What is the tire model of the Teana 2.0 Comfort Edition?

2 Answers
DakotaAnn
08/29/25 3:29am
The front and rear tire models of the Teana 2.0 Comfort Edition are both 205/65-R16. More information about this model is as follows: 1. The Nissan Teana is a premium luxury sedan under the NISSAN brand. With cutting-edge technology, Teana perfectly combines Driving-Technology (Precision Driving Engineering) and Comfort-Technology (Absolute Comfort Engineering), bringing the design concept of mid-size sedans to a new level. 2. The exceptional qualities of the Teana, NISSAN's new premium luxury sedan, were introduced to the Chinese market through the Bluebird and Sunny models, and via Nissan's joint venture in Taiwan. It is often regarded as the first true product of the collaboration between Dongfeng and Nissan.
Was this review help?
3
2
Share
VonJameson
09/10/25 8:09am
As a seasoned Nissan Teana driver, I recall that the standard tires for the Teana 2.0 Comfort trim are 215/60 R16, which is a mainstream configuration. The specific numbers indicate a 215mm width, 60% aspect ratio, and 16-inch wheel size. This setup is optimized for comfort, with a higher aspect ratio helping to absorb road bumps, providing a soft yet stable ride for city commuting, and maintaining good noise control at high speeds. The original tires often come from brands like Bridgestone or Yokohama, known for their durability. Don't overlook tire pressure in daily driving; maintaining it around 2.3bar is ideal to prevent uneven wear and extend tire life. When replacing tires, it's advisable to stick with the original specifications and avoid arbitrary size upgrades to prevent affecting fuel efficiency. A wheel alignment every 50,000 kilometers is a cost-effective and safe practice. This tire design fully considers the Teana's positioning, making it suitable for family daily use and long-distance travel without fatigue.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Why does it show that I have not participated in driver training?

Here are the specific reasons why it shows that you have not participated in driver training: 1. Insufficient driving course hours. According to the 'Motor Vehicle Driver Training and Examination Outline', you need to complete 12 credit hours for Subject 1 before you can make an appointment. The review of these credit hours usually takes 2-3 working days. Therefore, if the hours are not completed or the review is not finished, this message will appear. 2. It may be due to incomplete documentation or information not yet entered into the system, so you cannot schedule the exam for now. 3. The credit hours for the subject have not been reviewed yet. You can make an appointment after the review is completed. 4. Before scheduling Subject 1, you need to complete traffic duty or attend training classes. After completing these, the vehicle management office will register them, and only with the corresponding training records can you schedule Subject 1.
9
1
Share

Can Dent Repair Be Covered by Insurance?

Dent repair can be covered by insurance. However, if you want to claim insurance for car dent repair, the compensation will only be assessed based on the price of sheet metal and painting. The insurance payout for sheet metal and painting outside 4S shops is not very high. Secondary repair: This method does not use traditional sheet metal techniques. If the vehicle has dents but the paint is not damaged, there will be almost no trace after the repair, which is quite good. Sheet metal repair: When the metal sheet of a vehicle is dented, the sheet metal repair method can be used. After the repair, the vehicle needs to be repainted. The repainting area should be slightly larger; otherwise, there might be two different shades of paint, as the newly applied paint may have a slight color difference compared to the original factory paint.
20
2
Share

What is the penalty for mistakenly entering a one-way street but immediately turning around?

Mistakenly entering a one-way street but immediately turning around will result in a corresponding fine and a deduction of three points. According to Articles 89 and 90 of the "Road Traffic Safety Law of the People's Republic of China", the following provisions are introduced: 1. Introduction one: Pedestrians, passengers, and non-motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined. Non-motor vehicle drivers who refuse to accept the fine may have their non-motor vehicles impounded. 2. Introduction two: Motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined.
5
5
Share

Is a Tiptronic Transmission CVT or AT?

cvt and at can both achieve tiptronic functionality. Below is an introduction to transmissions: 1. Basic introduction to transmissions: A device that changes the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machinery to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. 2. Functions of a transmission: (1) Change the gear ratio between the engine and the wheels, allowing the engine to operate under optimal conditions, expanding the torque and speed transmitted to the drive wheels, and achieving different speeds. (2) Enable the vehicle to reverse. (3) Provide a neutral gear.
5
3
Share

Are all cars automatic transmission now?

Nowadays, mid-to-high-end cars are basically automatic transmission. The following are the differences between manual transmission and automatic transmission: 1. Learning period: Manual transmission cars are more complex than automatic transmission, so the learning period is different. Generally, learning manual transmission takes at least one month longer than automatic transmission. Moreover, due to the greater difficulty in learning manual transmission, the pass rate for the driver's license test is also lower. 2. Obtaining a driver's license: The manual transmission license is C1 level, while the automatic transmission license is C2 level. People with an automatic transmission license cannot drive manual transmission cars, but those with a manual transmission license can drive automatic transmission cars. 3. Cost: Because manual transmission is more difficult to learn and has a lower pass rate, its cost is cheaper compared to automatic transmission. Generally, the cost of learning automatic transmission is more expensive.
10
3
Share

What does 'carriage price' mean?

Carriage price refers to the total price of goods loaded onto a vehicle, which is: goods price + short-distance freight price + local surcharge + dispatch fee = carriage price. Car (ship) board price: refers to the delivery price of goods sent to the train (port) at the departure station (port), including the ex-warehouse price, short-distance transportation and handling fees. The carriage price in the coal industry: refers to all costs except the train freight before the coal is loaded onto the train and about to be dispatched. It includes the pithead price of coal, taxes, truck freight, various taxes and fees at the train station, and railway planning fees. Floor price: in the stock market, when the market is oversold and many stocks can no longer fall, the price formed is called the floor price, which is the trading price on the stock market (unless otherwise specified, it includes taxes).
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.