What is the tire model of Wuling Hongguang S3?

2 Answers
VanBennett
07/29/25 1:56am
The tire model of Wuling Hongguang S3 is 205/65R16. The first number 205 indicates that the tire width is 205MM, 65 represents the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width. The letter R stands for radial tire, and 16 indicates the rim diameter is 16 inches. The Wuling Hongguang S3 has a maximum speed of 175km/h and a fuel consumption of 7.1L per 100 kilometers. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
18
3
Share
OAsher
08/12/25 5:58am
I used to drive a Wuling Hongguang S3, and the tire size was the common 185/65 R14. This size is quite stable in standard configurations—185 represents the tire width of 185 millimeters, 65 is the aspect ratio, and R14 indicates a 14-inch wheel diameter. As a daily driver, I find this model economical and suitable for city roads. However, for long-distance trips, it's essential to regularly check tire pressure and wear, as improper use can lead to premature tire failure. My own experience was realizing the importance of tire size when I had a flat—mismatched dimensions can affect braking performance and safety. I recommend checking the owner’s manual during every service or directly verifying the code on the tire sidewall to avoid incorrect replacements that could impact driving comfort. Overall, matching the correct size is crucial, especially for a versatile vehicle like this.
Was this review help?
4
2
Share
Expand All
More Forum Discussions

How to resolve the C1035 fault code?

If the brake system warning light is illuminated in your car, it may indicate a potential issue with the anti-lock braking system (ABS). It is recommended to visit an auto repair shop and use an automotive diagnostic scanner to inspect the ABS system and read the fault code. Once the issue is identified, proceed with the necessary repairs based on the fault content. If it is an intermittent fault, use the automotive diagnostic scanner to clear the fault code.
5
3
Share

How to start a C2 automatic transmission car?

Turn on the turn signal switch and activate the left turn signal. Press the brake pedal, shift the transmission lever to "D" gear, honk the horn once, and release the handbrake. Observe the traffic conditions in front and behind again, making sure to check the left rear traffic situation through the left rearview mirror. Slowly release the brake pedal, gently press the accelerator pedal, and after starting onto the driving lane, turn off the turn signal by switching back the turn signal switch.
3
4
Share

How to Solve the Problem of Loud Tire Noise in CRV?

If it is tire noise, it is recommended to replace them with Michelin silent tires. If it is a new car and the noise feels very loud, you can add some sound insulation to the vehicle. The engine noise of the new model is a bit loud when accelerating, so you can go to a car decoration shop to explore some noise reduction modifications.
14
0
Share

How to Set Up Automatic Mirror Tilt When Reversing in CR-V?

Power on the vehicle but do not start the engine (press the start button without stepping on the brake). Select the side mirror you want to set by pressing the mirror adjustment selection button (left or right). Step on the brake, shift to R (Reverse) gear, and the selected mirror will automatically tilt down to the factory preset position. Adjust it to your desired position using the adjustment buttons. Press and hold the seat memory button (1, 2, or 3) for about 2 seconds, step on the brake, shift to P (Park) gear, and press the mirror adjustment selection button once more to complete the setup.
13
3
Share

How to activate the automatic window roll-up feature when locking the CT4?

The one-touch window control button is located on the door next to the driver's seat. Press the button upwards to the first stop, and release it when the window reaches the desired position. Briefly pull the switch to the second stop to automatically roll up the window.
12
1
Share

How to view the dashcam footage on C260L?

Press this button to enter the settings interface. In the recording interface, a short press can also turn the sound on or off. When powered off, press once to turn on. When powered on, press and hold to turn off. Switch between three functions: photo, video, and playback. In the video interface, this button can also be used to enable the forced save function. Downward selection in the menu bar is for lens zoom-out (4/3/2/1x). Upward selection in the menu bar is for lens zoom-in (1/2/3/4x). Use this button to turn the recording function on or off. Some dashcams also use the [OK] button instead.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.