What is the tire model specification for the BYD F3?

1 Answers
SarahDella
07/29/25 10:03pm
The tire model specification for the BYD F3 is 195/60R15. Here, 195 indicates the tire width is 195mm, 60 represents the aspect ratio of 60%, R stands for radial tire (steel-belted radial construction), and 15 denotes the wheel diameter of 15 inches. Taking the 2020 BYD F3 as an example, it belongs to the compact car category with body dimensions of 4533mm in length, 1705mm in width, and 1490mm in height, featuring a wheelbase of 2600mm and a fuel tank capacity of 50 liters. This model is equipped with a 1.5L naturally aspirated engine delivering a maximum horsepower of 109PS (80kW), peak torque of 148Nm, and is paired with a 5-speed manual transmission.
Was this review help?
10
1
Share
More Forum Discussions

Does Starting in Third Gear Ruin the Car at Once?

Starting in third gear can damage the car, but doing it occasionally has minimal impact. Below are the specific introductions for each gear in a manual transmission: 1st Gear: Used for normal starts or climbing very steep slopes. The speed is generally around 10 km/h. 2nd Gear: A transitional gear for acceleration after starting or for low-speed driving. The speed is generally around 20 km/h. 3rd Gear: Used when the speed is between 20-40 km/h, commonly used for city driving. 4th Gear: Used when the speed is between 40-60 km/h. 5th Gear: Used when the speed exceeds 60 km/h.
4
3
Share

How often should the Accord fuel filter be replaced?

It is recommended to replace the Accord fuel filter every 5,000 kilometers or every 3 months. If the filter is not replaced when changing the gasoline, the dirty oil and debris inside the filter will remain, which not only quickly contaminates the newly added oil, turning it black and deteriorating, but also reduces its filtering function and even causes it to lose its cleaning capability, leading to early wear and damage of components. The function of the fuel filter is to filter out solid impurities such as iron oxide, dust, harmful particles, and moisture in the gasoline, protecting components like the fuel injectors, cylinder liners, and piston rings, preventing fuel system blockages, reducing wear on engine parts, and ensuring stable engine operation. The Accord is a mid-size car under GAC Honda, with body dimensions of 4,893mm in length, 1,862mm in width, 1,449mm in height, and a wheelbase of 2,830mm.
19
2
Share

How to Properly Use Honda ECON Mode

ECON is a fuel-saving mode. The correct way to use Honda ECON is to activate it when prioritizing fuel efficiency control is needed. Below are detailed explanations about ECON: 1. Principle of the Intelligent Green Energy-saving Assistance System: The ECON intelligent green assistance system improves drivers' bad habits to some extent by controlling throttle valve opening. It also effectively reduces unnecessary fuel consumption caused by sudden acceleration. Additionally, it adjusts the air conditioning to an energy-saving state, thereby decreasing engine energy consumption. 2. Function of ECON Mode: When ECO mode is activated, the vehicle automatically matches the optimal gear and RPM to reduce fuel consumption. However, while ECON mode is functioning, drivers need to actively control the throttle during driving to achieve ideal fuel efficiency.
9
5
Share

What are the symptoms of camshaft wear?

The symptoms of camshaft wear include increased engine noise, disruption of the valve opening pattern, reduced valve lift, and shortened valve opening and closing overlap time. This affects the accuracy of the valve timing, leading to insufficient air intake and incomplete exhaust emission. It also makes it difficult to adjust the clearance between the valve stem end and the tappet, resulting in reduced vehicle power. The camshaft is the main driving component in the valve train, used to control the timing of the exhaust valve's opening and closing and to drive other accessories such as the fuel pump, oil pump, and distributor. The camshaft can be positioned in three ways: lower-mounted, mid-mounted, and upper-mounted. In a lower-mounted valve train, the camshaft is located in the crankcase; in a mid-mounted valve train, it is located in the upper part of the engine block; and in an upper-mounted valve train, it is located on the cylinder head.
6
2
Share

What are the reasons for the rapid flashing of the Buick Excelle's turn signals?

The reasons for the rapid flashing of the Buick Excelle's turn signals include a damaged flasher relay, poor bulb contact, a broken bulb filament, or a bulb with excessive power. Below are the relevant explanations: 1. Damaged flasher relay The rapid flashing of the Buick Excelle's turn signals may be due to a damaged flasher relay, which needs to be replaced. 2. Poor bulb contact Once poor contact occurs, it naturally leads to rapid flashing. 3. Broken bulb filament It may be because the bulb filament is broken. After a certain period of use, aging is normal, causing the turn signals to malfunction. 4. Bulb with excessive power It may be because the bulb power does not match the vehicle's original flasher relay, leading to abnormal conditions. Excessive power will cause rapid flashing, while insufficient power can easily result in slower flashing frequency or even complete failure to light up.
10
2
Share

What is the solution for frozen auto-folding mirrors?

The solutions for frozen auto-folding mirrors are: 1. Use warm water to thaw the ice on the mirrors; 2. For mirrors with electric heating, preheating the mirrors can help; 3. Use a hairdryer to melt the ice on the mirrors. The function of rearview mirrors: They reflect the conditions behind, beside, and below the car, allowing the driver to indirectly see these areas, expanding the driver's field of vision, and enhancing safety during reversing and driving. The adjustment methods for rearview mirrors are: 1. For the left exterior mirror, adjust the horizon reflection to the center of the mirror and position the reflection of the left side of the car to occupy one-fourth of the right side of the mirror; 2. For the right exterior mirror, adjust the horizon reflection to two-thirds of the mirror's height and position the reflection of the right side of the car to occupy one-fourth of the left side of the mirror.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.