What is the tire model of Toyota Corolla?

1 Answers
Bridget
07/29/25 9:55pm
Toyota Corolla's tire model is 195/60R15, where 195 refers to the tread width of 195mm, 60 indicates the aspect ratio (the sidewall height is 60% of the width), R denotes that the tire is a radial tire, and 15 represents the rim diameter of 15 inches. The Toyota Corolla is a long-standing product under Toyota Motor Corporation, symbolizing the "crown of flowers." The Corolla is equipped with two engines: a 1.6-liter naturally aspirated engine and a 1.8-liter naturally aspirated engine. It features a MacPherson independent front suspension and a torsion beam rear suspension. The dimensions of the Toyota Corolla are 4530mm in length, 1705mm in width, 1490mm in height, with a wheelbase of 2600mm.
Was this review help?
11
4
Share
More Forum Discussions

What are the reasons for the increasingly heavy steering wheel of the Lavida?

The reasons for the increasingly heavy steering wheel of the Lavida are: 1. Insufficient power steering fluid; 2. Damage to the steering gear or steering column bearings; 3. Lack of lubrication or damage to the tie rod ball joint. Taking the 2019 Lavida as an example, it belongs to the compact car category, with body dimensions of: length 4613mm, width 1765mm, height 1460mm, wheelbase 2610mm, and curb weight 1210kg. The 2019 Lavida features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, paired with a 5-speed manual transmission.
2
5
Share

How Does Insurance Cover a Water-Damaged Car?

If you have purchased auto damage insurance, the insurance company will provide full compensation. If you have both auto damage insurance and water damage insurance, full compensation will be provided. Conversely, if you only have auto damage insurance without water damage insurance, the compensation amount from the insurance company will be significantly reduced. In such cases, even if you have insurance, it may not fall within the coverage scope.
14
2
Share

What Causes a Motorcycle to Have No High Voltage Spark When Starting?

When a motorcycle has no high voltage spark during starting, it indicates an issue with the ignition system components or their wiring connections. Below are the specific reasons: Potential wiring issues in the following parts: Faults in the spark plug, ignition coil, ignition module, magneto coil, ignition switch, kill switch, and side stand kill switch (if equipped), as well as open or short circuits in their wiring connections. For fuel-injected motorcycles, also check for issues with sensors related to ignition and the ECU. Corresponding solutions: Conduct a step-by-step inspection: check the spark plug, high-tension wire, ignition coil, and trigger coil. The engine cover on the left side usually doesn't have issues—problems are mostly in the electrical circuit. Sometimes, a faulty ignition switch circuit can shut down the entire electrical system. First, remove the spark plug cap, insert a screwdriver into the cap's electrode, and ground it to the frame. Then, kick-start the engine to test for spark. If there's spark, the issue is with the spark plug. If not, the problem lies elsewhere—start by checking if the spark plug is faulty.
17
5
Share

Does Transmission Removal Affect the Car?

After removing the transmission, if the screws are properly tightened and installed with the correct torque, there will be no impact on the engine. The general disassembly sequence is: transmission cover, first shaft, second shaft, intermediate shaft, and reverse gear shaft. Installation Inspection: Before installing the transmission cover, check the work area for any missing parts, ensure there is no axial movement in the shafts and fixed gears, verify the integrity of all gaskets, and confirm that all meshing gears engage fully across the entire tooth width. Manually slide the gears to check if they can move axially to full tooth width engagement. Rotate the first shaft by hand and test each gear to ensure smooth and flexible rotation without any sticking. Disassembly Inspection: All disassembled parts should be thoroughly cleaned and inspected. Replace any parts that cannot be reused. Generally, oil seals and gaskets that have been removed should not be reused and should be replaced.
14
1
Share

Can I Turn on Cool Air Without AC?

Turning on cool air without AC is not possible. Below are explanations regarding why AC must be turned on for cool air and precautions for using cool air in cars: Reasons why AC must be turned on: Cool air requires AC to be turned on. AC activates the air conditioning compressor, which starts working only when the AC button is pressed. The car air conditioning cooling system consists of a compressor, condenser, receiver-drier, expansion valve, evaporator, and blower. Precautions for using cool air in cars: When the air conditioning is on, try to avoid smoking. If you must smoke, adjust the ventilation control to the external circulation position. Never rest or sleep for extended periods in a car with the air conditioning running. In summer, parked cars can become extremely hot inside. After starting the vehicle, do not immediately turn on the air conditioning. It is best to open all windows for ventilation to release the hot air. Only after the interior temperature has dropped should you close the windows and turn on the air conditioning.
8
5
Share

What is the reason for tool marks on the screws connecting the center console to the door in a new car?

Tool marks on the screws connecting the center console to the door in a new car indicate that the door has been removed. All screws should be tightened once, and this could be a sign of the car being an accident vehicle. Definition of an accident vehicle: An accident vehicle refers to a vehicle that has suffered damage due to non-natural wear and tear, resulting in a decline in mechanical performance and economic value. Generally, an "accident vehicle" refers to a vehicle with structural damage. Additionally, flood-damaged cars and fire-damaged cars also fall under the category of "special accident vehicles." Methods to identify an accident vehicle: Methods to identify an accident vehicle include exterior inspection, light inspection, checking insurance records, and examining the interior. Conditions for quick accident handling: The conditions for quick accident handling are no personal injuries, no disputes among the parties involved regarding accident liability, the ability to drive the accident vehicle, all parties involved having vehicle insurance, and the willingness of the parties to proceed to a designated location for damage assessment.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.