What is the tire model of the Tiguan L?

2 Answers
OAxel
07/29/25 6:35am
The tire specification of the Tiguan L is 235/50R19. More relevant information is as follows: 1. Tires are an important component of a car. Correctly identifying these markings is crucial for tire selection, usage, and maintenance, which is significant for ensuring driving safety and extending tire lifespan. 2. Most tire model markings are in the form: Tiguan L tire model 235/50R19. The meanings of these numbers are as follows: 235 indicates the tire section width in mm, generally ranging between 145-285mm with intervals of 10mm; 50 is the aspect ratio, representing the ratio of the tire sidewall height to the tire section width, where 50 stands for 70%. Generally, the aspect ratio of tires ranges between 30%-80%. Under normal circumstances, ordinary sedans should not use tires with an aspect ratio >75%, while luxury cars and high-performance sports cars are recommended to use tires with an aspect ratio <60%; R indicates the tire is of radial construction, and 19 is the rim diameter in inches.
Was this review help?
13
0
Share
MacEvelyn
08/12/25 10:00am
Last year when I drove the Tiguan L, I researched its tire specifications. The standard configurations commonly include sizes like 225/60 R17 or 235/50 R19, depending on the version you purchase, such as the Comfort Edition or Flagship Edition. The number 225 on the tire indicates the tire width in millimeters, 60 is the aspect ratio (height percentage), R stands for radial type, and 17 is the rim size in inches. When replacing tires, don’t choose randomly—match them to the original specifications to avoid affecting the suspension system or fuel consumption. I once replaced my tires with a new set and found that SUVs require tires with a high load index (e.g., 103 or above) due to their weight, to prevent blowout risks. Regularly check tire pressure and maintain it at 2.3-2.5 bar to extend tire lifespan. It’s best to consult the manual or visit a dealership to confirm the correct tire model to avoid extra wear or noise issues, as tire specifications may vary between different vehicle batches.
Was this review help?
16
0
Share
Expand All
More Forum Discussions

What is the function of a car VPS?

The VPS function in a car is part of the vehicle anti-theft system. Here is a relevant introduction about car anti-theft systems: Introduction: To better enhance anti-theft performance, some vehicles are equipped with a steering lock. The steering lock is used to secure the car's steering shaft. It is integrated with the ignition lock and installed under the steering wheel, controlled by the key. After the ignition lock cuts off the ignition circuit to stop the engine, turning the ignition key to the extreme left position extends a locking tongue into the steering shaft groove, mechanically locking the car's steering shaft. Types: A car anti-theft device is installed in the vehicle to increase the difficulty and prolong the time required for theft, acting as a guardian for the car. By connecting the anti-theft device to the car's electrical circuit, it prevents vehicle theft, intrusion, and protects the car while enabling various anti-theft functions. With advancements in technology, various types and structures of anti-theft devices have been developed to counter increasingly sophisticated theft methods. Anti-theft devices can be categorized into four main types: mechanical, chip-based, electronic, and network-based.
8
4
Share

What are the impacts of new energy vehicles in Northeast China during winter?

The three northeastern provinces of China experience extremely cold winters. In low-temperature environments, the impact on the range of new energy vehicles is significant. Here are the specific details: Temperature: The normal operating temperature of a car engine is generally between 80°C and 90°C, with some high-performance engines reaching above 90°C to 100°C. In summer, the ambient temperature is already high, allowing the engine to reach its normal operating temperature within about 5 minutes after starting. However, in winter, due to the low temperatures, reaching 90°C takes much longer, not to mention maintaining this state. Therefore, a longer running time is required to achieve optimal operating conditions, naturally increasing fuel consumption. Additionally, at low temperatures, engine oil becomes denser and less fluid, hindering engine operation, which also requires prolonged engine running to warm up the oil and improve its fluidity. Two key factors: One is thermal insulation materials, and the other is electric four-wheel drive. Facing extremely low temperatures, achieving the same range as in southern regions is nearly impossible without appropriate thermal insulation measures for the battery. Therefore, only by improving the range will consumers in Northeast China consider purchasing new energy vehicles.
18
3
Share

What is the reason for the Piaggio X7 leaking coolant?

