What is the tire model of the Santa Fe?

2 Answers
DelAurora
08/26/25 5:51am
The Santa Fe has two tire models: 235/60R18 and 235/55R19. The first number 235 indicates the tire width is 235MM, 60 represents the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, the letter R stands for radial tire, and 18 denotes the rim diameter is 18 inches. The Santa Fe has a top speed of 206km/h and a fuel consumption of 8.9L per 100km. In addition to the model, the tire also carries the following common data: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
6
4
Share
BellaFitz
09/08/25 8:21am
I've been driving the Hyundai Santa Fe for two years now, with tire size 235/65R17, which represents a width of 235 millimeters, an aspect ratio of 65%, and 17-inch diameter rims. This size is quite balanced, providing good shock absorption in the city and comfort on long trips. I've replaced the tires once, sticking to the original factory specifications because mismatched sizes can affect suspension wear or lead to higher fuel consumption. I always pay attention to checking tire pressure—too low increases fuel usage, while too high makes the ride bumpy. I also regularly check tire wear; shallow tread patterns increase the risk of skidding, especially in rain or snow. For tire brands, I recommend Michelin or Bridgestone for their durability and safety. In short, don't skimp on this—safe driving is what matters most.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What is the wattage of a 12-volt car alternator?

The power output of a 12-volt car alternator is approximately 300 watts. The power of the car alternator varies depending on the electrical equipment in the vehicle. The car alternator serves as the primary power source for the vehicle. Its function is to supply power to all electrical equipment (except the starter) and charge the battery while the engine is running normally (above idle speed). Based on the standard three-phase stator winding of a typical alternator, additional winding turns and connections are added, along with an extra three-phase bridge rectifier. At low speeds, the output is provided by the primary winding and the additional winding in series, while at high speeds, the output comes from the primary three-phase winding. Currently, alternators are widely used in cars. Here are some usage precautions: Owners should regularly clean dirt and dust from the alternator's exterior to maintain cleanliness and ventilation. Owners should periodically check the tightness of the alternator's related fasteners and tighten any loose screws promptly. Owners need to adjust the tension of the drive belt appropriately. If it's too loose, it may slip easily, leading to insufficient power generation; if it's too tight, it may damage the belt and the alternator bearings.
2
3
Share

What type of body structure does the Stelvio use?

Stelvio adopts a unibody structure. Here is the relevant introduction about Stelvio's body structure: 1. Introduction: This vehicle uses a unibody structure, which is common for urban SUVs. Most urban SUVs utilize unibody construction. There are two main types of automotive body structures: body-on-frame and unibody. Most passenger cars or SUVs employ unibody construction. 2. Characteristics of unibody structure: The frame and body shell are integrated in unibody construction. On such bodies, you can observe front longitudinal beams, rear longitudinal beams, and numerous crossmembers beneath the floor panel. For vehicles with unibody construction, the chassis consists of front and rear subframes with suspension systems. This design offers larger interior space, lower center of gravity, and better comfort, but the torsional rigidity of the body is relatively weaker.
10
4
Share

What are the reasons for the Roewe RX5 air conditioner not cooling?

Lack of refrigerant, dirty air filter and condenser, circuit problems. The following are the reasons why the Roewe RX5 air conditioner is not cooling: 1. Lack of refrigerant: The refrigerant in the air conditioning system pipeline is insufficient, the pressure decreases, and the heat taken away becomes smaller. There will be slight leaks in the air conditioning pipeline or condenser, which is a normal phenomenon. If the refrigerant is insufficient or too little, it needs to be replenished. 2. Dirty air filter and condenser: Long-term lack of maintenance, dirty air filter and condenser, or clogging will result in poor cooling effect. If you do not have the habit of regular maintenance of the air conditioning system, you should perform a thorough cleaning of the air conditioning system and replace the air filter. 3. Circuit problems: By directly supplying power to the compressor electromagnetic clutch, you can preliminarily check whether the compressor has a problem. Generally speaking, the compressor rarely fails directly. If it is a problem with the compressor, it is recommended to leave it to professionals to handle.
1
4
Share

What type of wheels are commonly used in sedans?

In sedans, aluminum alloy wheels are commonly used. Here are the advantages of aluminum alloy wheels: Better Heat Dissipation: The thermal conductivity of aluminum alloy is three times higher than that of steel. During driving, friction between the tires and the road, as well as between the brake discs and brake pads, generates significant heat. This can lead to aging and accelerated wear of tires and brake pads, a sharp decline in braking performance due to high temperatures, and increased tire pressure, posing a risk of blowouts. Lighter Weight: Aluminum alloy wheels have a lower density than steel wheels. On average, each aluminum alloy wheel is about 2 kilograms lighter than a steel wheel of the same size. Excluding the spare wheel, this can reduce the total weight by approximately 8 kilograms. Lighter wheels also reduce resistance during acceleration, contributing to better fuel efficiency. Higher Precision: Aluminum alloy wheels are cast with much higher precision than steel wheels. They exhibit less out-of-roundness and imbalance. Additionally, aluminum alloy has a lower elastic modulus, providing better vibration resistance compared to steel wheels. These factors effectively reduce vehicle vibrations, enhancing driving comfort. More Aesthetic Appeal: Aluminum alloy exhibits better fluidity and tension than steel in high-temperature liquid states. Subsequent polishing and electroplating processes allow for more varied and attractive designs. Surface corrosion resistance treatments and electrostatic powder coating also ensure long-lasting appearance.
5
1
Share

Where is the Camry Cigarette Lighter Fuse Located?

The fuse is located in the fuse box above the driver's foot pedal area. Here is some relevant information about the Camry: 1. Vehicle Introduction: The Camry integrates Toyota's latest global design philosophy. Mr. Kawamoto, Toyota's chief engineer, stated: 'During the development of the Camry, we infused luxury genes that were absent in previous generations of CAMRY, giving it a more elegant temperament while also incorporating dynamic elements. 2. Power Performance: The hybrid version of the Camry is equipped with a 2.4-liter engine (147 horsepower) and a battery-driven unit with an output of 40 horsepower. In terms of fuel consumption, official data shows it to be 6L per 100 kilometers.
7
4
Share

Is the Jeep Compass fuel consumption high?

The Jeep Compass has a fuel consumption of approximately 8.7L/100km. Below is relevant information about the Jeep Compass fuel consumption: 1. Introduction to Jeep Compass fuel consumption: The Jeep Compass is equipped with a 1.4T turbocharged engine and a 2.4L naturally aspirated engine. The official fuel consumption provided by the Ministry of Industry and Information Technology for the 1.4T model is 7.1-7.8L/100km, while the 2.4L model is 8.6L/100km. Actual fuel consumption is slightly higher, with the 1.4T model averaging around 9L/100km and the 2.4L model averaging around 10L/100km. 2. Jeep Compass power: Compared to other vehicles in the same class, the Jeep Compass has relatively high fuel consumption. Its advantage lies in its power, featuring a 1.4T turbocharged engine and a 2.4L naturally aspirated engine with maximum power outputs of 165 horsepower and 175 horsepower, and maximum torque of 250 Nm and 228 Nm, respectively. This vehicle is also well-suited for off-road driving.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.