···
Log in / Register

What is the tire model specification for the Accord?

4 Answers
CatherineLynn
07/29/25 5:37pm

The tire model specification for the Accord is 225/50R17, manufactured by Michelin. This tire features high levels of quietness and comfort, with a durable and aesthetically pleasing design. It helps owners save on fuel costs, enjoy a quiet ride, and increase driving mileage. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance. The Accord is a mid-size sedan developed by Honda Motor Co., Ltd., with dimensions of 4893mm in length, 1862mm in width, and 1449mm in height, and a wheelbase of 2830mm. It is equipped with a front double-wishbone and rear 5-link double-wishbone independent suspension.

Was this review help?
11
3
Share
VonBrody
08/14/25 8:54am

When I first bought my car, I researched the tires for the Accord. The common size is 215/55R17, but it varies depending on the model year. For example, older models might have 215/60R16. Having driven several generations of the Accord, this size pairs well with the chassis design, providing stability during high-speed cornering without feeling floaty, and offering better shock absorption on bumpy roads. Tire size affects daily driving comfort—too wide and the noise increases, too narrow and the ride becomes harsher, not to mention the impact on fuel efficiency. I recommend checking the small sticker on the edge of your car door to confirm the manufacturer-recommended size. Avoid randomly changing the specifications to prevent damage to the suspension or braking system. When replacing tires, prioritize those that match the original factory specs. For brands, you can opt for comfort-focused ones like Goodyear for noise reduction, or performance-oriented ones like Michelin for better grip, though they may slightly increase fuel consumption. Also, remember to check tire pressure monthly, maintaining it at 2.3-2.5 bar to extend tire life, save on repair costs, and significantly enhance safety.

Was this review help?
17
4
Share
Expand All
DelGrace
10/13/25 8:02am

Over the years of driving, I've encountered many Accord tire issues, with the standard model 225/50R17 being the most common, but each vehicle differs—check the door frame label. Those numbers on the tire: 225 is the width in millimeters, 50 indicates the aspect ratio, R stands for the construction type, and 17 is the rim size in inches. Incorrect sizing can affect speedometer accuracy and increase the risk of suspension contact. Driving experience depends on proper size matching; good tires reduce bumps, lower noise, and impact long-term fuel consumption. I often remind owners to stick to original specifications when replacing tires and not to save money by buying non-standard products. If the tread wears below 1.6 mm, it must be replaced to prevent blowouts. Safety comes first—tire condition directly affects braking distance, especially crucial in rain or snow. Regular maintenance at professional shops, checking circuits and fuses along with tire pressure monitors, ensures peace of mind without spending much.

Was this review help?
8
4
Share
Expand All
ElijahLee
11/27/25 2:13am

As a beginner, I didn't understand tires. The Accord model usually comes with 215/55R17 size, which can be specifically checked on the sticker inside the car door frame. Simply put, the numbers represent width, height, and wheel size. The original factory size ensures a smooth and fuel-efficient ride. Choosing the right tires makes driving safer and more comfortable. Don't modify them yourself; opt for compatible brands like Bridgestone or Dunlop. When changing tires, find a reliable shop for assistance—they understand matching techniques and regularly measure tire pressure to ensure longer service life.

Was this review help?
6
1
Share
Expand All
More Forum Discussions

How does the Nissan Teana automatically lock the doors?

The method for the Nissan Teana to automatically lock the doors is: in the vehicle settings, select the 'auto-lock while driving' option and set a speed threshold. When the vehicle exceeds this preset speed, the doors will automatically lock. Additionally, for the 'auto-unlock' function, you can choose to unlock when shifting to P gear or when turning off the engine. The purpose of the auto-lock feature is anti-theft; the doors only lock after reaching a certain speed to prevent door-pulling robberies during traffic jams or at red lights, providing a certain level of security. Taking the Teana 2021 2.0LXE Fashion Edition as an example: it is a mid-size car launched by Dongfeng Nissan, with dimensions of 4901mm in length, 1850mm in width, and 1450mm in height, and a wheelbase of 2825mm. It is equipped with a 2.0L naturally aspirated engine with a maximum power of 115kw, paired with a CVT continuously variable transmission.
16
1
Share

How to Use the Cruise Control on Jetour X70?