If the coolant reservoir is leaking, contact the dealer to replace the reservoir. Here are the relevant details: Introduction: Not all motorcycle models have coolant; only those equipped with liquid-cooled engines require attention to coolant changes. The addition and replacement of coolant differ from engine oil. Although it needs regular inspection, the replacement frequency is relatively low, and certain precautions must be taken when adding it. When checking motorcycle coolant, it should be done when the engine is cold. If the coolant level remains between the upper and lower marks, it is generally normal and does not require topping up. However, if the level drops to the lower mark, it needs to be replenished. Coolant Selection: When adding coolant, try to choose the same brand and color. Different brands and colors of coolant may have slight differences in their formulations. If these differences are ignored and coolant is added haphazardly, as some riders say, it could create a "jelly-like" substance. Although the actual situation may not be that severe, it will certainly affect the cleanliness of the cooling system. Therefore, avoid adding coolant randomly.
20
3
Share

How many seconds does the Mercedes-Benz C200L take to accelerate from 0 to 100 km/h?

The Mercedes-Benz C200L takes 7 to 8 seconds to accelerate from 0 to 100 km/h. In terms of the powertrain, it is equipped with a 1.5T four-cylinder turbocharged engine, delivering a maximum power of 156 horsepower and a maximum torque of 250 Nm. For the transmission system, it is paired with a 9-speed automatic manual transmission. In terms of body dimensions, the Mercedes-Benz C200L measures 4783mm in length, 1810mm in width, and 1442mm in height, with a wheelbase of 2920mm. Exterior-wise, the Mercedes-Benz C200L features a youthful and stylish design. The front fascia boasts a star-studded grille that exudes a premium feel, with the prominent three-pointed star logo standing out. The matrix LED headlights are bright and spirited, while the lower honeycomb air intake highlights a sporty vibe. The side profile of the car is compact and well-proportioned, with sharp and dynamic character lines that convey a strong sense of power. The rear end is rounded and sensual, with sleek and refined taillights, blending fashion and vitality.
19
2
Share

What is a Pressure Plate?

A pressure plate is a metal disc that, under normal conditions, tightly clamps the clutch disc to form a single unit. It rotates with the engine and transmits power to the transmission. Clutch: The clutch is located inside the flywheel housing between the engine and the transmission. The clutch assembly is bolted to the rear face of the flywheel, and the output shaft of the clutch serves as the input shaft of the transmission. While driving, the driver can press or release the clutch pedal as needed to temporarily disconnect or gradually engage the engine and transmission, thereby interrupting or transmitting the engine's power to the transmission. The clutch is a common component in mechanical transmissions, allowing the drivetrain to be disconnected or engaged at any time. Relationship Between Clutch and Pressure Plate: The clutch pressure plate is a metal disc that, under normal conditions, tightly clamps the clutch disc to form a single unit. It rotates with the engine and transmits power to the transmission. When the clutch pedal is depressed, the pressure plate separates from the clutch disc, cutting off the engine's power output and enabling gear shifting. Releasing the clutch pedal causes the pressure plate to re-engage with the clutch disc, resuming power transmission.
18
5
Share

Where is the negative terminal cable of the Citroen C4L located?

The negative terminal cable of the Citroen C4L is located on the battery box, covered by a black square lid. After opening this lid, you can see the negative terminal post, which is black. The Citroen C4L is a compact family car under the Citroen brand, equipped with two turbocharged engines: 1.2L and 1.6L. These engines are paired with either a 5-speed manual transmission or a 6AT transmission. In terms of exterior design, the Citroen C4L features a new front face design where the double chevron logo is integrated with the grille. The upward-slanting cut headlights, dual creases on the hood, and overall front lines create a more dynamic and smooth appearance. The crystal-cut LED daytime running lights add a premium touch, along with the double-layer grille and lowered front bumper design. Regarding dimensions, the Citroen C4L measures 4620mm in length, 1780mm in width, and 1498mm in height, with a wheelbase of 2710mm.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.