What is the tire model of the Teramont?

3 Answers
VanRiver
08/28/25 4:45am
The Teramont uses three specifications of tires, which are 245/60R18, 255/55R19, and 255/50R20. The following is the relevant introduction about tires: 1. Tires are the only parts of a car that are in contact with the ground. Tires are related to the driving stability and safety of the car, so it is important to pay attention to the tires of the car. Tires are rubber products, and rubber products will age after long-term use, so tires need to be replaced regularly. 2. Under normal circumstances, tires installed on a car can be used for four years. When purchasing new tires, you must also check the production date clearly, because tires have a shelf life. Normally, the shelf life of tires that are not used is three years. If the tires have been in storage for more than three years, do not purchase them. After installing new tires, it is necessary to perform a dynamic balance test on each wheel to prevent shaking during high-speed driving.
Was this review help?
8
0
Share
KateMarie
09/10/25 3:12am
When it comes to the tire specifications of the Touareg, it actually depends on the specific configuration and model year. My vehicle is last year's base model, which comes standard with 245/60 R18 tires, while the higher-end versions might have 255/50 R20. You should check the tire label on the door frame or the owner's manual to confirm your model's specifications, as factory settings vary based on wheel size. Choosing the wrong tire size can affect traction and fuel efficiency—for example, smaller tires offer better stability on wet roads, while larger ones provide more responsive handling during turns. For daily driving, it's important to regularly check tire pressure, maintaining it around 30-35 psi to extend tire life. If the tires are severely worn or you're changing seasons, it's advisable to visit a dealership to match the original specifications—don't compromise safety by opting for cheap off-brand tires!
Was this review help?
10
2
Share
Expand All
DeAdam
10/24/25 4:01am
I noticed that the tire specifications for the Touareg are quite diverse. Generally, the base model comes with 245/60 R18, while the higher trim upgrades to 255/50 R20. Choosing the factory-matched specifications is crucial, as mismatched tires can cause bumpy rides and excessive noise. The numbers in the specification represent the width, aspect ratio, and wheel diameter. The exact data depends on your vehicle's model year, so it's best to check the owner's manual or dealership records. I've changed tires myself and recommend sticking with reliable brands like Michelin or Goodyear, as factory-recommended tires can improve fuel efficiency and ride comfort. Regular tire pressure checks are essential to prevent blowouts, especially on long trips.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

How Long Does It Take to Complete the Check-ins for Subject 2 Before the Exam?

According to the new teaching syllabus, Subject 2 requires 16 class hours. The maximum daily check-in is limited to 4 class hours, meaning it takes at least 4 days to complete the check-ins. During the validity period of the study permit, you can pay the retake fee and schedule a retake after completing the study. The retake fee varies depending on the region. Below is relevant information about Subject 2 learning: 1. Simulation Hours: The teaching content of "Standard Operation of Control Devices" and "Vehicle Inspection and Adjustment Before Starting" in "Basic and Venue Driving" should be conducted using driving simulation equipment. Content such as "Driving in Adverse Conditions," "Mountain Road Driving," and "Highway Driving" in "Road Driving" can also be taught using driving simulation equipment. The simulation teaching duration is 4 class hours, with each class hour being 60 minutes. Effective teaching time must not be less than 45 minutes. Each student's daily classroom learning time must not exceed 4 class hours, and the daily practical operation learning time must not exceed 4 class hours. 2. Exam Content: The test subjects include traffic regulations and related knowledge, venue driving, and road driving (including safe and civilized driving).
5
4
Share

What are the reasons why the car wiper cannot be turned off?

