···
Log in / Register

What is the tire model of the Volkswagen Tayron?

4 Answers
StephenRose
09/07/25 5:29am

The tire model of the Volkswagen Tayron is 235/55R18. The first number 235 indicates the tire width is 235MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 18 denotes the rim diameter is 18 inches. The Volkswagen Tayron has a top speed of 200km/h, accelerates from 0-100km/h in 8.7 seconds, and has a fuel consumption of 6.8L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard rim 5.00F".

Was this review help?
13
1
Share
EmilyRose
09/19/25 4:45am

The Volkswagen Tayron commonly comes with tire sizes like 235/55 R18 or 235/50 R19, depending on the trim level. For instance, the base model often uses 215/65 R17, while higher trims are equipped with 235/50 R19 for a sportier feel. The numbers in the tire size are significant: 235 indicates the tire width, 55 is the aspect ratio, and R stands for radial construction, all of which affect grip and handling. I often help friends check their cars and notice that the original specifications are labeled on the door edge sticker or in the manual. Don’t randomly change the tire size, as mismatched tires can lead to uneven wear and unstable high-speed driving. When choosing a car, consider tires that suit your driving conditions. For frequent mountain driving, wider tires are better, while standard sizes are more fuel-efficient and durable for city use. Regularly checking tire pressure and tread depth is also crucial to prevent blowouts and extend tire life.

Was this review help?
2
1
Share
Expand All
DelTaylor
11/02/25 5:08am

If you're asking about the tire model of the Volkswagen Tayron, I've been driving this car for two years, and the common size is 235/55 R18, as indicated on the door placard for the original factory specifications. Different model years of the Tayron may vary; for example, the 2019 base model came with 215/65 R17, while the 2022 high-end version was equipped with 235/50 R19. This size directly affects the driving experience: a higher aspect ratio offers comfort but softer cornering, while a lower aspect ratio like the 19-inch provides more stable handling. During every maintenance check, I have the technician measure the tire pressure to ensure it's around 2.5 bar, as both overinflation and underinflation can waste fuel and damage the rims. When replacing tires, don't opt for cheaper, mismatched models. Always check the VIN code to match the correct size before purchasing online to avoid abnormal vibrations on the road that could harm the suspension system, saving costs and hassle in the long run.

Was this review help?
3
1
Share
Expand All
OLouis
12/16/25 5:12am

The Volkswagen Tayron typically uses 235/55 R18 tires, with higher-end models upgrading to 235/50 R19 or larger sizes. This design impacts vehicle performance: wider tires like 235 improve wet-road traction but may increase fuel consumption; lower-profile 19-inch variants prioritize agile handling response. I always emphasize not neglecting tires, as they directly contact the road - mismatched sizes can cause skidding risks. Check the vehicle sticker or manual for exact specifications. Routine maintenance is simple: monthly pressure checks, inspecting rims for deformation, and measuring tread depth before long trips ensures safety.

Was this review help?
13
3
Share
Expand All
More Forum Discussions

What Causes Car Shaking During Start-Up?

Reasons for car body shaking after start-up: unstable oil pressure, aging engine components, and severe engine carbon buildup. If the car shakes during start-up, it is recommended to promptly visit a 4S shop for inspection and repair to avoid greater safety hazards. Below are the detailed explanations: Unstable Oil Pressure: Abnormal fuel pump supply pressure or incorrect and poor performance of the intake pressure sensor can cause body shaking. Solution: Check the oil pressure and replace components if necessary. Aging Engine Components: Car shaking is also related to aging engine mounts. Engine mounts are essentially the shock absorption system of the engine, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations will transfer to the steering wheel and the cabin, causing shaking during idle. Solution: Replace engine components. Severe Engine Carbon Buildup: The most common cause of car shaking is a dirty throttle body or excessive carbon buildup in the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold start injector will be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts and making it difficult to start. Solution: Clean the fuel system and check if the idle control valve has carbon buildup that needs cleaning.
18
0
Share

What does 'Please change the engine oil immediately' mean?

