···
Log in / Register

What is the tire model of the RAV4?

4 Answers
DelAriana
08/31/25 5:13am

The RAV4 has three tire models: 225/65R17, 225/60R18, and 235/55R19, which vary depending on the vehicle configuration. Most original Toyota RAV4 tires use brands like Yokohama or Dunlop, while some may use Michelin or Bridgestone. Tire model explanation: For example, 225/65R17. 225 represents the tread width in millimeters; 65 is the aspect ratio (65%); R stands for Radial, indicating the tire has a radial structure; and 17 is the rim diameter in inches. As one of the essential components of a vehicle, tires not only affect the vehicle's handling performance but also the safety of passengers. No matter how fast a car goes, it relies on the contact area of its four tires. Tires often operate under complex and demanding conditions, enduring various deformations, loads, pressures, and temperature extremes during driving. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning ability.

Was this review help?
11
5
Share
VeraLynn
09/12/25 8:28am

The tire model of the Toyota RAV4 usually depends on the specific configuration and year, but the common size is generally around 225/65R17. This size represents a tire width of 225 mm, an aspect ratio of 65%, and a wheel diameter of 17 inches, which is suitable for most urban driving. In my daily use, I've found that choosing the right model can improve handling and fuel efficiency. The tire sidewall has clear markings, so you can confirm the size by checking it directly or referring to the owner's manual. For new car owners, it's recommended to regularly check tire pressure and wear conditions to avoid the risk of blowouts. A small tip to extend tire life is to rotate the tires every 8,000 kilometers to ensure even wear. Also, pay attention to seasonal changes, such as using snow tires in winter for better safety.

Was this review help?
13
5
Share
Expand All
SanTucker
10/27/25 2:29am

As an enthusiast who enjoys tinkering with cars, I often help friends check the tires on their RAV4. Most models use the 225/65R17 specification, but the actual tires are marked with numbers like 225/65R17 102H for direct interpretation. The 'H' represents the speed rating—don't overlook this detail. Before changing tires, ensure the rim size matches to avoid damaging the suspension system. I recommend prioritizing tread depth checks; if it's below 1.6mm, it's time for a replacement. Here’s a tip: choosing brands like Michelin can reduce noise and save fuel. During maintenance, clear debris from tire grooves to extend their lifespan. When changing tires yourself, always have a jack ready and prioritize safety—don’t rush.

Was this review help?
15
5
Share
Expand All
SanJustin
12/10/25 2:45am

From a safety perspective, using incorrect tire specifications can be hazardous. The RAV4 commonly uses 225/65R17 tires, and choosing the wrong size affects braking distance and stability. I prioritize regular tire pressure checks during driving, maintaining it between 2.3-2.5 bar. Tire aging also requires attention, with replacement recommended around five years. Ensuring consistent tire specifications helps prevent skidding accidents.

Was this review help?
19
1
Share
Expand All
More Forum Discussions

Should the car purchase contract be taken back when buying a car on installment?

It is necessary to take back the installment car purchase contract. Vehicle information must be written in detail: Clearly specify the brand of the car, vehicle identification number, engine number, vehicle code (chassis number), and other essential elements of the car itself, especially ensuring both the vehicle code and vehicle identification number are written to prevent the car dealer from switching the vehicle; the main configuration of the vehicle, color (specifically the seat color), manual or automatic transmission, and documents to be delivered with the car, etc. The total transaction price of the vehicle (either the ex-factory price or the on-the-road price), payment method, and deadline should be listed. The names must be consistent: Ensure that the name on the sales party's seal matches the name on the car purchase contract and the invoice. If there is any inconsistency, even in litigation, the consumer will be at a significant disadvantage due to unclear litigation subjects. If purchasing an imported car, due to the multi-level agency form, it is difficult to protect the buyer's rights without clarifying the contract subject.
8
3
Share

Why Shouldn't a New Car Exceed 100 MPH in the First 3,000 Kilometers?