Jetour X70 cruise control usage is as follows: 1. After activating cruise control, press "SET/-" to enter cruise mode at the current speed, and you can release the accelerator pedal. 2. While in cruise mode, hold the "RES/+" and "SET/-" buttons to increase or decrease the cruising speed. 3. Pressing the brake/accelerator pedal or switching to the "CANCEL" button will temporarily cancel cruise control. Press the "RES/+" button to resume. Precautions for using cruise control are as follows: 1. Cruise control requires the driver to manually apply the brakes; adaptive cruise control will automatically brake. 2. Cruise control will deactivate when the brake is pressed. The set speed value is retained and can be manually resumed. 3. Using cruise control on winding, steep, bumpy, slippery roads, or in heavy traffic can be dangerous. Always turn off cruise control to avoid hazards. 4. On downhill slopes, the vehicle may accelerate. Apply the brakes to control speed and prevent accidents.
3
1
Share

Is it serious if the car fan keeps running?

It is serious if the car fan keeps running. Detailed reasons and solutions for the car fan continuously running: The car fan keeps running even when the water temperature is normal because the thermostat is damaged or the sensor function is not installed. The sensor detects the engine water temperature, and the fan starts when the temperature rises. If it fails, the fan keeps running regardless of the water temperature. The advantage is that the water temperature won't get too high in summer, but the disadvantage is that there will be no warm air in winter. Solutions: Normally, when the water temperature reaches a certain level, the thermostat opens, allowing the radiator water to circulate. The fan will only start when the engine temperature reaches a certain level, detected by the sensor. In colder weather, the fan rarely activates while driving. If you suspect an issue, you can test it by revving the engine to under 2500 RPM while stationary. Typically, the fan should start within about 10 minutes under normal conditions. If the car has a thermostat installed and the water temperature is not too high or the engine does not overheat, there should be no major issues. It is best to visit a service station for a check-up and use a diagnostic tool to measure the water temperature. To prevent radiator corrosion, always use high-quality, long-lasting antifreeze from reputable manufacturers that meets national standards.
6
5
Share

Can a C1 license drive a C5 vehicle under the 2021 new traffic regulations?

Under the 2021 new traffic regulations, a C1 license cannot drive a C5 vehicle. A C1 license only allows driving vehicles with a mass not exceeding 4,500 kilograms, seating no more than 9 people, and with a total length less than 6 meters. On the other hand, a C5 license is a special category established for disabled individuals, allowing them to drive specially modified automatic transmission vehicles. Permitted vehicle types for a C1 license: The scope of a C1 license includes small and mini passenger vehicles, as well as light and mini cargo vehicles; light, small, and mini special-purpose vehicles; and small passenger vehicles seating 9 or fewer people. Vehicles not permitted for a C1 license: Large buses, tractor units, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, and trams. Additionally, a C1 license does not permit driving vehicles with more than 9 seats or trucks with a total length exceeding 6 meters.
13
4
Share

What kind of oil should be used for lubricating car sunroof rails?

For lubricating vehicle sunroof rails, it is recommended to use dedicated sunroof rail lubricating oil. Specialized rail lubricating oil generally has three characteristics: 1. Low-temperature resistance, which can effectively prevent freezing; 2. Good water resistance, preventing dilution when washing the car; 3. Strong durability with excellent lubrication performance. Precautions for sunroof use are as follows: 1. The best way to maintain a sunroof is by applying oil. Before oiling, the sunroof rails should be thoroughly cleaned to remove any dust or debris. 2. In winter, especially after snowfall, the sunroof should not be opened immediately as the glass seal may adhere to the surrounding seals. Opening the sunroof may damage the seals, leading to water leakage issues later. 3. When washing the car, high-pressure water jets should not be directed at the seals immediately. This can damage the original viscosity of the seals, allowing water to seep into other areas. 4. If the sunroof makes noise or fails to close, it is often not broken; replacing the rubber seal can usually solve the problem.
14
5
Share

What is Chiran No.1 Fuel All About?

It is a combustion improver that enhances the burning efficiency of gasoline. Combustion Improver: Refers to substances that cannot burn themselves but can provide the oxygen required for combustion. In a broad sense, additives used to improve combustion conditions all fall under the category of combustion improvers. Combustion improvers include combustion promoters, slurry dispersants, water separators, ash modifiers, and emulsifiers. Uses of Combustion Improvers: Cleaning Carbon Deposits: Because it contains detergent dispersants, oxygen enhancers, and combustion improvers, it can fully decompose carbon deposits, prevent the formation of sticky substances in the combustion system, and promote complete fuel combustion, thereby reducing engine carbon deposits, ensuring smooth engine operation, and enhancing power performance. The effect is particularly noticeable for older vehicles. Supporting Engine and Fuel System Maintenance: It can compensate for certain deficiencies in fuel properties while adding new characteristics, such as effectively reducing the formation of deposits in the fuel system, cleaning the fuel system, enabling more complete combustion, saving fuel, enhancing engine performance, reducing exhaust emissions, lowering engine noise, and ensuring smooth engine operation, among other benefits.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.