What is the tire pressure for the 2020 BMW X1 run-flat tires?

1 Answers
VincentDella
07/29/25 8:45pm
The front tire pressure should be between 2.0--2.3, and the rear tire pressure should be between 2.2--2.5. Run-flat tires: "The standard tire pressure is 240kpa-250kpa, while the reinforced tire pressure is 280kpa-290kpa. The tire pressure differs between cold and hot tires, with hot tires having about 20kpa higher pressure than cold tires. The manufacturer's recommended value refers to the cold tire pressure, which is around 230kpa-250kpa when the car is cold. However, the specific tire pressure should be based on the value marked on each vehicle. Pressure adjustment method: According to the principle of thermal expansion and contraction, in summer, the pressure can be adjusted 0.1-0.2 lower than the normal value, and in winter, it can be adjusted 0.1-0.2 higher than the normal value. The normal value here must refer to the car's manual. A reasonable pressure is 70%-80% of the maximum pressure marked on the tire, but the pressure should preferably not exceed the maximum pressure marked on the tire.
Was this review help?
14
5
Share
More Forum Discussions

Do airplanes use diesel or gasoline?

Airplanes use aviation kerosene, not gasoline or diesel. Aircraft fuel has many requirements, such as: appropriate density, good combustibility, ability to achieve complete combustion, minimal carbon deposits, good fluidity at low temperatures, high cleanliness, good oxidation resistance, and stable combustion. The reasons why airplanes use aviation kerosene are as follows: 1. Aviation kerosene: Aviation kerosene has high lubricity, cleanliness, and heat properties, low corrosiveness, and more stable combustion. 2. Gasoline: Gasoline is highly effective, easy to burn, and has low safety. 3. Diesel: Diesel has a higher density, higher viscosity, is prone to freezing, and only very fine nozzles can atomize the fuel, making it unsuitable for aircraft engines.
20
1
Share

How to use the one-key start feature in Audi A3?

Audi A3 one-key start usage method: 1. The one-key start button is located at the lower left corner of the gear lever; 2. Enter the driver's seat, as long as the key is nearby, you can directly press this button to start the engine. The one-key start device is part of the intelligent car system, serving as a simplified startup button mechanism that can also turn off the engine. This device can be retrofitted either at the original key ignition position or as an independent panel modification. The Audi A3 is a sedan product from Audi, developed based on Volkswagen's MQB platform, featuring lightweight design and aluminum materials in its body construction. Regarding body dimensions, the Audi A3 measures 4292mm in length, 1765mm in width, and 1423mm in height.
11
3
Share

How Many Fuel Tanks Does the Edge Have?

The Edge has one fuel tank with a capacity of 69 liters. The fuel tank consists of the tank body and the fuel cap, used for storing gasoline. The number and capacity of fuel tanks vary depending on the vehicle model. Ordinary cars typically have only one gasoline tank, while off-road vehicles often have two. Gasoline is a volatile, flammable hydrocarbon mixture liquid derived from petroleum through fractionation, cracking, or pyrolysis, and it is used as fuel. The Edge is a mid-to-large-sized crossover SUV model built on Ford's global mid-size vehicle platform. In terms of body dimensions, it measures 4878mm in length, 1925mm in width, and 1770mm in height, with a wheelbase of 2850mm.
5
1
Share

What is the difference between a W12 engine and a V12 engine?

W12 engines are smaller in size compared to V12 engines, allowing for more cylinders and a larger displacement. However, V12 engines produce less noise than W12 engines. The W12 is more of a 'long-distance runner,' but under extreme conditions, it tends to be noisier than the V12. Below is an introduction to V-type and W-type engines: V-type engines: Common V-type engines include V6, V8, V10, and V12, but there are also others like V3, V5, and V16. As the name suggests, the cylinders in a V-type engine are arranged in a V-shape, typically at a 90-degree angle, which helps to best counteract operational vibrations and enhance stability. However, angles like 75 degrees and 72 degrees also exist. The advantages of V-type engines include stable operation (especially for V6, V8, and V12) and space efficiency. The disadvantages are their complex structure, which makes maintenance and repairs more challenging, and their higher manufacturing costs. W-type engines: Strictly speaking, W-type engines are a variation of V-type engines. They further divide the cylinders on both sides of the V-type engine into two groups, forming a 'W' shape when viewed from the side, hence the name. Essentially, a W12 engine is made by combining two V6 engines. The advantages of W-type engines include their compact structure, ease of arrangement, and optimization of engine compartment space. The downside is their overly complex structure.
17
0
Share

What engine does the Haval F5 have?

The Haval F5 is equipped with a low-power version and a high-power version of a 1.5-liter turbocharged engine. The low-power version engine has a maximum power of 124 kW and a maximum torque of 285 N·m, while the high-power version engine also delivers a maximum power of 124 kW and a maximum torque of 285 N·m. The Haval F5 is the first model in the Haval F series, positioned as an entry-level compact SUV. In terms of body dimensions, it measures 4470 mm in length, 1857 mm in width, and 1638 mm in height, with a wheelbase of 2680 mm. For the suspension system, the Haval F5 features a MacPherson independent front suspension and a double-wishbone independent rear suspension.
16
5
Share

Which cars have rotary engines?

Cars with rotary engines include: Mazda RX7 and Mazda RX8, but these models have been completely discontinued, and rotary engines are no longer produced due to policies and other reasons. The rotary engine uses a triangular rotor's rotational motion to control compression and exhaust, which is significantly different from the linear motion of traditional reciprocating piston engines. Taking the Mazda RX7 as an example, it is a sports car under Mazda and one of the representative Japanese sports cars. It adopts the standard FR drive configuration of traditional sports cars, equipped with a five-speed manual transmission, and the integrated taillight group at the rear is the recognizable feature of the car.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.