Car wipers cannot be turned off due to issues in the circuit, which may be caused by a faulty combination switch or damaged wiring where the negative terminal of the wiper is connected to the car body. The wiper is a blade structure installed in front of the windshield, consisting of components such as a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The main function of the wiper is to clear rain, snow, and dust from the windshield that obstruct the view. The power source of the wiper comes from the motor, which is the core of the entire wiper system. The quality requirements for the wiper motor are very high, typically using a DC permanent magnet motor. The wiper motor installed on the front windshield is usually integrated with the worm gear mechanical part.
16
5
Share

What to Do When the Engine Warning Light on the Dashboard Comes On?

If the engine warning light comes on, you can follow these steps: First, check whether the engine is running normally. Look for issues such as shaking, black smoke, or difficulty starting. If any of these problems exist, avoid restarting the engine. Note: If the light is red, do not restart the engine under any circumstances. If the engine is running normally and the car can be driven, proceed to a service station as soon as possible to diagnose the issue. A service station can easily read the fault code using a portable diagnostic tool, allowing for targeted repairs. If the engine is running normally, the owner can also try gently reconnecting various wiring harness connectors, as a loose connection might be the cause. Alternatively, repeatedly turning the key to the ON position may reset the warning light. Generally, the engine warning light may come on due to the following seven reasons: Sensor failure: This includes sensors such as the coolant temperature sensor, crankshaft position sensor, air flow sensor, intake air temperature sensor, and oxygen sensor. If these sensors are damaged, poorly connected, or their signals are interrupted, the car's ECU cannot accurately obtain engine data, triggering the warning light. Fuel or oil quality issues: If the recommended fuel or engine oil is not used, it may cause engine wear and trigger the warning light. Poor combustion of the air-fuel mixture: Poor combustion can lead to engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Possible causes include faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines. Turbocharger issues: Problems with the intake boost system or turbocharger can also trigger the warning light. The most common issue is turbocharger damage, often accompanied by symptoms such as oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake system issues: A clogged intake system can lead to engine problems, including the warning light. A dirty or uncleaned air filter can cause intake issues. Exhaust system issues: Exhaust system failures, such as faulty rear oxygen sensors, catalytic converters, or exhaust camshafts, can trigger the warning light. The most common issue is catalytic converter failure, often caused by using leaded gasoline, improper lubricant additives, physical damage, or fuel system issues. Anti-theft system malfunction: If the car's electronic anti-theft system fails or the anti-theft controller does not match the engine ECU, the engine may not function properly, and the warning light will illuminate.
16
3
Share

Where to Check the Vehicle's Manufacturing Date?

To check the vehicle's manufacturing date, look for a nameplate located below the B-pillar on the passenger side. This nameplate contains the vehicle's information. The vehicle nameplate, also known as the Vehicle Identification Number (VIN), is a unique 17-character alphanumeric code that represents various details about the vehicle. Due to its uniqueness (typically ensuring no duplication for 30 years) and its ability to provide vehicle information, it is often referred to as the vehicle's ID card. The VIN includes details such as the manufacturer, year, model, body type and code, engine code, and assembly location.
17
4
Share

Which country is the origin of Audi?

Audi originates from Germany. Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group in Germany, and has branches in many countries including China. The car brands under Audi include: Audi A3, Audi A4L, Audi A6L New Energy, Audi A6L, and Audi S3. Taking the Audi A3 as an example: The Audi A3 is a compact car under FAW-Volkswagen Audi. The body type of this car is a 5-door, 5-seat hatchback, with a 7-speed dual-clutch transmission, a wheelbase of 2630mm, turbocharged intake form, a 1.4T L4 engine, and a top speed of 210 kilometers per hour.
6
2
Share

What is the tire model of the 2013 Passat?

The tire model of the 2013 Passat is 215/60R16. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during driving. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. The manufacturer of the 2013 Passat is SAIC Volkswagen, classified as a mid-size car, equipped with a 1.4T L4 engine and turbocharged intake. The dimensions of this car are 4870mm in length, 1834mm in width, and 1472mm in height, with a wheelbase of 2803mm. The body type is a 4-door, 5-seat sedan, and the transmission is a 5-speed manual.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.