What is the tire model used for the Dongfeng Nissan Qashqai?

1 Answers
DelOmar
07/29/25 3:24pm
Dongfeng Nissan Qashqai uses the tire model 215/60R17, which is a Bridgestone tire. Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground, usually mounted on metal rims. They support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. The Dongfeng Nissan Qashqai is positioned between a compact SUV and a hatchback sedan, with body dimensions of 4315mm in length, 1783mm in width, and 1606mm in height. The Dongfeng Nissan Qashqai has good fuel economy, with a combined fuel consumption of 9L per 100 kilometers under comprehensive road conditions.
Was this review help?
20
0
Share
More Forum Discussions

Will water in the motorcycle exhaust pipe enter the engine?

Water in the exhaust pipe cannot enter the engine. When the engine is off, the valves are closed, and only the exhaust pipe will be filled with water. After starting and driving a few kilometers, the water in the exhaust pipe will be expelled, and any remaining water will evaporate due to the high temperature. Here is more information about motorcycle engines: 1. Concept: A motorcycle engine converts the thermal energy generated by igniting the fuel-air mixture in the cylinder into mechanical energy, which is then transmitted to the rear wheel through the crankshaft and transmission mechanism to provide driving power. 2. Advantages: Motorcycle engines have the advantages of low inertia force, minimal vibration, and low noise.
11
2
Share

Can traffic violations be handled without the vehicle license?

Traffic violations cannot be handled without the vehicle license. According to the "Procedural Regulations for Handling Road Traffic Violations," the violator or vehicle owner must bring the following documents: original "Resident ID Card," original "Motor Vehicle Driving License" (i.e., driver's license), and original "Vehicle License." Here are ways to avoid violations: 1. Familiarize yourself with traffic regulations. 2. Master driving skills to expand your field of vision, avoid distractions, and clearly spot traffic police and speed cameras. 3. Try not to speed; you can also use safety driving systems like GPS for speed alerts. 4. Frequently check maps and familiarize yourself with routes to reduce detours. 5. Develop the habit of checking violation records online to avoid failing the annual vehicle inspection.
20
2
Share

What is the Passing Standard for Subject 2?

Subject 2 has a full score of 100 points, with evaluation criteria set for failure, deductions of 20 points, 10 points, and 5 points. The test is considered passed if the following conditions are met: ① For applicants of large buses, tractors, city buses, medium buses, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required. The test items for small vehicles C1 and C2 include reversing into a garage, parallel parking, stopping and starting on a slope (canceled for C2), turning at a right angle, and driving through curves (commonly known as S-turns), which are the five mandatory test items (some regions have a sixth item: highway toll card collection). The test items for large vehicles A1, A2, A3, B1, and B2 include pile test, stopping and starting on a slope, parallel parking, driving over a single-plank bridge, driving through curves, turning at a right angle, passing through a narrow gate, driving over continuous obstacles, driving on bumpy roads, making a U-turn on a narrow road, as well as simulated highway driving, continuous sharp turns on mountainous roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. Candidates who fail the Subject 2 test on the first attempt are allowed one retest. If the candidate does not take the retest or fails the retest, the current test session is terminated, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of test appointments for Subject 2 and Subject 3 (road driving skills) must not exceed five. If the candidate fails the fifth test appointment, the passing scores of other subjects already taken will be invalidated.
19
2
Share

What is the horsepower of the ZS1100 diesel engine?

The ZS1100 diesel engine generally has a horsepower of 15 and above. Below is relevant information:1. The normal range of oil pressure for diesel engines: The oil pressure of a diesel engine is normally between 3 to 5 pressures, with idle speed at around 1 pressure. It should be noted that the oil pressure of diesel and gasoline engines varies depending on the specific model, so the above data is only an estimate.2. Reasons for abnormal oil pressure in diesel engines: Due to component wear, improper assembly, or other faults, diesel engines may experience low or no oil pressure. Diesel engines usually have a pressure regulating valve to adjust the oil pressure.
8
1
Share

What is the reason for the motorcycle seat not opening?

The reason the motorcycle seat cannot open is that the cable is not properly positioned, and it can be resolved by readjusting it. Here is more information about motorcycle seat locks: 1. Concept: There are various types of motorcycle seat locks, and their installation and opening methods differ. Therefore, when the seat is locked and cannot be opened, the unlocking method also varies. 2. Disassembly: In such cases, it is best to let a repair professional, based on the actual situation, remove the components around the seat lock and then open the seat lock by pulling the seat lock cable or using leverage. If the seat lock or the lock base itself is damaged, it may need to be disassembled or forcibly broken depending on the situation, and then replaced with new parts.
9
2
Share

What are the reasons for the poor braking performance of motorcycle drum brakes?

Motorcycle drum brakes may fail to provide adequate braking for the following reasons: 1. The brake pedal may bend due to a fall or collision, shortening the effective length of the lever arm and reducing the amplification of braking force. 2. Incorrect installation can lead to diminished secondary amplification of braking force. 3. Worn brake shoes can cause the brake cam to rotate at a larger angle, altering the direction of braking force transmission and reducing the lift effect, thereby failing to effectively transfer braking force to the shoes, further weakening braking performance. 4. An uneven surface inside the brake drum can result in insufficient contact area with the brake shoes. 5. Misalignment between the brake shoes and the drum, either due to excessive clearance or improper assembly, can cause eccentricity.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.