What is the tire model of the old Qashqai?

2 Answers
FinleyFitz
07/28/25 9:16pm
Nissan Qashqai has three tire specifications, which are 215/60/R17, 215/55/R18 and 225/45/R19. Here is the relevant introduction about tires: 1. The meaning of tire model: For example, the 215/60/R17 tire, the first three digits indicate the tire section width; the middle two digits indicate the tire aspect ratio; the English letter represents the radial structure of the tire, and the last two digits are the outer diameter of the rim. 2. The meaning of tire graphic marks: If there is a small umbrella mark on the sidewall, it means that this tire is suitable for driving in rainy or slippery road conditions. The DOT mark indicates that this tire has passed the certification of the US and Canadian transportation departments.
Was this review help?
4
2
Share
EzraLynn
08/12/25 1:56am
As a daily driver, I've owned the older model Nissan Qashqai, and tire sizes typically vary by year and trim. For example, the first-generation Qashqai (2007-2013) had 205/65R16 tires for lower trims, while higher trims might come with 215/60R17. Always verify with the owner's manual or VIN for exact specifications. Choosing the right size is crucial as it affects ride comfort and fuel efficiency; switching to winter tires enhances traction in cold months. I recommend regular checks on tire pressure and tread wear to prevent blowouts. Older tires are prone to aging—replacing them within five years is safer. From personal experience, don't skimp on this; safety comes first.
Was this review help?
9
4
Share
Expand All
More Forum Discussions

Which Lane Should Motorcycles Use?

Motorcycles are classified as motor vehicles and should use the motor vehicle lane. Below is relevant information about motor vehicles: 1. The definition of a motor vehicle is a wheeled vehicle driven or towed by a power device, used for transporting people or goods, or for specialized engineering operations on roads. This includes two-wheeled motorcycles and mopeds, both of which are considered motor vehicles. 2. On the carriageways of highways and urban roads, the lane from the first vehicle division line on the right to the center line is designated for motor vehicles. This lane is exclusively for motor vehicle use, so motorcycles should ride within this carriageway.
2
1
Share

What are the steps for removing the headliner of an 8th-generation Accord?

Steps for removing the headliner of an 8th-generation Accord: First, remove the three clips at the rear end of the headliner, then detach the C-pillar trim covers, followed by the four grab handles. Next, remove the sun visors, and finally, detach the B-pillar trim covers near the seat belts. Below is some related information: 1. The car headliner is an important part of the vehicle's interior. It serves functions such as decoration, sound absorption, and heat insulation. In an era increasingly focused on high performance, environmental friendliness, and lightweight design, the interior headliner has become a significant factor in car selection, leading to higher demands on automotive interior components. 2. The primary material of the car headliner is polyurethane foam, which offers advantages such as lightweight, heat insulation, and excellent elasticity.
9
1
Share

What is Engine Compression Ratio?

The ratio of the maximum volume of the cylinder at bottom dead center to the minimum volume at top dead center is the compression ratio. Below is an introduction to compression ratio: 1. Compression ratio refers to the degree to which the engine's air-fuel mixture is compressed. It is expressed as the ratio of the total cylinder volume before compression to the cylinder volume after compression. 2. Compression ratio is closely related to engine performance. The higher the compression ratio, the greater the engine's power. (V swept volume by piston + V combustion chamber volume) / V combustion chamber volume. 3. An engine with a compression ratio of 10 compresses the combustible mixture to 1/10 of its original volume. An excessively high compression ratio can reduce stability and shorten engine lifespan.
14
3
Share

How to Open the Front Hood of a Jinbei Vehicle?

Jinbei F50 hood opening method: Locate the hood release button on the driver's side leg area, then pull the button upward. Below is relevant information about the Jinbei F50: 1. Exterior design features a dignified and generous front fascia with a dual-slat chrome grille, LED daytime running lights, and electrically adjustable mirrors with integrated turn signals. 2. Dimensions measure 4745/1810/1845mm (L/W/H) with a 2860mm wheelbase. The vehicle adopts a "2+2+3" 7-seat layout similar to premium MPVs, prioritizing daily convenience and practicality. 3. The interior combines black and brown color schemes, featuring a simple three-spoke steering wheel and dual circular instrument cluster. IKEA-inspired models come equipped with an 8-inch touchscreen on the center console.
11
4
Share

Can I Switch from 98 Octane to 95 Octane Gasoline?

You can switch from 98 octane to 95 octane gasoline. Here are the reasons why it's acceptable to use 95 octane after running out of 98 octane: 1. Avoid mixing different octane grades of gasoline. If you previously used 98 octane gasoline, you should continue using 98 octane for your next refuel. In special circumstances, using 95 octane once won't cause major issues, but prolonged use may lead to engine knocking, increased carbon deposits, and higher fuel consumption. 2. Similarly, if you've been using 95 octane gasoline, adding 98 octane once or twice won't have significant impact, but long-term mixing should be avoided. If you want to change gasoline grades, it's best to wait until the fuel gauge light comes on before refueling with the new grade, or directly drain the remaining fuel before switching. Never mix different octane grades directly.
13
0
Share

Where is the oil dipstick for the BMW X1?

BMW vehicles use a different type of oil dipstick compared to other models, employing an electronic system for recording. BMW's electronic system records and reflects the condition and quantity of engine oil to the driver through this system. Owners can schedule maintenance at 4S dealerships based on the intervals prompted by the system or the recommendations from the dealer. Below is an introduction to the related content: 1. The after-sales maintenance standards implemented by BMW differ from those of other car brands, as there is no fixed maintenance interval. The official recommendation is to perform maintenance based on the prompts from the vehicle's system, known as the CBS (Condition Based Service) system, which provides alerts according to the actual wear and tear of the vehicle. 2. The first maintenance interval for BMW vehicles is between 10,000 to 12,000 kilometers. Depending on the driving conditions of the car, the CBS system may prompt different maintenance intervals.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.