plate, driving license, and vehicle registration certificate. Finally, install the received license plate in the designated position at the rear of the motorcycle.
19
0
Share

Should Engine Oil Be Changed When the Engine is Hot or Cold?

Actually, engine oil can be changed whether the engine is hot or cold, but relatively speaking, it's better to change the oil when the engine is hot. The timing and precautions for changing engine oil are as follows: Timing for oil change: For a new car under normal driving conditions, if synthetic oil is used, the oil can basically be changed every 10,000 kilometers, and some can even extend to 20,000 kilometers. Precautions for oil change: Engine oil is extremely important for engine operation as it is responsible for both lubrication and heat dissipation. Too much oil will increase the rotational resistance of the crankshaft, reduce the engine's output power, and the excess oil may enter the combustion chamber and participate in combustion, causing the vehicle to burn oil, emit blue smoke, and even increase fuel consumption.
1
3
Share

Is it necessary to replace the gasket when changing engine oil?

The gasket is a disposable component and can be damaged after tightening. Therefore, the drain plug gasket should be replaced when changing the engine oil. The introduction and function of the gasket are as follows: Introduction to the gasket: The gasket is the drain plug, and the drain hole is located at the bottom of the oil pan. If it is not replaced regularly, over time it may become stripped, which would necessitate replacing the entire oil pan. Function of the gasket: During engine operation, wear and tear between internal components generates many fine metal particles. However, ordinary oil filters cannot trap these metal shavings, which can be sucked into the oil passages by the oil pump, potentially causing blockages. Therefore, magnetic drain plugs are used. These magnetic drain plugs can attract and collect these metal particles at the bottom of the oil pan, thereby protecting the engine.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.