"Please change the engine oil immediately" is a reminder to the vehicle owner that the engine oil is running low and needs to be replaced. The method for changing the engine oil is as follows: 1. Lift the vehicle, remove the protective plate, and place a container under the oil drain screw; 2. Unscrew the oil drain screw, use an air gun to blow for two minutes at the oil filler port, then tighten the oil drain screw after draining and wipe it with a tissue to check for leaks; 3. Reinstall the protective plate and lower the vehicle, then add new oil through the oil filler port. Precautions for changing engine oil: 1. Perform the operation while the engine is warm to ensure the old oil is drained as completely as possible; 2. Add the new oil and ensure the amount is appropriate; 3. After adding the oil, start the engine and check all components for leaks. Run the engine for 3 minutes to confirm the oil level is at the normal mark.
10
5
Share

Where does the car air conditioner drip water?

The car air conditioner drips water at a position slightly to the right of the middle of the chassis below the center console, connected by a hose from below the evaporator to the chassis. The functions of the air conditioner are: 1. To cool, heat, ventilate, and purify the air inside the car; 2. To provide a comfortable environment for passengers, reduce driver fatigue, and improve driving safety. Maintenance methods for the air conditioner: 1. Clean the air conditioner vents promptly; 2. Maintain the air conditioner condenser promptly; 3. Clean or replace the air filter promptly. Proper usage methods for the air conditioner: 1. Turn off the air conditioner when driving at low speeds; 2. Do not smoke when the air conditioner is on inside the car; 3. Turn off the engine before turning off the air conditioner; 4. Immediately activate the internal circulation when entering the car in summer.
9
2
Share

How to Turn on the Buick Heater Air Conditioning?

The method to turn on the Buick heater air conditioning is: 1. Start the engine; 2. Press the air conditioning control button; 3. Turn off the air conditioning cooling switch; 4. Click the plus button for temperature adjustment to set the air conditioning temperature. Buick models include: Buick GL8, Buick Excelle, Buick Regal, Buick LaCrosse, Buick Envision, etc. Taking the 2021 Buick GL8 as an example, it is an MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, and a wheelbase of 3088mm. The 2021 Buick GL8 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 237PS, a maximum torque of 350Nm, a maximum power of 174kW, and is paired with a 9-speed automatic transmission.
1
5
Share

How to reset the tire pressure warning light on an Audi A4L?

The method to reset the tire pressure warning light on an Audi A4L is: 1. Press the 'car' button located on the center of the dashboard; 2. Rotate the central round button to find options such as maintenance reset, oil level, and tire pressure reset, then select and confirm. Taking the 2020 Audi A4L as an example, it belongs to the mid-size car category with body dimensions of length 4858mm, width 1847mm, height 1439mm, and a wheelbase of 2908mm. The 2020 Audi A4L features a five-link independent suspension at the front and rear, and is equipped with a 2.0L turbocharged engine delivering a maximum horsepower of 150PS, maximum power of 110kW, maximum torque of 270Nm, paired with a 7-speed dual-clutch transmission.
16
3
Share

Where is the production date on the seat belt?

The production date on the seat belt is located on the label at the bottom end of the belt. The function of the seat belt is: when the vehicle collides or emergency braking is applied, the pre-tensioning device will instantly retract, tightening the slack belt, firmly securing the occupant to the seat to prevent secondary collisions. The method for replacing the seat belt is: 1. Locate the wiring under the car seat and find the sensor wire for the seat belt buckle; 2. Remove the seat cushion, take off the airbag, find the bolt securing the seat belt, and remove the seat belt buckle; 3. Find the seat cushion sensor inside the seat cushion and remove it; 4. Install the new seat belt buckle onto the seat and insert the bolt; 5. Install the weight sensor on the car seat, then install the new retractor and tighten it with a wrench; 6. Restore the car seat cushion to its original position and arrange the wiring at the bottom of the seat properly.
15
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.