Due to machining and assembly tolerances, the frictional resistance of moving parts in a new car is significantly higher during initial operation compared to normal conditions. This affects the break-in effectiveness during the early usage period, which can substantially impact the vehicle's service life, operational reliability, and fuel economy. Break-in regulations: • Never drive at full speed. Generally, do not exceed 100 km/h. • Avoid high-speed driving in all gears. Break-in period precautions: • For vehicles equipped with tachometers: shift to the next higher gear when the needle approaches the red zone. The engine's maximum allowable short-term RPM is 5,500. • Maximum permitted speeds per gear: 1st gear - 40 km/h, 2nd gear - 65 km/h, 3rd gear - 100 km/h, 4th gear - 135 km/h, 5th gear - 165 km/h.
9
3
Share

How Long Does It Take for a New Driver's License to Take Effect?

The new driver's license takes effect on the same day of replacement. Expired driver's license: If expired for less than one year, you can renew it normally; if expired for more than one year but less than three years, the license will be canceled, but you can renew it by passing the subject one exam; if expired for more than three years, the license will be invalid and cannot be renewed. Notes for license renewal: Motor vehicle drivers should apply for license renewal at the vehicle management office of the license issuing authority within 90 days before the expiration of the driver's license. The following documents must be submitted: the driver's identity proof; the driver's license; a medical certificate issued by a county-level or higher medical institution or a military medical institution at or above the regimental level.
5
5
Share

Can different brands of engine oil be added when the car is low on oil?

When the car is low on engine oil, different brands of oil should not be added. Reasons why engine oils cannot be mixed: Different brands and grades of engine oil are formulated with various additives based on the working characteristics and environmental requirements of different engines. This results in differences in viscosity, anti-wear properties, anti-corrosion properties, anti-knock properties, and volatility. Mixing them may degrade the oil's performance and even cause damage to the engine. Precautions for using engine oil: It is best to avoid mixing different brands of engine oil. In emergency situations, mixing can be done temporarily, but it is advisable to use oils of similar types and the same viscosity. After mixing different brands of oil, it is essential to appropriately shorten the maintenance interval. Since different brands and models of oil contain different additives, they may react with each other, leading to various issues.
15
5
Share

What does the free travel of a motorcycle clutch mean?

The free travel of a motorcycle clutch refers to the clearance when the clutch lever is lightly gripped. Components of the clutch: The main components inside the clutch are friction plates, which are divided into driving friction plates and driven friction plates. The driving friction plates are connected as a whole with the engine crankshaft via gears, while the driven friction plates are connected as a whole with the driving gear of the transmission via gears. Free travel refers to the clearance when the clutch lever is lightly gripped. Precautions for clutch usage: Proper use of the clutch can reduce mechanical wear, extend the engine's service life, eliminate jerking phenomena, ensure a comfortable riding experience, meet gear-shifting requirements, cut off power, and facilitate braking. The motorcycle clutch is generally located on the right side, next to the foot brake, and is used to transmit or cut off the engine's power. The purpose of cutting off power is usually to facilitate gear shifting.
13
1
Share

What happens if you don't attend the Subject 2 driving test?

If you have already scheduled the Subject 2 driving test but fail to attend, it will be marked as a failure. Here is the relevant information: Additional details: If an applicant is unable to attend the test at the scheduled time due to unforeseen circumstances, they must apply to cancel the appointment at least one day in advance. If the applicant does not attend the test at the scheduled time without prior cancellation, the test will be marked as a failure. Content: The test for small automatic transmission vehicles includes reverse parking, parallel parking, curve driving, and right-angle turns. For three-wheeled vehicles, regular three-wheeled motorcycles, regular two-wheeled motorcycles, and light motorcycles, the test consists of stake tests, hill starts, and single-plank bridge driving. The test content for wheeled self-propelled machinery, trolleybuses, and trams is determined by the provincial traffic management authorities of the public security department.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.